Download Article
Download Article
Pharmacists and chemists come across many naturally occurring organic mixtures and mixtures of chemical reactions in their work. As such, a High Performance Liquid Chromatography (HPLC) system is one of the most essential instruments for any lab. An HPLC instrument allows you to separate and analyze these mixtures (quantitatively and qualitatively). In this type of column chromatography, the particle size of the stationary phase is small enough that it makes it difficult for the solvent to pass through it; to overcome that, a high pressure of 3000-5000 psi is applied. It is the most sensitive, efficient and accurate technique.
Steps
-
Follow the rules and regulations and wear your apron.
- Clean the HPLC.
- Switch it on and wait for it to get started.
- Prepare the instrument for analysis.
- Keep the solvent/solvents in the mobile phase in solvent reservoir or solvent tray. Solvent is used to separate the components of the mixture. In modern instruments, the mixture of solvents can be used as mobile phase which is called gradient elution. Elution is the separation into components.
- Use methanol-water or chloroform-heptane etc as your solvent.
-
Select the types of HPLC based on the relative polarity of the phases:
- Normal Phase: Use a comparative polar stationary phase than mobile phase if doing normal phase HPLC.
- Reverse Phase HPLC: Use a less polar stationary phase as compared to mobile phase. Generally reverse phase is used.
Advertisement -
Feed the data into the system or program the HPLC.
- Assign the number to the solvents when you are opting for gradient elution.
- Specify the flow rate.
- Regulate the pressure of the pump.
-
Analyse your sample.
- Add your sample in the injector system. This is the mechanism which introduces the sample (the mixture to be separated) to the system.
- Load the stationary phase in the column.
- Start the HPLC by clicking on the start button on the screen of computer attached to it.
- Wait for some time for the separation of the mixture into components. The retention time is the time taken by solvent to separate the components, which is equal to the time when you enter the mixture in the column to when it is detected/analysed.
-
Develop your components. Wait for your mixture to be separated into its components. This is called development, when the sample contents will be detected by detector.
-
Observe the result. Look at the separation of components detected and recorded on graph. There will be various peaks corresponding to the components and their concentration.
-
Apply your findings to your work. There are many uses of HPLC in pharmacy, chemistry and industries like food production. Some of the significant applications are following.
- Use it for qualitative analysis by comparing retention time observed under identical conditions.
- Make use of HPLC for quantitative analysis, like assessing the concentration of components.
- Analyse lipid separation.
- Use it for answers in forensic work on criminal/poison cases.
Advertisement
Community Q&A
Search
-
QuestionWhy is so much high pressure applied?Mohsin257Community AnswerBecause the particle size of the stationary phase is small, and it's difficult for the mobile phase to pass through it. To overcome that, high pressure is applied.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Use a mobile phase such as methanol-water or aceto-nitrite for reverse phase HPLC.Thanks
- Use a mobile phase such as alcohol-heptane or chloroform-heptane for normal phase HPLC.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful while putting the data into the system; little mistakes will totally alter the result.Thanks
- After each analysis, run methanol as the mobile phase to wash and rinse the HPLC before another analysis.Thanks
- In liquid-liquid HPLC, the stationary phase and mobile phase shouldn't be miscible.Thanks
- Before leaving the lab, make sure you switch the HPLC off.Thanks
Advertisement
Things You'll Need
- Sample (natural organic extract/mixture)
- Mobile phase
- Stationary phase
- HPLC instrument
- Methanol
About This Article
Thanks to all authors for creating a page that has been read 46,132 times.
Reader Success Stories
- "I already knew the methodology and technique but tips are much more helpful."
Advertisement