Download Article
Download Article
European pillows are the big bold statement pieces of a well-made bed. Unlike standard pillow sizes, which are rectangular, European pillows are large squares that usually measure 26 in × 26 in (66 cm × 66 cm) or 28 in × 28 in (71 cm × 71 cm). This means that they're even easier to sew since your measurements are simpler. If you're a beginner sewer, European pillowcases are a great project since your pattern is easy to cut and you're just sewing straight lines.
Steps
-
Select fabric for your pillowcases. You can use any type of fabric you like to create your custom European pillowcases. If you'd like soft, lightweight pillowcases so you can leave the pillows on the bed while you sleep, choose cotton, linen, or a cotton-synthetic blend. For purely decorative pillowcases, you may want a heavier fabric like tweed, brushed denim, or drapery fabric. [1] X Research source- Buy around 1 yard (0.91 m) of fabric for each pillowcase you're making.
-
Cut the fabric into 1 square that matches the size of your pillow. Most standard European pillows are 26 in × 26 in (66 cm × 66 cm) or 28 in × 28 in (71 cm × 71 cm), but you could make a pillowcase for any square-sized pillow. Measure across your pillow to find the measurement. Then, lay your fabric flat and cut a square with the same measurement. [2] X Research source
- For example, if you want to make a pillowcase for an 16 inches (41 cm) European pillow, cut the fabric to a 16 in × 16 in (410 mm × 410 mm) square.
Advertisement -
Make 2 rectangular pieces of fabric for the back of the pillowcase. To find the measurements for the back flaps, divide the size of your pillowcase by 2 and add 2 inches (5.1 cm). Then, cut a rectangle that's this length by the length of your pillow. [3] X Research source
- For example, if your pillow is 16 inches (41 cm), divide that by 2 to get 8 inches (20 cm) and add 2 inches (5.1 cm) to get a length of 10 inches (25 cm). Your rectangles should be 16 by 16 inches (41 cm × 41 cm).
-
Fold 1 long side of the rectangles over by 1 ⁄ 2 inch (1.3 cm) and iron it. Lay the rectangles so the wrong side faces up and tuck 1 of the long ends over towards the center. Fold it by 1 ⁄ 2 inch (1.3 cm) and iron across it to crease the fabric. Then, do this for the other rectangle. [4] X Research source
- Don't fold and iron all of the long sides; just 1 on each rectangle since they'll overlap.
-
Sew straight stitches across the folded sides of the rectangles. Take your fabric to the sewing machine and make a few stitches. Backstitch a few times before you make straight stitches down the folded length of the rectangle. Repeat this for the other rectangle. [5] X Research source
- Folding and sewing the edges that will overlap prevents them from fraying.
- Use a thread color that matches your pillowcase fabric.
Advertisement
-
Stack the rectangles on the square so they overlap. Place the square of fabric so the pattern faces up. Then, arrange 1 of the rectangles pattern-side down on the square so the long sides line up. Put the other rectangle piece pattern-side down on the other side of the square so it overlaps. [6] X Research source
- Remember to put the folded and sewn edge in the center of the pillowcase.
-
Pin around the outer seams of the pillowcase. Insert sewing pins so they're parallel to the sides of the square and put a pin every 2 inches (5.1 cm) or so. Don't pin across the folds in the center of the pillow since you won't be sewing these closed. [7] X Research source
- If you don't want to use sewing pins, use sewing clips instead. These won't leave holes and you won't accidentally poke yourself.
-
Sew each side of the pillowcase using a straight stitch. Start sewing at 1 corner of the pillow and sew a straight stitch along the side. Leave a 1 ⁄ 4 inch (0.64 cm) seam allowance as you go. When you reach a corner, stop sewing and lift your presser foot. Turn your fabric 90-degrees while the sewing needle is still in the fabric. Then, put the foot down and continue to sew. [8] X Research source
-
Turn the pillowcase right side out and stuff the Euro pillow into it. Reach in between the overlapped fabric and pull the pillowcase so the pattern faces out. Take a knitting needle and push it into each corner to push the edge out. Then, open the back flaps of the pillowcase and insert the Euro pillow. [9] X Research source
- It's easy to wash the pillowcase. Just remove the pillow and wash the pillowcase according to the fabric's care instructions.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Avoid using fusible bonding to make no-sew pillowcases. After a few washes, the fusible bonding disintegrates and your pillowcases will come apart.Thanks
- If you'd like to be able to close the back of the pillowcase, stitch a row of buttons on 1 side. Then, make buttonholes on the opposite side. You can also stitch hook-and-loop fastener on either side of the opening.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Fabric
- Measuring tape or ruler
- Sewing machine
- European pillow
- Scissors
References
- ↑ https://sewguide.com/fabric-glossary/
- ↑ https://www.u-createcrafts.com/european-pillow-sham-tutorial/
- ↑ https://youtu.be/6-QV3kA8WIM?t=307
- ↑ https://youtu.be/6-QV3kA8WIM?t=327
- ↑ https://youtu.be/6-QV3kA8WIM?t=345
- ↑ https://youtu.be/6-QV3kA8WIM?t=373
- ↑ https://www.u-createcrafts.com/european-pillow-sham-tutorial/
- ↑ https://youtu.be/6-QV3kA8WIM?t=386
- ↑ https://youtu.be/6-QV3kA8WIM?t=393
About This Article
Thanks to all authors for creating a page that has been read 29,816 times.
Advertisement
86%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
