Download Article
Download Article
Magnets are made by exposing ferromagnetic metals like iron and nickel to magnetic fields. When these metals are heated to a certain temperature, they become permanently magnetized. It's also possible to temporarily magnetize them by using a variety of methods you can try safely at home. Learn how to make a paperclip magnet, an electromagnet, and a magnet you can use as a compass.
Steps
-
Gather supplies. A simple temporary magnet can be made with a tiny piece of metal, such as a paperclip, and a refrigerator magnet. Gather these items as well as a smaller piece of metal, such as an earring back or a tiny nail, that you can use to test the magnetic properties of the magnetized paperclip.
- Experiment with different paperclip sizes, and uncoated versus coated paperclips.
- Gather smaller objects in a range of sizes and metals to see which ones will stick to the paperclips.
-
Rub the magnet against the paperclip. Move it in the same direction, rather than back and forth. Use the same quick motion you'd use to light a match. Continue rubbing the paperclip with the magnet 50 times, as quickly as you can. [1] X Research sourceAdvertisement -
Touch the paperclip against the smaller piece of metal. Does the small piece of metal stick to the paperclip? If so, you've successfully magnetized it. [2] X Research source
- If the metal won't stick to the paperclip, rub it 50 more times and try again.
- Try picking up other paper clips and larger objects to determine how strong the magnet is.
- Consider recording the length of time the paper clip stays magnetized after a certain number of rubs. Experiment with different types of metal, like pins or nails, to see which one makes the strongest, longest-lasting magnet.
Advertisement
-
Gather supplies. Electromagnets are created by running an electric current through a piece of metal to create a magnetic field. This can be done on a small scale using these supplies, which are available at hardware stores:
- A large iron nail
- 3 feet of thin coated copper wire
- A D-cell battery
- Small magnetic objects, like paperclips or pins
- Wire strippers
- Masking tape
-
Strip the ends of the wire. Use the wire strippers to remove a few centimeters of insulation from either end of the copper wire. The uninsulated ends will be wrapped around the ends of the battery. [3] X Research source
-
Wrap the nail. starting about 8 inches from the end of the wire, wrap the nail tightly. Each wrap should be touching the last, but don't overlap them. Continue wrapping until the nail is covered from head to tip. [4] X Research source
- Make sure you wrap in the same direction down the nail. In order to create a magnetic field, the electricity must flow in the same direction.
-
Connect the battery. Wrap one end of the exposed wire around the positive side of the battery and the other end around the negative side of the battery. Use a small piece of masking tape to secure the wire in place on both sides. [5] X Research source
- Don't worry about which end of wire you attach to which end of the battery. The nail will become magnetized either way; the only difference is that its polarity will change. One side of the magnet is the north pole, and one side is the south pole. Reversing the wires will also reverse the poles.
- Once the battery is attached, the wires will grow hot as electricity begins passing through them, so be careful not to burn yourself.
-
Use the magnet. Place the nail near a paperclip or another small piece of metal. Since the nail is magnetized, the metal will stick to the nail. Experiment with different sizes and weights to see how much strength your magnet has.
Advertisement
-
Gather supplies. A compass works by indicating north with a magnetized needle that aligns with the earth's magnetic field. Any metal that can be magnetized can be turned into a compass. A sewing needle or straight pin is a good choice. In addition to a needle, gather these supplies to make your compass:
- A magnetizer. Find a magnet, a nail, or even a piece of fur to magnetize the needle.
- A cross section of cork. Slice a disc from an old wine cork to provide a base for the compass.
- A bowl of water. Suspending the compass in water allows the magnetized needle to align with the earth's magnetic poles.
-
Magnetize the needle. Rub the needle using a magnet, a nail, or a piece of fur, which creates a small electric current. Rub the needle in the same direction at least 50 times to magnetize it. [6] X Research source
-
Stick the needle through the cork. Slide it in horizontally, so that the needle pierces on side of the cork and comes out the other side. Keep pushing until the front and back of the needle protrude equally from the cork.
- If the needle you're using is too big to push through the cork, you may simply rest it on top of the cork.
- If you don't have a cork coin, use another lightweight object that floats, such as a leaf.
-
Float the magnet. Place the magnetized needle on the surface of the water in the bowl. Watch as it moves to align itself from north and south along the poles. If it doesn't move, remove the needle from the cork, rub it 75 times with the magnetizer, and try again.
Advertisement
Community Q&A
Search
-
QuestionIs a magnet natural or manmade?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerA magnet can be either natural or manmade. In nature, magnetite (also known as lodestone) is a strong, permanent natural form of magnet that was used for centuries in compasses and other objects as a magnet. Other natural magnets are weak (pyrrhotite, ferrite, and columbite), so aren’t of much use as a magnet. Manmade magnets are far more commonplace in everyday use today and come in either temporary or permanent forms.
-
QuestionHow do you magnetize a piece of metal?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerYou can magnetize metal with another magnet, by striking it, with a battery or by using special tools. For more help in a detailed way, see How to Magnetize Metal . If you’re using steel, each of these methods is explained in detail here: How to Magnetize Steel .
-
QuestionWhere do magnets originate?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerMagnets can be found in nature (magnetite, also known as lodestone) but most are made by humans.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Make sure to keep rubbing it in the same direction.Thanks
- Try with something small to pick up with the magnet.Thanks
- The more times you rub the paper clip across the magnet the more it will hold.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Magnets can also erase phone SIM cards, so beware.Thanks
- Magnets can mess up TVs and Monitors (although the paperclip magnet you made probably won't)Thanks
- You may need adult supervision if handling these objects seem new to you.Thanks
Advertisement
References
- ↑ https://sciencing.com/magnetize-things-6377.html
- ↑ https://sciencing.com/magnetize-things-6377.html
- ↑ https://education.jlab.org/qa/electromagnet.html
- ↑ https://education.jlab.org/qa/electromagnet.html
- ↑ https://education.jlab.org/qa/electromagnet.html
- ↑ https://sciencing.com/magnetize-things-6377.html
- http://education.jlab.org/qa/electromagnet.html
- http://marshallbrain.com/science/electromagnets.htm
About This Article
Article Summary
X
To make a magnet, start by removing 1-2 inches of insulation from both ends of a copper wire. Next, wrap the wire tightly around a nail, starting about 8 inches from the end of the wire and working your way down until the nail is covered from head to tip. Wrap 1 end of the exposed wire around the positive side of a D-cell battery, then wrap the other end around the negative side. Hold the nail next to a small piece of metal to test the magnetism! To learn how to make a compass magnet, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,058,861 times.
Reader Success Stories
- "I am preparing a lesson on magnetism for a children's nature camp. We will make our own magnets thanks to you!"
Advertisement
"I am preparing a lesson on magnetism for a children's nature camp. We will make our own magnets thanks to you!"
"Thanks. it is helpful for my daughter."
"I am running a summer STEM camp and this Saturday is all about magnets. This was very helpful in setting up the activities."
..."
more
"I have done a magnet before, your article helped me understand more about the process of magnetizing an object."
"This helped me a lot, especially with the help of images. They made the descriptions easier to understand."
