Download Article
Download Article
A trellis is a useful structure for a yard or garden. It gives climbing plants and flowers a place to grow and prevents them from damaging the siding of your house. A trellis can also lend visual interest to a landscape when plants lie dormant. Follow these steps to put up a trellis.
Steps
-
Set the trellis 1 to 2 feet (30 to 60 cm) away from your house. This distance will give you space to access the back of the trellis for pruning and maintenance and allow air to flow freely to the trellis' plants. [1] X Research source
-
Measure how far apart the centers of a trellis' uprights are from each other. Mark their places on the ground.Advertisement
-
Dig holes for a wood trellis' posts with a posthole digger. Make sure the holes go deep enough to clear the ground's frost line. [2] X Research source
-
Fill the post holes with 6 inches (15 cm) of 3/4-inch (1.9 cm) gravel. The gravel will act as drainage. Tamp the gravel in the holes. [3] X Research source
-
Lay your trellis face down on the ground. The foot of its uprights should be next to your dug postholes.
-
Lift and tilt the trellis into place. Have at least 1 other person help you with this.
-
Place a level on the trellis' bottom edge. Check that it is even and add more gravel to make the trellis level as necessary.
-
Check that the trellis is plumb.
-
Stabilize the trellis in its position. Place 2-inch deep by 4-inch wide (5 by 10 cm) boards on the sides of the trellis. Drill holes and screw the boards for the trellis into place. [4] X Research source
-
Fill remaining space in the post holes. Use a mixture of soil and gravel. Tamp down the dirt and gravel for every 6 inches (15 cm) that you fill.
-
Top off the last few inches (cm) of space in the holes by shoveling dug up soil into them.
-
Remove the 2 by 4 inch (5 by 10 cm) boards holding the trellis in place. [5] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Leave 12 inches (30 cm) of clearance space between the trellis' bottom frame and the ground.Thanks
- Use 2 by 4s (5 by 10 cm) made of cedar or pressure-treated wood, depending on the type of your wood trellis.Thanks
- Mark the posthole digger's handles with tape at the depth for your trellis' holes. You will not then need to stop and measure the depth of each hole while digging it.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- These instructions for installing your trellis are for wooden trellises. Your trellis may be made of a different material and require different instructions.Thanks
Advertisement
Things You'll Need
- Trellis
- Measuring tape
- Tape for posthole digger's handles
- Posthole digger
- 50 lb. (22 kg) bags of 3/4-inch (1.9 cm) gravel
- Small hand tamper
- 1 or more human helpers
- 2-foot (60 cm) level
- Electric drill/screwdriver
- 2 by 4 (5 by 10 cm) boards
- Screws
- Shovel
References
About This Article
Thanks to all authors for creating a page that has been read 90,028 times.
Reader Success Stories
- "This article showed how to fit the posts - easy. How do you fit the trellis between the posts without brackets?"
Advertisement