Download Article
Download Article
It’s game day! You’ve got your face paint on and your foam finger ready—but what about those peeling letters on your jersey? If your favorite jersey is looking a little worse for wear, don’t worry. In this article, we’ll tell you exactly how to reattach plastic lettering using either an iron or fabric glue to get you ready to support your favorite team.
Steps
-
1Lay the jersey on an ironing board. Spread your jersey flat on an ironing board with the plastic lettering facing upward. Smooth out the fabric as much as you can before you get started. [1] X Research source- Smooth out the lettering as much as you can, too. If there are any corners peeling up, press them down flat onto the jersey material.
- The ironing method works well for plastic and vinyl lettering.
-
2Set your iron to medium heat with the steam turned off. To reattach your letters, you only need heat, not steam. Let your iron sit for a couple of minutes to let it heat up. [2] X Research source- Different irons have different heat settings, but most use numbers to indicate how hot they’ll get. If your iron uses numbers, set it to level 3.
Advertisement -
3Place a plain sheet of paper over the lettering. Paper will protect the lettering on your jersey from getting too hot. Grab a plain white sheet of paper and place it on top of the letters that you want to reattach. [3] X Research source
- Be sure to use plain white paper, not lined paper. Lined paper may leave ink residue on your jersey.
- If you don’t have paper, you can also use a thin cotton towel.
-
4Iron the lettering to smooth down any edges. Grab your iron and place it gently on top of the lettering on your jersey. Run the iron quickly back and forth, without staying in one place for more than a few seconds. Go over all your lettering, and pay special attention to any areas that are peeling up. [4] X Research source- Keep the iron flat on top of the paper to avoid any creasing.
-
5Peel the paper up while the lettering is still hot. Once you’ve ironed over all your lettering, quickly grab the paper and remove it from your jersey (otherwise, it could stick to the lettering). Enjoy your jersey that looks brand new again! [5] X Research source
Advertisement
-
1Spread the jersey out on a flat surface. If your jersey is dirty, wash it before you start. Spread the jersey out on a flat surface with the lettering facing upward, and smooth out any wrinkles or lumps.
-
2Dab a small dot of fabric glue under the edge of the letter. Gently grab the edge of the lettering and peel the corner upward. Grab your fabric glue and put a small dot directly onto the jersey where you want the lettering to lay flat.
-
3Press the letter down into place. Push the lettering down onto the glue that you put on your jersey. Hold it in place for a couple of seconds to adhere the lettering to the glue. If any glue squeezes out of the sides, wipe it up before it dries.
-
4Iron the lettering with a thick towel over it. Ironing your jersey will help the glue set and also keep the letters laying flat as they dry. Spread your jersey out on an ironing board, then put a thick towel over the lettering. Set your iron to the hottest setting and iron the letters for about 30 seconds.
-
5Let the fabric glue dry before wearing your jersey again. For the best results, keep your jersey laying flat for about 24 hours before you put it on again. That way, your glue will adhere to your jersey fabric, and your lettering will stay in place for much longer.
- Need to wash your jersey? No problem! Fabric glue can be washed and dried without peeling off. Simply wash your jersey like you normally would once it’s dirty.
Advertisement
Community Q&A
Search
-
QuestionHow can I iron the letters of a hockey jersey?Community AnswerTry putting a thin layer of cloth over top of the jersey, like a cotton t-shirt, and iron the letters over the cloth. Keep the iron on a lower setting.
-
QuestionIf I use notebook paper on my jersey, do I have to use two sheets or one?T. ChinsenTop AnswererTest it first with 2 sheets to see if it will adhere the letter back on. Repeat with a single sheet. Adding a layer of foil under the fabric can provide an even heat level across the fabric surface.
-
QuestionWould wax or parchment paper work better than white paper?Community AnswerParchment paper would not be thick enough, and the wax on wax paper would melt.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- The heat from a dryer tends to damage the lettering on jerseys. From now on, try air-drying your jersey every time you wash it to keep it in pristine condition.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
References
About This Article
Thanks to all authors for creating a page that has been read 293,368 times.
Reader Success Stories
- "We used parchment paper instead of regular paper and it worked like a charm! Thanks so much!"
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"We used parchment paper instead of regular paper and it worked like a charm! Thanks so much!"
