Download Article
Download Article
A large pool of standing water is a telltale sign of a clogged drain. Standing water pools can attract insects, making your life difficult. However, there are several methods to clear a drain. Using a traditional plunger, or ingredients found at home, you can clear a drain quick.
Steps
-
Clear all the blockage from the drain. Wearing a pair of rubber gloves, pick out any debris that is blocking the drain. Oftentimes, hairs, soap scum, or other bathroom products can clog it. [1] X Expert Source David Balkan
Professional Plumber & CEO of Balkan Sewer & Water Main Expert Interview. 29 April 2021. By removing the blockage you may fix the standing water problem immediately. If the water remains, you will need to take further steps. [2] X Research source -
Remove all standing water from the sink or tub. [3] X Expert Source David Balkan
Professional Plumber & CEO of Balkan Sewer & Water Main Expert Interview. 29 April 2021. Before continuing, you need to remove all the standing water so that you can work on the drains. With a bucket, scoop out the water and dispose of it outside, or down a functioning drain. [4] X Research sourceAdvertisement -
Clear the overflow drain if there is one, then plug it with a rag. The overflow drain will usually sit below a tap. If the water level gets too high, the overflow drain helps the main drain get rid of the water. If there is an overflow drain, open it. An attached long coil will run down the drain. Put on a pair of rubber gloves. Remove any hairs, scum, or miscellaneous blockage attached to the coil. [5] X Research source
- A clogged overflow drain can contribute to a standing water problem. [6]
X
Expert Source
David Balkan
Professional Plumber & CEO of Balkan Sewer & Water Main Expert Interview. 29 April 2021. - Not all drains have a corresponding overflow drain. If there isn't one, disregard this step.
- A clogged overflow drain can contribute to a standing water problem. [6]
X
Expert Source
David Balkan
-
Begin plunging the drain, pushing in and out. [7] X Expert Source David Balkan
Professional Plumber & CEO of Balkan Sewer & Water Main Expert Interview. 29 April 2021. Place the plunger over the entirety of the drain. The suction cup will prevent any air from leaving. Then, keep pushing the handle in and out. This will clear any blockages move them towards the plunger. You will know you've cleared the drain when you hear the pipes begin to empty. [8] X Research source- Patience is key when plunging. It's rarely a fast process, but it is an effective one.
-
Run hot water down the drain for 5-10 minutes to clear any other blockages. Once you hear the drain clear of the blockage, remove the plunger. Turn a hot tap on and let it run through the pipes for 5-10 minutes. This will help clear any residual blockages.
Advertisement
-
Remove any blockage in the drain. Hairs, bathroom products, or any other debris can cause the initial blockage. Use a pair of rubber gloves to remove and dispose of any debris clogging the drain. If this fixes the issue, you don't need to continue with the chemical cleansing process. [9] X Research source
-
Empty the sink or tub so no water remains. You won't be able to chemically clean the drain when standing water remains. Use a bucket or cup to empty any of the standing water remaining in the tub or sink. [10] X Research source
-
Prepare 1 cup (180g) of baking soda and 1 cup (240 mL) of vinegar. Instead of using store-bought chemicals, you can use chemicals found in your kitchen to clear the drain. Fill 1 cup (180g) with baking soda and 1 cup (240 mL) with a household vinegar. Any vinegar will work for this process. The more acidic the vinegar, the more effective it will be.
-
Pour 1/2 cup (90g) of baking soda down the drain. Bring the chemicals beside the drain you're seeking to unblock. Pour 1/2 (90g) a cup of the baking soda down the drain. Make sure that it covers most of the interior. Use a long stick to push the baking soda as far down the drain as possible. [11] X Research source
-
Pour 1 ⁄ 2 cup (120 mL) of vinegar down the drain then cover it with a rag. Once the baking soda is coating the inside of the pipe, slowly pour 1 ⁄ 2 cup (120 mL) of vinegar down the drain. You should hear fizzing. This means the desired chemical reaction is working. Once you hear the fizzing, cover the drain with a rag. [12] X Research source
-
Repeat the baking soda and vinegar process a second time. Listen to the fizzing. When it stops, remove the rag and pour the other 1/2 cup (90g) of baking soda down the drain. Then pour 1 ⁄ 2 cup (120 mL) of vinegar as well. Let the process repeat, covering the drain with a rag. [13] X Research source
-
After 30 minutes, pour hot water down the drain. After using the last of the baking soda and vinegar, wait for a full 30 minutes. Then, boil a kettle full of water. Slowly pour the boiling water down the drain. This will clear the remnants of the clog and the chemicals still in the drain. [14] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Things You'll Need
Plunging the Drain
- Rubber gloves
- Plunger
- Rubber gloves
- 1 cup (180g) of baking soda
- 1 cup (240 mL) of vinegar
- A rag
- Boiling water
References
- ↑ David Balkan. Professional Plumber & CEO of Balkan Sewer & Water Main. Expert Interview. 29 April 2021.
- ↑ https://www.readersdigest.co.uk/lifestyle/home-garden/how-to-clear-blocked-drains
- ↑ David Balkan. Professional Plumber & CEO of Balkan Sewer & Water Main. Expert Interview. 29 April 2021.
- ↑ https://www.familyhandyman.com/plumbing/drain-repair/unclog-a-bathtub-drain-without-chemicals/view-all/
- ↑ https://www.thisoldhouse.com/how-to/clear-any-clogged-drain
- ↑ David Balkan. Professional Plumber & CEO of Balkan Sewer & Water Main. Expert Interview. 29 April 2021.
- ↑ David Balkan. Professional Plumber & CEO of Balkan Sewer & Water Main. Expert Interview. 29 April 2021.
- ↑ https://www.thisoldhouse.com/how-to/clear-any-clogged-drain
- ↑ https://www.readersdigest.co.uk/lifestyle/home-garden/how-to-clear-blocked-drains
- ↑ https://www.familyhandyman.com/plumbing/drain-repair/unclog-a-bathtub-drain-without-chemicals/view-all/
- ↑ https://crunchybetty.com/clean-your-drains-baking-soda-vinegar/
- ↑ https://crunchybetty.com/clean-your-drains-baking-soda-vinegar/
- ↑ https://crunchybetty.com/clean-your-drains-baking-soda-vinegar/
- ↑ https://crunchybetty.com/clean-your-drains-baking-soda-vinegar/
About This Article
Article Summary
X
To unclog a drain with standing water, start by clearing any visible blockage by putting on rubber gloves and pulling it out. If there's still standing water around the drain, scoop the water out with a bucket. Then, place your plunger over the entirety of the drain and push the handle in and out to move deeper blockages towards the surface. Since this can take some time, try to be patient and keep plunging until you hear the pipes begin to empty. Once the drain is cleared, remove the plunger and run hot water through the pipes for 5 to 10 minutes to clear any residual blockages. For more tips, including how to use baking soda and vinegar to unclog a drain, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 192,905 times.
Reader Success Stories
- "It worked with just the plunger method! Silly me, it never came to mind. I immediately thought of the snake and chemicals. So easy with the plunger." ..." more
Advertisement
"It worked with just the plunger method! Silly me, it never came to mind. I immediately thought of the snake and chemicals. So easy with the plunger."
..."
more
