How to Personalize a CD Without a CD Label Printer

Last Updated: June 7, 2022

CD label printers are all well and good, and look professional, but decorating the CD yourself is more personal and a gift with a memory attached to it.

1

Purchase the plainest and/or cheapest pack of CDs you can find.

Download Article

You can get more if you choose the kind that come in a plastic container rather than in their own slim jewel cases. Memorex and Sony are good brands.

2

Burn your CD.

Download Article

You can use any music burning software to do this.

3

Obtain a set of poster paints.

Download Article

Also, obtain a set of regular glass stains (or glitter, it doesn't much matter), preferably with some of the same colors as the poster paints. Both of these can be found in the craft section of your local store.

4

Grab some cotton swabs.

Download Article

They don't have to be Q-tips—brands with less cotton on the tips would work better. A box of 300 or so works.

5

Have a fan handy.

Download Article

Takes up very little room on the desk, has 2 speeds and is adjustable. Runs on just two D batteries, difficult to knock over, and has thick, soft foam blades that displace a lot of air.

6

Set up your workspace.

Download Article

As long as the environment is clean, sturdy and comfortable it doesn't matter.

7

Have paper towels or napkins nearby.

Download Article

Either grab a roll of paper towels or cut an old towel up into 12 x12 squares. When you're ready to start personalizing the CD, lay two paper towels (folded over to create a double layer the size of a single towel) or one towel square down flat on your worktable and place the burned CD on it, with the side that goes up in the player face-up. You can't paint the bottom .
- Here is where anyone who knows anything about paint might get confused. The surface of a CD is almost perfectly smooth, and paint won't stick to a smooth surface. You could sand the CD, and ruin it, or you could keep reading.

8

Expect to have to give your CD a second or even third coat.

Download Article

Work with one color at a time and dry between coats, using the fan. If you want to get creative and mix colors or paint and stain, then keep the fan off until you want to dry your work. If you want a solid color, work with the fan going. It dries the paint as you work, so you can start on a second coat directly after finishing the first.

9

Work slowly!

Download Article

Use a reference picture if you want, but originality is always smiled upon.

10

Write something on the CD.

Download Article

If you want to write something, like "Christmas 2021," paint a background for it first. Then, use a good quality felt-tip permanent marker. Seal it with a discreet coat of glass stain the same color as your background.
- Beware: Ballpoint pens are murder on CDs/DVDs. Use only as a last resort, with as little pressure as humanly possible and even then, if possible, limit ballpoint writing to the un-coated ring of clear plastic in the very center around the spindle hole.

11

Clean the back of the CD if it gets dirty.

Download Article

It can usually be cleaned off with water.

12

Play the CD!

Download Article

Paint the case if you want.

Community Q&A

Search

Add New Question

Question

Does it need to be poster paint?

Community Answer

Absolutely not, I use sharpies. I think anything except for watercolor paint will work.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 12
Question

Will the CD still work after painting it? Is it risky or completely safe?

Community Answer

The kind of inks/paints you use might affect the material of the CD over time. Water-based colors are probably better. The layer of paint might affect a "slit" CD-player (the ones without tray where the CD gets swallowed in).

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 5
Question

If I were to paint a CD with acrylic paint, would it be damaging (or even work, for that matter)?

Aditya Telang

Community Answer

It may work, but it will certainly be damaging to your CD/DVD and the CD/DVD drive of the computer. Paint starts to strip after some time. If it happens to do so while your CD/DVD is being read, it will certainly damage the readable side of your CD/DVD. It may also scratch and damage the lens of the laser.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 7

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

With some well-placed paper and masking tape, you can spray-paint designs on your CD.

Thanks
Helpful 3 Not Helpful 0
You could always just decorate it with a sharpie or other permanent markers.

Thanks
Helpful 5 Not Helpful 0
Use the poster paint to color an area, and then highlight it with glass stain of the same color. Makes it shiny.

Thanks
Helpful 1 Not Helpful 1

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Some CD players do not like decorated/painted CDs for whatever reason and refuse to play them.

Thanks
Helpful 15 Not Helpful 3
Make sure the CD is completely dry before handling it. Poster paints dry to a matte finish; glass stain retains a gloss. Tap with a cotton swab to test for dryness.

Thanks
Helpful 7 Not Helpful 2
Always use spray paint away from heat or flame and in a well-ventilated area.

Thanks
Helpful 4 Not Helpful 4

Things You'll Need

Computer with media player/cd burner software and hardware
Some means of getting the tracks you want
Poster paint and glass stain
Felt-tip marker(s)
Cotton swabs
Small portable battery-powered fan
Workspace
Time
Paper towels or squares of towel 12 x12
Trash can
Plain silver CDs
A creative mind
An appropriate CD case

For the Sharpie Tactic

Sharpies or other Permanent Markers (an arrangement of colors)
A CD
A computer with the data you’re burning onto it, and all the software and hardware needed
Paper to make the CD case OR a plastic or paper CD case

Log in

How to Personalize a CD Without a CD Label Printer

Steps

Purchase the plainest and/or cheapest pack of CDs you can find.

Burn your CD.

Obtain a set of poster paints.

Grab some cotton swabs.

Have a fan handy.

Set up your workspace.

Have paper towels or napkins nearby.

Expect to have to give your CD a second or even third coat.

Work slowly!

Write something on the CD.

Clean the back of the CD if it gets dirty.

Play the CD!

Community Q&A

Tips

Warnings

Things You'll Need

You Might Also Like

About This Article

Is this article up to date?

About This Article

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories