How to Make a Didgeridoo out of PVC Pipe

PDF download Download Article
PDF download Download Article

A didgeridoo is a simple but fun instrument that you can make out of plastic pipe.

Steps

PDF download Download Article
  1. The length will determine the pitch of your didgeridoo. It's easier to estimate longer, you can always cut it down. A length of 51.5" (including the mouthpiece) will tune your didgeridoo to a low C. [1]
  2. This will make the mouthpiece. [2]
    Advertisement
  3. These tend to send off ribbons and hangnails that will only impede your airways. A wire brush is ideal for this task, but you can shave off excess PVC with a pocketknife if need be. [3]
  4. Place the coupling firmly onto the end of the pipe. Fit the bushing into the coupling. You now have an assembled didgeridoo! [4]
    5. Advertisement


Community Q&A

Search
Add New Question
  • Question
    What can I use instead of the female-female coupler?
    Justjaythings
    Community Answer
    You could use two different pipe sizes that fit into each other. You simply have to use a sealing for the air to stay in the didge. Alternatively, just use a single, longer pipe.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 12
  • Question
    How does the sound work with this?
    Community Answer
    The sound is made by the buzzing of the lips, similar to a brass instrument. The sound resonates, with the horn producing frequencies that can be altered by how the lips are buzzed.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 15
  • Question
    How do I play a didgeridoo?
    Community Answer
    You just blow into it as hard as you can and that makes the sound come out! The pitch is determined by the length of the tube.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 90 Helpful 5
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Alternate Method

      1. Buy a 2 inch (5.1 cm) diameter PVC pipe that is 4 to 6 feet (1.2 to 1.8 m) long. Get a block of beeswax, acrylic paint, a bulb planter, a glass beverage bottle, a rounded head bolt, and a hot air gun.
      2. Take the pvc and heat the end until it is all loose. Then stick the glass bottle in it. This will begin your bell. Let it cool down, then heat it again and stick the bulb planter in it with wd40 on it first, then that should give you a bell.
      3. Heat any area and press the head of the bolt on the heated pvc. Do this everywhere.
      4. Take a rough grain sandpaper and sand the pvc, then prime the pipe let it dry.
      5. Paint your didgeridoo with the acrylic.
      6. Make your mouthpiece out of the beeswax. [5]
      7. Give it a blow!

      Tips

      • Tune your didgeridoo by ear - the length determines the pitch.
        Thanks
        Helpful 19 Not Helpful 12
      • Advanced didgeridoo players may choose to make a mouthpiece out of beeswax, to make a more custom fit for the lips. Wax molds better to the mouth than plastic, but this simple mouthpiece can get you started.
        Thanks
        Helpful 8 Not Helpful 5
      • While using a heat source to bend PVC pipe, the pipe should be filled with sand to prevent wrinkles and creases.
        Thanks
        Helpful 12 Not Helpful 13
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • You may wish to wear a dust mask or respirator when working with heating the pipe, but these may not provide full protection from the toxic vapors. It's worth mentioning again, ALWAYS work outside when heating PVC!
        Thanks
        Helpful 9 Not Helpful 6
      • A hardware store may only allow you to buy a ten-foot length of PVC pipe, but they will usually cut it for you if you ask.
        Thanks
        Helpful 4 Not Helpful 5
      • If you're using a blow torch observe all warning labels on the fuel tank and nozzle! Propane is dangerous and must be used with caution.
        Thanks
        Helpful 1 Not Helpful 1
      • If you wish to use heat to bend or twist your PVC didgeridoo, be absolutely sure to do it outside! PVC releases toxic fumes when heated, and bad things could happen to your lungs if you inhale too much of the vapor.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      • PVC pipe, 1-1/2", 5–6 feet (1.5–1.8 m) length.
      • PVC Female-Female 1-1/2" coupling
      • (Alternative: 22.5 degree Female-Female 1-1/2" joint)
      • 1-1/2" to 1" PVC bushing

      You Might Also Like

      How to
      Play the Didgeridoo
      How to
      Create a DIY Bamboo Flute
      How to
      Build Your Own DIY Theremin from Scratch
      How to
      Make Drums for Kids
      How to
      Make Musical Instruments with Recycled Materials
      How to
      Build a Wooden or Pipe Xylophone
      How to
      Build a Violin
      How to
      Make a Rain Stick
      How to
      Make Maracas
      How to
      Make a Harp
      How to
      Make a Transverse Flute from Household Supplies
      How to
      Make a Harmonica
      How to
      Make a Chinese Gong
      How to
      Make a Dizi
      Advertisement

      References

      1. ↑ https://www.makery.info/en/2016/12/20/un-didgeridoo-fait-main-en-pvc-pour-souffler-le-bonheur/
      2. ↑ https://www.youtube.com/watch?v=7-4iolIHPBI
      3. ↑ https://www.makery.info/en/2016/12/20/un-didgeridoo-fait-main-en-pvc-pour-souffler-le-bonheur/
      4. ↑ https://www.youtube.com/watch?v=7-4iolIHPBI
      5. ↑ https://how2today.wordpress.com/2013/03/13/didgeridoo-mouthpiece-making/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 220,779 times.

      Did this article help you?

      Advertisement