PDF download Download Article PDF download Download Article

Taking down a dancing pole may seem pretty complicated, but these poles aren’t that hard to disassemble. They're actually secured to the ceiling and floor with tension, so you just need to decrease that tension to remove one. With a hex key and a little bit of elbow grease, you can take apart your pole in just a few minutes.

Part 1
Part 1 of 2:

Removing the Upright Pole

PDF download Download Article
  1. Look for a large, cylindrical joint along the bottom of your pole. Feel around the joint for a rubber grip, which helps you spin the pole or lock it in place. Twist the rubber clockwise to secure the pole in place so it doesn’t shift while you adjust it. [1]
    • The rubber grip is a thin strip that goes around the bottom joint of the pole.
    • Some poles may use screws to keep the pole from spinning instead of a rubber grip. To secure the pole, you’ll have to tighten these screws.
  2. Stand on your tiptoes or use a step-stool to reach the top section of your pole. Stick a hex key into each screw and turn them counterclockwise to loosen the screws a bit. Don’t remove them completely—just keep them loose so you can disassemble the pole. [2]
    • A hex key is also called an Allen wrench. You likely received one with your pole equipment, but they're available at hardware and big-box stores if you need a replacement.
    Advertisement
  3. Grip the center of the pole with both hands and slowly spin it to the left. This will shorten the pole and remove tension from the ceiling so you can tilt and remove the pole from its upright position. [3]
    • If you’re having trouble removing the pole on your own, ask a friend or family member for help.
  4. Since the pole isn’t screwed into the upper dome, you can easily separate them from one another. Set the dome portion aside so you can store it with the rest of your equipment. [4]

    Variation: If your pole has a metal joint and a thick, iron nut attached to the top of the pole to hold in place, loosen the screws on the joint and slide the joint to the bottom of the pole. Twist the iron nut counterclockwise to lower the pole and upper dome from the ceiling. Then, twist the upper dome off of the pole and remove the top half of the pole from the bottom half. [5]

  5. Advertisement
Part 2
Part 2 of 2:

Disassembling and Storing the Pole

PDF download Download Article
  1. Find a large, open space in your home where you can lay your pole horizontally. It’s a lot easier and safer to disassemble your dancing pole on the floor, since you don’t have to worry about holding it up while you take it apart. [6]
  2. Most at-home dancing poles can be broken down into at least 2 segments. Look along the center of the pole to see if there are any screws or joints connecting the middle of your pole. [7]
    • Many poles use hex screws, which can be removed with a hex key.
  3. Take a hex key and insert it into the central screws. Twist the hex key clockwise to loosen the screws and central joint of the pole. Continue twisting the screws until you feel a lot of pressure against the hex key. [8]
    • Since the screws are embedded in the center of the pole, you can’t remove them completely. Instead, you have to loosen them as far as they’ll go.
  4. Slide the bottom portion with the floor mount out of the center joint. Once the bottom section is separated, remove the top portion from your pole. [9]
    • Some dancing poles may not have a central joint, which is completely normal. For these types of poles, you can just unscrew the top pole from the bottom section. [10]
  5. Find the seam where the bottom of your pole connects to the bottom pole mount. Twist the pole counterclockwise to separate it from this bottom portion, then set it aside. [11]
  6. Feel around the small, metal portion attached to the bottom mount for screws. Loosen these with your hands, then lift the metal piece away. Store all of these metal pieces in one area so you can keep track of them. [12]
  7. Find some empty storage space in your home, like a closet or empty wardrobe. Keep both portions of the pole, the bottom mount, upper dome piece, and any other pole extensions in one place so you can find them later. [13]
    • Don’t keep your equipment in a cold place—cold temperatures tend to make metal contract, which may make it tricky to reassemble your pole later on. [14]
    • Some poles may come with a carrying case to store the equipment.
  8. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • If you’re having some trouble adjusting the screws, place an ice pack or something frozen on top. This may help loosen the screws, and make your pole easier to take apart. [15]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always check your user manual before you start disassembling your pole. Some pieces of equipment may have specific instructions, depending on the brand and type of pole. [16]
      Advertisement

      Things You’ll Need

      • Hex key
      • Screwdriver
      • Step-stool

      About This Article

      Thanks to all authors for creating a page that has been read 66,041 times.

      Did this article help you?

      Advertisement