Download Article Download Article

It's important that you put out fires in your fireplace properly to avoid a hazard. Fortunately, two effective fire extinguishers, water and baking soda, are easy to find at home. Besides putting out the flames, you'll also need to dispose of the hot ash left over from the fire. By removing the ash properly and making sure the fire is completely out, you can enjoy your fireplace responsibly.

Method 1
Method 1 of 3:

Spraying with Water

Download Article
  1. Use a medium-size spray bottle as opposed to a cup or bucket to prevent splashing or excessive steam. Make sure there's enough water inside the spray bottle to extinguish the fire and dampen the firewood.
  2. You want the firewood and embers to be as open and flat as possible so they cool faster. [1]
    Advertisement
  3. Continue spraying until you've covered all of the firewood and embers. You want everything to be damp so the wood and embers cool down and go out. [2]
  4. There should be no flames or red, burning embers. If the fire restarts or the firewood and embers are still glowing hot, spray more water onto the fire.
  5. Advertisement
Method 2
Method 2 of 3:

Using Baking Soda

Download Article
  1. Try to create a flat, even layer that you can easily pour the baking soda over. [3]
  2. Continue doing this until all of the flames are extinguished. [4]
  3. Use any kind of store-bought baking soda; you just want enough of it to create a thin layer over the embers and wood. Baking soda contains sodium bicarbonate, which is also found in some fire extinguishers, and it will help smother the fire so it doesn't restart. [5]
    • Avoid using sand to smother a fire as it will be difficult to clean out of the fireplace.
  4. If the fire restarts, repeat the ash and baking soda steps until the fire is completely out.
  5. Advertisement
Method 3
Method 3 of 3:

Removing the Ashes

Download Article
  1. This will allow the ashes time to cool down. Never try to remove the ashes when the fire is still going. [6]
    • To give the ashes more time to cool down, leave them in the fireplace overnight. It's OK to leave the ashes unattended while you sleep, as long as the fire is completely out (there are no flames or red embers). [7]
  2. Don't worry about getting out any leftover wood; you just want to clear out the gray and black ash on the bottom of the fireplace. [8]
    • Remember that some embers may still be hot, even after the fire has been out for a while. Be careful when you're removing the ashes.
  3. Never dump ash into a paper, cardboard, or plastic container. Hot embers in the ash could burn through the container and start a fire. [9]
  4. Keep the can away from combustible materials. [10]
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      • Plan ahead by letting the fire die down a couple hours before you plan on leaving. Put out the fire early so you have time to make sure it's completely out before you leave it unattended.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Don't attempt to put out a fire in a fireplace by smothering it with an object. If the object is flammable, it could catch on fire and create a dangerous amount of smoke.
      • Don't wait for a fire in a fireplace to go out on its own. Hot embers in a fireplace can burn for several days and could cause another fire to start if they're left untended to.
      • Never attempt to put out a fire by fanning it with an object or your hands. Fanning a fire will make it grow.
      • If your fireplace fire gets too large or extends into your chimney and you're unable to put it out, call the fire department immediately.
      Advertisement

      Things You'll Need

      • Plastic spray bottle
      • Water
      • Baking soda
      • Metal shovel
      • Metal can
      • Heat resistant gloves

      About This Article

      Article Summary X

      It’s important to fully put out a fire in your fireplace so it doesn’t reignite after you’ve left the room. To put a fire out, first, spread the firewood and embers with a fire poker so they cool more quickly. Then, spray the fire thoroughly with a spray bottle filled with water, which will produce less steam than pouring a bucket of water on the fire. Alternatively, you can pour baking soda over the embers and firewood. Baking soda contains sodium bicarbonate, which is an ingredient found in some fire extinguishers. Before you leave the room, make sure there are no flames or red embers left, which could start a fire. To learn how to remove ashes from your fireplace, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 205,172 times.

      Reader Success Stories

      • Anonymous

        Dec 25, 2017

        "Adding baking soda and water together worked really well."
      Share your story

      Did this article help you?

      Advertisement