Download Article
Download Article
Ouch! Removing a band-aid can hurt. Each person experiences pain differently and there is no one-size-fits-all approach. How much hair is in the area, type of band-aid, how long it’s been on your skin, and how healed your wound is can all affect how it feels to pull it off. All of these methods can be achieved with common household items and a little bit of patience.
Steps
-
Wash your hands with soap and clean water. You should have clean hands whenever you are touching the area around your band-aid to prevent the spread of bacteria and possible infection. [1] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
- Use clean water from a tap to wet your hands. Warm or cold is fine.
- Turn off the tap and apply soap to your hands.
- Rub your hands together to create a lather with the soap making sure to coat the back of your hands, between your fingers, and underneath your fingernails.
- Continue scrubbing your hands for 20 seconds. This is about as long as it takes to sing the “Happy Birthday” song twice in a row from beginning to end.
- Rinse the soap off of your hands with clean water from the tap.
- Dry your hands with a clean cloth towel, paper towel, or you can air dry them.
- As an alternative to washing your hands, you can use a hand sanitizer that is at least 60% alcohol.
-
Clean the area around the band-aid. Like washing your hands, cleaning the area around your band-aid can help prevent infection or the spread of bacteria during removal.
- Fill a clean bowl with clean tap water and mild liquid soap. Warm or cold water is fine, although warm (not hot) water may feel more comforting.
- Soak a clean washcloth in the soapy water and wring it out to remove excess moisture.
- Gently wash the skin around and on top of the band-aid with the washcloth. Avoid putting direct pressure on top of the band-aid as you do this. Instead, give it a quick wipe with the cloth.
- Gently pat the area dry with a clean, dry washcloth.
Advertisement -
Work at one corner of the bandage little by little. It’s important to move slowly here and are not too ambitious about how much you peel up. The less you peel, the less it will hurt. [2] X Research source
- If the band-aid is in a hairy part of your body, ripping it off slowly may be more comfortable.
- It can help to get a fingernail up under the edge of the band-aid to tease the adhesive away from the skin.
-
Lift it a little, tug at it a little more, then rest and repeat until the bandage comes off completely. This part can feel like it’s taking forever, but in order to reduce discomfort, you need to work slowly.
- Take breaks for as long as you need to in between tugs. This gives your pain reflex a chance to calm down.
- This process takes extra patience, but you are getting there, slowly but surely.
- How many times you repeat these steps depends on how big the band-aid is, and how much you are able to peel back each time.
- Take your time, breathe, and stay relaxed as you work the band-aid off.
- Remember, if you get bored, though, you can always switch to the quick rip method.
Advertisement
-
Wash your hands with soap and clean water. You should have clean hands whenever you are touching the area around your band-aid to prevent the spread of bacteria and possible infection.
- Use clean water from a tap to wet your hands. Warm or cold is fine.
- Turn off the tap and apply soap to your hands.
- Rub your hands together to create a lather with the soap making sure to coat the back of your hands, between your fingers, and underneath your fingernails.
- Continue scrubbing your hands for 20 seconds. This is about as long as it takes to sing the “Happy Birthday” song twice in a row from beginning to end.
- Rinse the soap off of your hands with clean water from the tap.
- Dry your hands with a clean cloth towel, paper towel, or you can air dry them.
- As an alternative to washing your hands, you can use a hand sanitizer that is at least 60% alcohol.
-
Clean the area around the band-aid. Like washing your hands, cleaning the area around your band-aid can help prevent infection or the spread of bacteria during removal.
- Fill a clean bowl with clean tap water and mild liquid soap. Warm or cold water is fine, although warm (not hot) water may feel more comforting.
- Soak a clean washcloth in the soapy water and wring it out to remove excess moisture.
- Gently wash the skin around and on top of the band-aid with the washcloth. Avoid putting direct pressure on top of the band-aid as you do this. Instead, give it a quick wipe with the cloth.
- Gently pat the area dry with a clean, dry washcloth.
-
Grasp an edge of the band-aid and grip it firmly between your pointer finger and thumb. You’ll need a firm grip to keep consistent tension and angle for this method.
- This method may work especially well for waterproof band-aids.
-
Pull on the band-aid gently keeping it parallel to your skin. Pulling parallel to your skin encourages the adhesive to release rather than stick to your skin. [3] X Research source
- It is normal for the band-aid to stretch slightly with this method.
- This can be an awkward movement, but when you get the hang of it, you’ll feel the adhesive release from your skin.
-
Keep tension on the band-aid as you pull it all the way off. Consistent tension keeps the band-aid from sagging and re-sticking to your skin.
- For the final bit, you may have to pull up more vigorously and finish with a quick jerk up and away from your skin.
- It will help if you have “follow-through” with your movement so you don’t get stuck at the very end.
- Keep this movement as steady and smooth as you can so you don’t prolong any discomfort.
- Alternatively, you can peel the band-aid off diagonally across the wound. Some people find they are better at controlling the band-aid with this method.
- The tingling feeling you have on your skin where the band-aid was should subside shortly.
Advertisement
-
Wash your hands with soap and clean water. You should have clean hands whenever you are touching the area around your band-aid to prevent the spread of bacteria and possible infection. [4] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
- Use clean water from a tap to wet your hands. Warm or cold is fine.
- Turn off the tap and apply soap to your hands.
- Rub your hands together to create a lather with the soap making sure to coat the back of your hands, between your fingers, and underneath your fingernails.
- Continue scrubbing your hands for 20 seconds. This is about as long as it takes to sing the “Happy Birthday” song twice in a row from beginning to end.
- Rinse the soap off of your hands with clean water from the tap.
- Dry your hands with a clean cloth towel, paper towel, or you can air dry them.
- As an alternative to washing your hands, you can use a hand sanitizer that is at least 60% alcohol.
-
Clean the area around the band-aid. Like washing your hands, cleaning the area around your band-aid can help prevent infection or the spread of bacteria during removal.
- Fill a clean bowl with clean tap water and mild liquid soap. Warm or cold water is fine, although warm (not hot) water may feel more comforting.
- Soak a clean washcloth in the soapy water and wring it out to remove excess moisture.
- Gently wash the skin around and on top of the band-aid with the washcloth. Avoid putting direct pressure on top of the band-aid as you do this. Instead, give it a quick wipe with the cloth.
- Gently pat the area dry with a clean, dry washcloth.
-
Soak a cotton ball in olive oil to saturate it. This is the most efficient way to get the most oil onto the adhesive part of the band-aid.
- This will take 1-2 minutes depending on how big your cotton ball is.
- Be sure to protect your clothing and other items around you from accidental drips.
- Alternatively, you can also use baby oil instead of olive oil.
- Another option is to use a mixture of lotion and baby oil applied with a cotton swab to achieve similar results
- If you don’t have either of these oils on hand, you can also soak the band-aid and surrounding area in a bowl of clean, warm water until the adhesive dissolves. This option may work better for fabric types of band-aids.
-
Rub the cotton all over the top of the adhesive parts of the band-aid and let it soak in. The oil will help to dissolve the part of the band-aid that sticks to your skin so it can slip off with minimal effort. [5] X Research source
- How long this takes depends on the size, location, and strength of the adhesive on the band-aid.
- Keep the oil from getting on the cotton underside of the band-aid so it doesn’t irritate your wound.
-
Peel the band-aid off slowly. This should require little effort and no pain. If it's still sticking, try leaving the oil on for a little longer.
Advertisement
-
Wash your hands with soap and clean water. You should have clean hands whenever you are touching the area around your band-aid to prevent the spread of bacteria and possible infection. [6] X Research source
- Use clean water from a tap to wet your hands. Warm or cold is fine.
- Turn off the tap and apply soap to your hands.
- Rub your hands together to create a lather with the soap making sure to coat the back of your hands, between your fingers, and underneath your fingernails.
- Continue scrubbing your hands for 20 seconds. This is about as long as it takes to sing the “Happy Birthday” song twice in a row from beginning to end.
- Rinse the soap off of your hands with clean water from the tap.
- Dry your hands with a clean cloth towel, paper towel, or you can air dry them.
- As an alternative to washing your hands, you can use a hand sanitizer that is at least 60% alcohol.
-
Clean the area around the band-aid. Like washing your hands, cleaning the area around your band-aid can help prevent infection or the spread of bacteria during removal.
- Fill a clean bowl with clean tap water and mild liquid soap. Warm or cold water is fine, although warm (not hot) water may feel more comforting.
- Soak a clean washcloth in the soapy water and wring it out to remove excess moisture.
- Gently wash the skin around and on top of the band-aid with the washcloth. Avoid putting direct pressure on top of the band-aid as you do this. Instead, give it a quick wipe with the cloth.
- Gently pat the area dry with a clean, dry washcloth.
-
Set your blow dryer to the lowest setting. Warm air softens the sticky part of the band-aid and makes it easier to remove.
- Using the warm setting will lower the risk of you burning yourself.
-
Blow warm air in a back and forth motion onto the band-aid. This helps you achieve an even release of the adhesive and minimizes discomfort from the heat on your skin. [7] X Research source
-
Test to see if the band-aid is ready to peel off. How long this process takes depends on the size and strength of the adhesive area.
- It’s easiest to slide a fingernail underneath an edge and gently pry it up.
- If it's not ready to peel off, apply more warm heat with the blow-dryer.
- Areas with more hair may take less time than band-aids stuck to smooth skin.
-
Repeat these steps until the band-aid is loose enough to come off easily. You should feel minimal resistance from the band-aid. If it’s not ready yet, be patient and keep working at it with the heat.
Advertisement
-
Wash your hands with soap and clean water. You should have clean hands whenever you are touching the area around your band-aid to prevent the spread of bacteria and possible infection.
- Use clean water from a tap to wet your hands. Warm or cold is fine.
- Turn off the tap and apply soap to your hands.
- Rub your hands together to create a lather with the soap making sure to coat the back of your hands, between your fingers, and underneath your fingernails.
- Continue scrubbing your hands for 20 seconds. This is about as long as it takes to sing the “Happy Birthday” song twice in a row from beginning to end.
- Rinse the soap off of your hands with clean water from the tap.
- Dry your hands with a clean cloth towel, paper towel, or you can air dry them.
- As an alternative to washing your hands, you can use a hand sanitizer that is at least 60% alcohol.
-
Clean the area around the band-aid. Like washing your hands, cleaning the area around your band-aid can help prevent infection or the spread of bacteria during removal.
- Fill a clean bowl with clean tap water and mild liquid soap. Warm or cold water is fine, although warm (not hot) water may feel more comforting.
- Soak a clean washcloth in the soapy water and wring it out to remove excess moisture.
- Gently wash the skin around and on top of the band-aid with the washcloth. Avoid putting direct pressure on top of the band-aid as you do this. Instead, give it a quick wipe with the cloth.
- Gently pat the area dry with a clean, dry washcloth.
-
Make an ice pack by wrapping several ice cubes in a paper towel or thin cloth. Choose something not too thick that it blocks the cold of the ice.
- Don’t use a gel pack because it won’t get the adhesive cold enough.
-
Hold the ice pack against the parts of the band-aid with adhesive. Ice can make the adhesive brittle so it pulls off your skin easily.
- The time it takes here depends on how strong the adhesive is, and the overall size of your band-aid.
-
Test to see if the band-aid is released by lifting a corner. If the band-aid doesn’t release easily, continue icing it. Repeat this until the band-aid is able to come off entirely.
- It’s easiest to slide a fingernail underneath an edge and gently prying it up.
Advertisement
-
Wash your hands with soap and clean water. You should have clean hands whenever you are touching the area around your band-aid to prevent the spread of bacteria and possible infection.
- Use clean water from a tap to wet your hands. Warm or cold is fine.
- Turn off the tap and apply soap to your hands.
- Rub your hands together to create a lather with the soap making sure to coat the back of your hands, between your fingers, and underneath your fingernails.
- Continue scrubbing your hands for 20 seconds. This is about as long as it takes to sing the “Happy Birthday” song twice in a row from beginning to end.
- Rinse the soap off of your hands with clean water from the tap.
- Dry your hands with a clean cloth towel, paper towel, or you can air dry them.
- As an alternative to washing your hands, you can use a hand sanitizer that is at least 60% alcohol.
-
Clean the area around the band-aid. Like washing your hands, cleaning the area around your band-aid can help prevent infection or the spread of bacteria during removal.
- Fill a clean bowl with clean tap water and mild liquid soap. Warm or cold water is fine, although warm (not hot) water may feel more comforting.
- Soak a clean washcloth in the soapy water and wring it out to remove excess moisture.
- Gently wash the skin around and on top of the band-aid with the washcloth. Avoid putting direct pressure on top of the band-aid as you do this. Instead, give it a quick wipe with the cloth.
- Gently pat the area dry with a clean, dry washcloth.
-
Peel back one end of the bandage to create a tab. Making this tab will help you keep control over the band-aid as you pull it off.
-
Close your eyes, take a deep breath and hold it in for a count of three. Paying attention to your breath will signal your body to let go of stress and helps you get ready to pull off the band-aid. [8] X Research source
-
Exhale on three and pull the bandage off as fast as you can. Contrary to what many think, ripping the band-aid off quickly can be less painful for some. However, it could damage your skin, so use caution if you choose to rip off the bandage. [9] X Research source
- Exhaling while you pull the band-aid off can trigger your body to relax rather than tense up. Likewise, the faster you pull, the faster your discomfort will be over.
- If the skin is really irritated, apply a chunk of ice or a cold compress to the area to help soothe the skin.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Warnings
- Be extra careful if the adhesive is touching your wound. You don't want to re-open it or cause yourself more injury.Thanks
- For any of the heat methods, make sure to use warm temperatures rather than hot.Thanks
- When using oils and lotions, be sure to protect your clothing and any furniture you are near.Thanks
Advertisement
References
- ↑ http://www.cdc.gov/handwashing/when-how-handwashing.html
- ↑ https://www.mja.com.au/journal/2009/191/11/fast-versus-slow-bandaid-removal-randomised-trial
- ↑ https://www.independentnurse.co.uk/clinical-article/managing-pain-during-the-removal-of-wound-dressings/63599/
- ↑ http://www.cdc.gov/handwashing/when-how-handwashing.html
- ↑ https://www.myamericannurse.com/adhesive-removal/
- ↑ https://kidshealth.org/en/parents/hand-washing.html
- ↑ https://www.latimes.com/archives/la-xpm-1997-nov-09-re-51847-story.html
- ↑ https://news.umich.edu/mindful-breathing-for-pain-control-like-yin-and-yang/
- ↑ https://www.mja.com.au/journal/2009/191/11/fast-versus-slow-bandaid-removal-randomised-trial#4
About This Article
Thanks to all authors for creating a page that has been read 345,496 times.
Reader Success Stories
- "Applying water to the Band Aid helped, but I think it's infected because it's gooey."
Advertisement
"Applying water to the Band Aid helped, but I think it's infected because it's gooey."
"Everything was super helpful, especially the olive oil."
"Yes. The olive oil really helped. Thank you."
"Useful article and good variety of options."
"I like that it is supportive. Thanks!"
