How to Make a Trap

PDF download Download Article
PDF download Download Article

Out in the wilderness, knowing how to make a trap can be the difference between eating and going hungry. Although most of these traps are reserved for specific survival situations, knowing how to make them is a valuable skill for catching small game, birds, and fish. Just don't practice them in the wilderness without checking your municipality's regulations on hunting—in most areas of the world, using these traps to kill an animal is illegal.

Method 1
Method 1 of 3:

Making a Small Game Trap

PDF download Download Article
  1. Each starts with an engine, which is a young tree that connects to the snare that catches the small game. The snare is made up of a noose that is connected to a hook stick, which is connected to a base stick in the ground via a notch. The hook stick is also connected to the engine's branch via leader line connected to its top. When the animal walks through the nose, the sticks come loose and the leader line pulls the noose upward, trapping the animal.
    • The connection between the 2 sticks is called a hook trigger.
    • The tension between the engine's brach pulling upward on the leader line and the base stick keeping the hook stick steady is what holds the force that pulls that animal up using the noose.
  2. The tree will act as the engine, so choose one that is young and strong, but not so much that it can't bend. Take a walk through potential locations and look for shelters, tracks, scratches, and other signs of animal activity. [1]
    • Choose a tree strong enough to hold your game in the air until you find it.
    Advertisement
  3. If you can, use craft wire, picture hanging wire, or copper strands. If you use another material, make sure it's flexible enough to tighten quickly when pulled up but strong enough to hold small game in the air. [2]
    • Alternative materials include shoe strings, dental floss, and fishing line.
    • If you're going to be in the wilderness with no preparation, use natural noose material like dogbane, milkweed, and stinging nettle.
  4. Create a "U-shaped" bend (also known as a bight) with its opening on the left side. Create another bight at the end of the first one bending back in the opposite direction to create an "S" shape. Put the end of the material under all 3 legs and wrap the end over them—continue this motion at least 6 more times. Make sure that the top of the second bight is poking out above the topmost turn to form a loop. Pass the free end of the material through the loop formed by the second bight from front to back. [3]
    • Make sure that all 3 legs of the "S" are parallel.
    • Tighten each turn one by one as you make them.
    • You can make more than 7 turns, but always use an odd number so that you can finish off the knot properly.
    • Finish your noose by pulling down on the right-hand edge of the noose created by the first bight to tighten it.
  5. If you're using wire, create your loop by forming a circle with one end and then twisting the free end back onto itself multiple times. For string, fold the free end back onto itself and then tie an overhand knot . After creating a loop, take the other free end of the material and run it through the loop. [4]
    • Tie an overhand knot by gripping the end of the noose material 2 to 3 inches (5.1 to 7.6 cm) from the end. Pass the material over the point you're gripping (called the standing part) and tuck it inside the loop from the other side. Pull it out through the loop toward you. Now, pull both ends away from each other to tighten.
  6. Find a stick that is a hardwood species like ash, oak, hickory, maple, or osage. Angle a knife or cutting tool like a axe or saw 45 degrees toward the stick and make small, even strokes away from you. Continue removing strips of the stick while rotating it until you create a pointed end. [5]
    • Make sure that the point is sharp enough to penetrate soil.
  7. The hook stick is going to be attached to the noose at one end and the leader engine at the other. In addition, its notch will fix it to the ground stick.
    • Try and find a stick that is as close in thickness to the base stick as possible.
  8. Start by marking the lines of the notch with a knife. Make sure that each notch is around 2 to 3 inches (5.1 to 7.6 cm) long and begins about 2 to 3 inches (5.1 to 7.6 cm) from the tip of the sticks. [6]
    • Connect the sticks via their notches when you're done. Make sure you can pull them in opposing directions when they're connected without them sliding apart.
  9. Connect the free end to the location on the hook stick right about the notch that connects it to the base stick. After tying the noose to the hook, pull upward on the string and down on the hook to ensure it doesn't come off.
    • Make sure to tie the noose to the stick as tightly as possible.
  10. Double-check that the hook's noose is tied just above the notch. Now, tie the leader line to the free end of the hook and then tie the free end of the leader line to the sapling you have selected as your engine. Tie the knot approximately 6 to 12 inches (15 to 30 cm) from the top of the sapling's branch and then pull the hook down to the base stick to make sure it can reach it.
    • Test the sapling to ensure that it's sturdy enough to connect to the base piece. If it's too loose, cut the string down smaller. If it's too tight to reach the base piece without breaking the branch, remove the leader line and create another one that's longer.
  11. Be sure the sapling is bent at a 90-degree angle after connecting the sticks. Make sure that the noose is on the ground in front of it and the loop is open so that it can catch your prey.
    • Your snare trap is now ready! Test it out by placing a stick into it to set off the trigger.
    • To disarm the trap, detach the hook stick from the base stick.
    12. Advertisement
Method 2
Method 2 of 3:

Creating a Fish Trap

PDF download Download Article
  1. Any kind of plastic bottle will work for this trap. Insert the knife horizontally into the bottle at the point where the curve straightens out. Hold the bottle steady and move the knife in and out while pulling it steadily around the bottle's circumference. [7]
    • Be sure to hold the bottle at a point away from the cutline so you don't cut yourself.
  2. Hold the opening of the bottle upward. Turn the top so that the tip is facing down and into the opening. Shove it downward gently until it fits snugly into the bottle. [8]
    • If the top is a bit loose after inserting it into the bottle, don't worry—you can fix it with screws afterward.
  3. After inserting the top, hold the bottle on its side on a flat surface. Angle an electric drill tip onto the spots for the screw holes at a 45-degree angle downward. Hold the bottle steady and drill the holes. Afterward, insert screws through the holes and cap them off with nuts to fix the top piece of the bottle to the bottom. [9]
    • Use small 304 stainless steel M3*8 (3 mm x 6 mm) screws with M3 nuts, if possible.
    • If you don't have an electric drill, use a tack to make the initial holes. Afterward, press the screws through with your hands or a screwdriver.
  4. Dump some pebbles or small rocks through the opening. Don't fill it too much—just enough so that the trap will anchor to the floor of the lake. Afterward, add some small scraps of bait, insects, or fish food to attract fish. [10]
    • Use fish bait like worms, maggots, hotdogs, or cereal for the best results.
  5. Once you place your bottle, it's time to wait. After the fish swim through the hole, they won't be able to swim out. Continue creating and placing traps to increase your chances of catching fish. [11]
    • To use your trap in a portable manner while you travel, dip it into densely populated areas and drag it through the water. Do this periodically and you might get lucky!
    6. Advertisement
Method 3
Method 3 of 3:

Crafting a Bird Trap

PDF download Download Article
  1. Wear some old clothing and gloves. Using a small knife, remove the outer layer of resin from local pine trees. After removing it, scrape it into a glass jar with a hunting knife. During cold weather, you might need to break the resin off instead of scraping it. [12]
    • To remove pine resin from your skin, rub some melted animal fat onto it and then wash it with water and soap.
    • If you can't find pine trees, look for any tree with a sappy resin on its bark, also known as pitch.
  2. Drag your knife along the inside of your glass jar. Now, rub the pine sap along the inside of the plastic cup with your knife. Continue rubbing it on until there is a thin layer of sap around the inside. [13]
    • Use Dixie cups for the best results.
  3. Purchase some bird seeds or other bait, such as peanuts, millet, or safflower seeds. Sprinkle them generously into the inside of the cup. Cover the top of the cup with your hand and shake it around. Continue spreading and shaking the seeds until there is a layer of seed along the inside. [14]
    • Spread the seeds along the inside of the cup with a knife to ensure an even layer of bait.
  4. Open regions near trees and vegetation and areas that overlook vantage points—like trees and power lines—are ideal. Aside from chirping and bird noises, look for the common perching locations, such as beside or above the area that they nest. [15]
    • Male birds often sing to mark territorial boundaries – mark these locations on your map and you can determine the location of their nest.
    • Females often call to their mates on their way to the nest—listen for these calls to help you plot the to their nesting location!
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I make a humane trap?
    Ky Furneaux
    Survival and Outdoors Expert
    Ky Furneaux is a survival expert, outdoor guide, and professional stuntwoman based in Australia. She’s been featured in over 100 films and TV productions, and has hosted, produced, and participated in some of the most extreme TV survival shows including MTV’s Made and Discovery’s Naked and Afraid. She has authored 5 survival books, including "The Superwoman’s Survival Guide" and "Survive: The All-In-One Guide to Staying Alive in Extreme Conditions", with the goal of sharing her knowledge of survival techniques with others. As an accomplished stuntwoman, she won a Taurus Award in 2012 for Best Female Stunt Performer and has doubled stars like Jennifer Garner, Anne Hathaway, Jaime Alexander, and Sharon Stone.
    Ky Furneaux
    Survival and Outdoors Expert
    Expert Answer
    You first need to assess your surroundings and consider the type of animal you're trying to catch. The goal is to use a system that quickly incapacitates the animal without causing harm. You’ll want a fast-closing trap that either traps or holds the animal securely until you can release it. Depending on what you’re trapping, you might need to choose between a deadfall trap or a snare, both of which can be effective. A deadfall relies on a weighted object that falls to trap the animal, while a snare works by tightening around the animal as it moves through the trap. Also look at the materials that's available to you—whether it's a box, sticks, rocks, or wire—then design your trap accordingly. Make sure the trap is strong enough to hold the animal without injuring it. The key here is to act quickly and check your traps regularly so you can safely release the animal as soon as you catch it. This way, you’re trapping for control or relocation and not harm. Lastly, always follow local regulations when setting your traps.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You'll Need

      Making a Small Game Trap

      • Noose material
      • Leader line material
      • Measuring tape
      • Pencil
      • Sticks

      Creating a Fish Trap

      • Hunting knife
      • Pop bottle
      • Electric drills
      • Small 304 stainless steel M3*8 (3 mm x 6 mm) screws
      • M3 nuts

      Crafting a Bird Trap

      • Pine resin
      • Small plastic cup

      Tips

      • Keep lures and baits in separate containers from your traps and the gloves you use to set them.
        Thanks
        Helpful 3 Not Helpful 0
      • Look for tracks along thin portions of brush or wooded areas near ponds, streams, and fields.
        Thanks
        Helpful 3 Not Helpful 0
      • If you're hunting in thicker woods, look for tracks around game and ATV trails.
        Thanks
        Helpful 2 Not Helpful 2


      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Aim a Pistol
      How to
      Clean a Deer Skull
      How to
      Dress a Deer
      How to
      Make Snare Traps
      2 Effective Ways to Tan a Hide at Home
      How to
      Skin a Deer: Step-by-Step Instructions & Pictures
      How to
      Tan a Deer Hide
      How to
      Call Deer
      How to
      Make a Rabbit Snare
      How to
      Field Dress a Deer
      How to
      Skin a Raccoon
      How to
      Skin and Gut a Rabbit
      How to
      Mount Antlers
      How to
      Clean a Deer
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about outdoor survival skills, check out our in-depth interview with Ky Furneaux .

      References

      1. ↑ https://www.artofmanliness.com/articles/how-to-build-a-small-game-survival-snare/
      2. ↑ https://www.artofmanliness.com/articles/how-to-build-a-small-game-survival-snare
      3. ↑ https://www.youtube.com/watch?v=cJwsJXbS_Ok
      4. ↑ https://www.artofmanliness.com/articles/how-to-build-a-small-game-survival-snare/
      5. ↑ https://www.outdoorlife.com/blogs/survivalist/survival-skills-make-fire-hardened-spear
      6. ↑ https://www.artofmanliness.com/articles/how-to-build-a-small-game-survival-snare/
      7. ↑ https://offgridsurvival.com/fishing-trap/
      8. ↑ https://offgridsurvival.com/fishing-trap/
      9. ↑ https://offgridsurvival.com/fishing-trap
      1. ↑ https://offgridsurvival.com/fishing-trap/
      2. ↑ https://offgridsurvival.com/fishing-trap/
      3. ↑ https://www.outdoorlife.com/photos/gallery/survival/2013/03/how-build-trap-15-best-survival-traps#page-12
      4. ↑ https://www.outdoorlife.com/photos/gallery/survival/2013/03/how-build-trap-15-best-survival-traps#page-12
      5. ↑ https://www.outdoorlife.com/photos/gallery/survival/2013/03/how-build-trap-15-best-survival-traps#page-12
      6. ↑ https://nestwatch.org/learn/how-to-nestwatch/how-to-find-nests/

      About This Article

      Article Summary X

      To make a bird trap, start by removing the outer layer of resin from local pine trees and scraping it into a glass jar. Next, line the inside of a plastic cup with your pine sap. Then, sprinkle bird seed or bait into the cup, making sure to coat the inside of it thoroughly. Finally, put the cup on its side in an open area with a lot of bird activity. To learn how to make small game traps, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 55,279 times.

      Did this article help you?

      Advertisement