How to Repair Corrupted BIOS Firmware

PDF download Download Article
PDF download Download Article

A BIOS corruption can result in your computer malfunctioning or failing to boot. Fortunately, if your BIOS firmware has become corrupted, there are a few troubleshooting steps you can take to try to repair the corrupted BIOS. If your motherboard has a backup BIOS, you can boot into the backup BIOS and reflash the corrupted BIOS. If your motherboard does not have backup BIOS, you may be able to replace the BIOS chip. However, in some cases, the only option may be to replace the motherboard entirely. This wikiHow teaches you how to repair a corrupted BIOS.

Steps

PDF download Download Article
  1. Before attempting to make any repairs yourself, check to see if your computer is under warranty. In many cases, simply opening your computer will void your warranty. If your computer is still under warranty, then it is recommended that you contact the point of sale or manufacturer and have them repair your computer for you.
    • If you built the computer yourself you'll want to see if your motherboard is still under warranty.
  2. Some Gigabyte motherboards come with a backup BIOS installed on the motherboard. If the main BIOS is corrupted, you can boot from the backup BIOS, which will automatically reprogram the main BIOS if there is anything wrong with it. If it does not boot into the backup BIOS automatically, you can use one of the following steps to force it to boot from the backup BIOS: [1]
    • Method 1: Power your computer off. Then press and hold the power button until your computer powers back on. Continue to hold the power button until the computer powers off again. When you power it back on, it should boot from the backup BIOS.
    • Method 2: Power your computer off. Press and hold the Power button and the Reset button for about 10 seconds and release. When you power your computer on a third time, it should boot from the backup BIOS.
    • Method 3: Use this method as a last resort. If you are unable to get your Gigabyte motherboard to boot into the backup BIOS using either of the two methods above, you'll need to open your computer and access the motherboard directly. Look for a chip labeled "m-BIOS" or "Main BIOS" or something similar. Use a wire or a paperclip to short Pins 1 and 6 on the chip. There should be a triangle icon or a red dot next to Pin 1 (it's usually the one on the bottom right). Pins 1, 2, 3, and 4 are all on the same side. Pin 5 is directly across from Pin 4 and Pin 6 is right next to Pin 5. Place a paperclip or short piece of wire on Pins 1 and 6 and hold it steady (be sure to touch something metal before touching the inside of a motherboard.) Have another person power the computer on. Remove the paperclip or wire when you hear it beep. This should force your computer to boot into the backup BIOS.
    Advertisement
  3. Some users have reported that problems with the BIOS can be fixed by removing the dedicated (discrete) graphics card and forcing your PC to utilize the integrated graphics card. [2]
    • Note: Not all CPUs come with an integrated graphics cards. These include Intel CPUs with an F product line suffix. For more information, check your manufacturer's product webpage.
    • Warning: Conducting repairs on your PC requires that your PC is powered off all the time. Be sure to keep your hand on something metal outside your computer or wear static wristbands to keep yourself electrically earthed. This prevents static discharge that can cause permanent damage to your computer.
  4. Reset the BIOS . In some cases, you may be able to fix problems with a corrupted BIOS by resetting the BIOS. You can do this one of three ways: [3]
    • Boot into the BIOS and reset it to the factory settings. If you are able to boot into the BIOS, go ahead and do so. Locate the option to "Load Setup Defaults", "Restore Factory Settings", or something similar. Select this option to reset the BIOS.
    • Remove the CMOS battery from the motherboard. Unplug your computer and open your computer's case to access the motherboard. It's the large board that has all the cables, chips, and computer cards attached to it. Locate the CMOS battery. Generally, it is a type CR2032 battery that is about the size of a quarter. Carefully remove the battery and let it sit for 20 minutes. If your computer is a laptop, remove the laptop battery as well. If this doesn't fix the issue, try replacing the battery with a new one.
    • Reset the jumper. This is typically done on older motherboards. Unplug your computer and open your computer's case to access the motherboard. Locate a jumper cable that says "CMOS" or something similar next to it. The jumper will be placed on two out of three pins. Remove the jumper and replace it one set of pins over. Press and hold the Power button on the computer for about 15 seconds. Replace the jumper back to it original position.
  5. Update your BIOS . In some cases, you may be able to fix problems with a corrupt BIOS by updating the BIOS. Make sure your computer has a consistent power source when you updating your BIOS. If the update process is interrupted, it can cause permanent damage to your computer. You will need to know which version of BIOS you are running. Use the following steps to update your BIOS: [4]
    • Find out which version of BIOS you are running. If you are able to boot into your BIOS, it will tell you what version of BIOS it is running. If you can boot into Windows, click the Windows Start menu and type "System Information" and open the System Information app. Check what version of BIOS you are running next to "BIOS Version/Date." If you cannot boot into the BIOS or Windows, you most likely will not be able to update your BIOS.
    • Consult your computer manufacturer's website. You can do this from a separate computer if need be.
    • Download an updated BIOS file and copy it to a flash drive.
    • Follow the manufacturer's instructions to update your BIOS. [5] The process will be a little different from one computer manufacturer to another. In most cases, you will need to copy the BIOS update file to a flash drive or create a bootable flash drive. You will either boot from the bootable flash drive or boot into the BIOS and select the option to update the BIOS from a flash drive.
    • If you have an HP computer, you may be able to update the BIOS shutting down your computer and then pressing Windows key + B + Power and hold them for about 3 seconds. Release the Power button, but continue to hold the Windows key and B buttons until the BIOS update screen appears. Your computer screen may go blank and you may hear more beeping sounds coming from your computer.
  6. This is only an option if your motherboard has a slotted DIP or PLCC BIOS chip. If the BIOS chip is soldered to the motherboard, your only option will be to replace the motherboard. If you are able to replace the BIOS chip, use the following steps to replace it: [6] [7]
    • Take note of the make and model of your motherboard.
    • Purchase a replacement BIOS chip for the motherboard model that you have. You can purchase BIOS chips online from eBay, or a specialty website like, Newegg , or BIOS-Chip24. Some places may require that you send them your old BIOS chip to be reprogrammed.
    • Locate the BIOS chip on the motherboard and note which end the notch is facing.
    • Carefully remove the old BIOS chip using an extraction tool or by carefully prying it loose using a small pick or jewelers flathead screwdriver.
    • Insert the new BIOS chip so the notch faces the same direction as the notch on the old BIOS chip. If the prongs are too wide, you can carefully bend them inward by press pushing them against a solid flat surface.
  7. If you cannot replace the BIOS chip, and you can't reprogram it or fix the problem by resetting it, then the only option is to replace the motherboard. You can purchase a new motherboard from Amazon, eBay, or any computer specialty store such as Newegg.com .
    8. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    Is it safe to upgrade the BIOS?
    Mobile Kangaroo
    Computer & Phone Repair Specialists
    Mobile Kangaroo is a full service repair shop and Apple Authorized Service Provider headquartered in Mountain View, CA. Mobile Kangaroo has been repairing electronic devices such as computers, phones, and tablets, for over 19 years, with locations in over 20 cities.
    Mobile Kangaroo
    Computer & Phone Repair Specialists
    Expert Answer
    It is generally safe to do this so long as you pull the update directly from whoever manufactured your device and you follow their instructions carefully.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 5
  • Question
    I am unable to save settings in the BIOS. I have tried changing my CMOS battery, but it didn't work. What should I do?
    Community Answer
    You don't need to change the battery; just reset it before changing any settings. If you change the battery afterwards, it won't do anything.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 12
  • Question
    I have a Gigabyte B75M-D3H board with i3-3220 processor, 2Gb+4Gb DDR3 RAM 1600Mhz, 1TB Seagate HDD. I've been using this machine for the last 3 years without any problems, and suddenly 2 days ago when I started the machine it went to BIOS recovery screen. After recovery completed the machine didn't start. What do I do?
    Community Answer
    Remove your CMOS battery and boot your computer, then once you have booted into your OS (windows Linux, whatever it is), shut it down and put your CMOS battery back in.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 18
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Have an anti-static bag or plastic container to keep the bios chips in when they are set aside so they are not damaged.
        Thanks
        Helpful 3 Not Helpful 2
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • This will probably void your warranty, and if you do this wrong, you may have two non-working motherboards.
        Thanks
        Helpful 4 Not Helpful 1
      Advertisement

      You Might Also Like

      Easy Guide to Updating the BIOS on a Computer (Windows)
      How to
      Reset a BIOS Password
      3 Ways to Reset a Computer’s BIOS: Software & Hardware Methods
      How to
      Check Browsing History on a WiFi Router
      How to
      Remove Write Protection from a USB Pen Drive
      3 Easy Ways to Find the Publication Date of a Website
      How to
      Connect PC to TV with HDMI
      How to
      Add the Google Play Store to an Amazon Fire Tablet
      Easy Ways to Read Crash Dump Files & Troubleshoot Crashes
      How to
      Bypass Your Screen Time Passcode: Reset, Remove, or Hack Screen Time
      6 Ways to Pair Your JBL Earbuds: Guide & Troubleshooting Tips
      How to
      Turn on Backlit Keyboard on Lenovo
      10 Genius Ways to Cheat a Step Counter on a Phone (No Walking Required)
      How to
      Format a Write–Protected Pen Drive
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about fixing computer issues, check out our in-depth interview with Mobile Kangaroo .

      References

      1. ↑ https://download.gigabyte.com/FileList/Manual/mb_manual_z690-features_n.pdf
      2. ↑ https://windowsreport.com/bios-corruption-windows-10
      3. ↑ https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html
      4. ↑ https://www.intel.com/content/www/us/en/gaming/resources/how-to-update-bios.html
      5. ↑ Mobile Kangaroo. Computer & Phone Repair Specialists. Expert Interview. 11 September 2019.
      6. ↑ https://www.youtube.com/watch?v=V67YRlsBEoY&t=70s
      7. ↑ https://www.pctechguide.com/how-to-update-your-system-bios/replacing-your-bios-chip-how-to-update-your-system-bios

      About This Article

      Article Summary X

      1. Check if your computer is under warranty.
      2. Try removing the dedicated graphics card. 3. Reset the BIOS either within the BIOS or by removing the CMOS battery on the motherboard.
      4. Try to reflash the BIOS either by using a bootable flash drive or by taking it to a computer repair specialist.
      5. Check if the BIOS chip can be replaced.
      6. Purchase a new BIOS chip and replace it if possible.
      7. Replace the motehrboard if BIOS chip cannot be replaced.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 562,083 times.

      Is this article up to date?

      Advertisement