If you’ve ever seen mold in your car, you’ve probably wondered how it got there and, more importantly, how to get rid of it. Cleaning up mold is a little different than cleaning up normal dirt and grime that builds up on the surfaces of your car. Mold can cause health issues, so it’s especially important to take care of it as soon as possible. We spoke with House Cleaning Professional Dario Ragnolo and Cleaning Expert Ilya Ornatov from NW Maids to learn how to clean up a mold infestation. This article covers getting rid of mold, what cleaning agents to use, and how to prevent it. Plus, we’ll tell you why mold grows in cars and any health risks that are associated with it.
Removing Mold in a Car: Quick Steps
- Air out your car and make a note of where mold is growing.
- Wear gloves, a mask, and goggles to vacuum out the car.
- Spray the mold with a cleaner and let it sit for at least 10 minutes.
- Use a soft-bristle brush to scrub the moldy areas.
- Thoroughly re-vacuum the entire car.
- Let the car completely dry before closing it up again.
Steps
Getting Rid of Mold in a Car
-
Open all the doors to air out your car. Mold thrives in a damp environment. Opening all the doors helps to dry out your car. [1] X Research source Park the car in a sunny area to allow the heat of the sun to help with the drying process.
-
Vacuum the entire car, focusing on the mold. Once your car has dried out, use a wet/dry vacuum cleaner with a HEPA filter to go over the entire interior of the car. Make sure to wear a mask, gloves, and eye protection to prevent fungal lung, eye, and skin irritation. [2] X Research source
- Choose an N95 respirator mask , long rubber gloves , and goggles without ventilation holes to keep mold and mold spores out of your eyes and lungs. [3] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
Advertisement -
Use water mixed with a mild detergent and brush to clean the mold. Mix 2-3 drops of dishwashing liquid in 1 gallon (3.78 L) of water. Dip the soft-bristled brush in the soapy water and gently scrub the spots of mold. [4] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source It’s not necessary to kill the mold. As long as you address any moisture problems in the car, the mold spores can’t grow. [5] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
- However, to ensure the mold is no longer active, mix no more than 1 cup (240 mL) of bleach with 1 gallon (3.78 L) of water and apply the mixture directly to the mold to kill it.
- There are a few other options to make sure the mold is dead.
- Specialized mold removers
- Undiluted 3% hydrogen peroxide [6] X Trustworthy Source University of Georgia Cooperative Extension Division of the University of Georgia focused on research and community education Go to source
- 1 cup (204 g) of Borax mixed with 1 gallon (3.78 L) of water [7] X Research source
- Undiluted vinegar [8] X Research source
- 1 teaspoon (5.69 g) of baking soda mixed with 2 cups (470 mL) of vinegar [9] X Research source
- Ornatov recommends soaking the area in a solution of 2 cups (470 mL) of vinegar to 1 cup (240 mL) of water and leaving it sit for 30 minutes. Then, wipe clean.
- NEVER combine bleach and ammonia. They produce a toxic vapor when they are mixed.
- Bleach also reacts with hydrogen peroxide and other cleaning products, so only mix it with water to be safe. [10] X Research source
-
Vacuum the interior of your car again. Go over your car again with a wet/dry vac to pick up as much mold as possible. The wet/dry vac also helps remove excess water in your car.
- Optional: Follow up with a steam cleaner to remove mold in hard-to-reach areas.
-
Allow your car to dry out completely before closing the doors. If you don’t allow your car to dry completely before closing it up again, the mold will likely return. So, make sure every surface in your car’s interior is completely dry. If possible, use fans to help any moisture dry. [11] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source
- Optional: Use baking soda to deodorize your car’s interior and eliminate musty smells.
Expert Q&A
Video
Tips
References
- ↑ https://youtu.be/eNMSaabPl2A?t=15
- ↑ https://youtu.be/eNMSaabPl2A?t=19
- ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home
- ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home
- ↑ https://www.epa.gov/mold/should-i-use-bleach-clean-mold
- ↑ https://extension.uga.edu/publications/detail.html?number=C1047-2&title=removing-mold-in-your-home
- ↑ https://extension.msstate.edu/sites/default/files/newsletter/dawg-tracks-safety-talk/2016/dts_16_201606.pdf
- ↑ https://extension.msstate.edu/sites/default/files/newsletter/dawg-tracks-safety-talk/2016/dts_16_201606.pdf
- ↑ https://nchh.org/information-and-evidence/learn-about-healthy-housing/health-hazards-prevention-and-solutions/mold/
- ↑ https://doh.wa.gov/community-and-environment/contaminants/bleach-mixing-dangers
- ↑ https://www.consumerreports.org/cars/car-maintenance/how-to-clean-your-cars-interior-a8146415264/
- ↑ https://youtu.be/Es6EQNPXb2c?t=195
- ↑ https://www.osha.com/blog/identifying-mold-types
- ↑ https://my.clevelandclinic.org/health/diseases/24862-black-mold
- ↑ https://www.lung.org/clean-air/outdoors/what-makes-air-unhealthy/transportation/air-pollution-in-your-car
- ↑ https://www.epa.gov/mold/mold-and-health
- ↑ https://www.ncbi.nlm.nih.gov/books/NBK542329/
- ↑ https://www.mayoclinic.org/diseases-conditions/mold-allergy/symptoms-causes/syc-20351519
- ↑ https://www.aaaai.org/conditions-treatments/related-conditions/allergic-bronchopulmonary-aspergillosis
- ↑ https://www.uwyo.edu/safety/_files/docs/factsheets/thefactsaboutmold.pdf