Download Article Download Article

Shortening pants is necessary, but it can be time-consuming. This sounds complicated, but it is easy. Once you have done it once, you will find it quick, easy, and inexpensive.

  1. If the pants have an unfinished bottom, you are on your way. If not, turn the pants inside out, undo the hem at the bottoms and smooth out the creases with a steam iron.
  2. Take a pair of pants that you have, that are the correct length and measure the outside leg, including the waistband.
    Advertisement
  3. Make a chalk mark across the pants and transfer the mark all round the bottom. You now have a chalk mark that is the correct length all round the bottom.
  4. If the fabric is prone to fraying, rolling, or unraveling, you might want to machine-stitch a row of zigzag stitching around the very end. Cutting a woven fabric with pinking shears can also help to prevent fraying.
  5. 5
    Take the wonderweb, a glue that melts, and sew with a sewing machine on the inside around the bottom of the pants. If you don't have a machine, pin the wonderweb every two or three inches all the way round.
  6. You should now see the leg with the chalk mark all round the bottom plus the inch and a half allowance. Bend the leg in so that the chalk mark is on the edge. Make certain that all is smooth and flat inside. Be careful of the pins if you used them.
  7. This melts the glue. Remove the pins if used and press lightly again to remove any little marks and you're done.
  8. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Unless your legs are different lengths, take care to get the lengths of both legs the same.
      • Irons and steam are hot enough, so keep hands and children away from them.
      • Be careful of the pins! That's why a sewing machine is better.
      • Read the washing instructions and verify that the fabric can tolerate the heat necessary for this process. For some delicate or synthetic fabrics, you may be better off doing the work by hand.
      Advertisement

      Things You'll Need

      • Fabric shears or pinking shears. Shears used to cut paper may be too dull to cut fabric, so get a good pair, mark them, and reserve them just for sewing.
      • Chalk
      • Ruler
      • Iron and damp cloth
      • A seam ripper, razor blade or something sharp to undo the original hem
      • Tape measure
      • Wonderweb about 1/2 in wide, from any haberdashery or fabric store

      About This Article

      Thanks to all authors for creating a page that has been read 149,857 times.

      Reader Success Stories

      • Ann-Marie McDonald

        Jul 4, 2016

        "Just giving me the courage to have a go at this helped. Have several pair of slacks needing shortening, and ..." more
      Share your story

      Did this article help you?

      Advertisement