PDF download Download Article PDF download Download Article

Fiberglass was the wonder material of the 1960s. It is light, durable, and cheap, which has led to it being used to build everything from Corvettes to Eames chairs. It is, however, somewhat complicated to resurface and paint when it gets old and faded. This guide will teach you how to do both of those things on your precious Eames or other model of fiberglass chair.

  1. Be sure to wash off all debris no matter how small, especially oil grease.
  2. Advertisement
  3. Sand down the surface, preferably with an orbital sander [1] .
    • Fiberglass can release glass dust into the air when sanded, which is dangerous to inhale and can irritate skin.
    • To prevent this, wet the areas of the chair you're about to sand with water as you go. The water will trap the dust and keep it out of the air.
  4. Let it dry.
    • If you're using the recommended paint sprayer, fill the sprayer's tank with your primer mixture and spray on the chair from there.
    • If you're stuck using a paint brush, just dip and prime.
  5. Now you're ready to paint!
  6. Let the paint dry, then repeat the process.
    • Apply 2 to 3 coats.
    • If you're using the paint sprayer wash the primer out of it first.
  7. Use the sprayer if you have it or the brush if your don't.
    • Penetrol is an effective and widely available top coat option in the US.
    • Be especially careful if using a brush for this step. Brush marks made here will be painfully visible.
  8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Would a fiberglass outside garage door need to be painted or sealed?
    Community Answer
    Normally not. Fiberglass products usually come with a Gelcoat finish and need only be wiped or washed with dish soap and hot water. Older chipped or broken products can often be repaired or restored to original luster with a Gelcoat repair kit, or buffing with fine polishing compounds.
Ask a Question
      Advertisement

      Tips

      • Gel-coat paint is designed specifically to be used on fiberglass. If you can find one in the color your want, go for it [2] .
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Wear thick rubber gloves, a respirator mask, and protective eye wear during this project, especially if you are working inside.
      • Painting outside increases the risk of getting dirt on your project but is also tremendously safer.
      • If you have sensitive skin you should think carefully before attempting this project. The fiberglass dust that will almost inevitably wind up in the air will be particularly bothersome for you.
      Advertisement

      Things You'll Need

      Required

      • Acrylic primer
      • Acrylic thinner
      • Paint (acrylic or gel-coat)
      • Metal paint spreader
      • Water
      • Detergent
      • #500 or similar grit sandpaper block
      • Soft bristle paint brush

      Recommended

      • Paint sprayer
      • Respirator mask
      • Rubber Gloves
      • Goggles or other protective eyewear
      • Orbital sander


      Expert Interview

      Thanks for reading our article! If you’d like to learn more about crafting, check out our in-depth interview with Diane Henkler .

      About This Article

      Thanks to all authors for creating a page that has been read 95,382 times.

      Reader Success Stories

      • Jill Adler

        Apr 26, 2016

        "This outdoor furniture is 39 years old, but I know it was very expensive! When you sit in the chairs the fiberglass ..." more
      Share your story

      Did this article help you?

      Advertisement