Download Article
Learn how to pull the clutch and shift gears like a pro
Download Article
How to clutch on a dirt bike.
Steps
-
Take off: Start the bike, compress the clutch and then push the shift lever downwards ( most bikes shift pattern is Down for first, and up for the following gears ) [1] X Research source
-
Once the bike is in gear, very slowly let the clutch out while applying throttle at an equal rate. This is often the hardest part for beginners. If the engine RPM suddenly drops, that either means you are not giving enough throttle, or you are releasing the clutch too rapidly, or perhaps both. Once in first gear and moving, shifting to the next gears is much easier. [2] X Research sourceAdvertisement
-
To shift to second, pull in the clutch lever, at the same time release the throttle. Doing so in sync will keep the engine RPM from spiking. Lift the shifter lever until there is a firm click into the next gear. [3] X Research source
-
Once in the next gear, let off the clutch and apply throttle, in sync with the clutching. You may then accelerate and shift into the next gear using the same process.
-
To shift down, ease off the throttle until your speed is roughly equal to the higher end speed of the lower gear. [4] X Research source
-
Compress the clutch while letting off the throttle, shift down, then let the clutch out while applying little throttle. You will be in the top end of the gear most likely, and applying too much throttle will cause your RPM to spike.
-
Hit neutral: In a bike with a shift pattern that is Down, Up, Up, you will need to get to first gear, and then raise the shift lever halfway between first and second. This is often hard to do for beginners. An easy way to hit neutral on most bikes is to shift to neutral while still moving. [5] X Research source
Advertisement
Community Q&A
Search
-
QuestionCan I use the brakes without holding the clutch?Community AnswerYes, but when you start to slow down, rapidly lay off the gas and pull in the clutch to avoid stalling.
-
QuestionDo I use the clutch while turning a bike?Community AnswerYou should pull in your clutch and shift to a lower gear, and make the turn while slowly accelerating.
-
QuestionDo I use the clutch while driving?Community AnswerNever use the clutch while driving. Doing so will damage the clutch and decrease the life of the engine.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If it is your first time, it is best to start with a smaller bike. A 100cc dirt bike is ideal. 85cc will also work. If you start with something too big, there is a chance you will be kicked off the back of the bike on take off.Thanks
- You should Always clutch so as to prolong the life of the bike transition, and other parts. If you shift straight to a higher gear without clutching you may stall the bike or cause gear damage.Thanks
- Practice makes perfect.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure you have a helmet and proper gear ( gloves, boots, etc. )Thanks
- DO NOT WEAR OPEN TOED SHOESThanks
- If you are new to dirt biking, start in an open area with few or no objects that may be hit.Thanks
- Take care when using a bike larger than you are. You could be thrown off, or may lose control. Some bikes are much heavier than they look, and can cause severe injury if they land on you,Thanks
Advertisement
Things You'll Need
- Dirt bike ( preferably of small displacement if you a beginner )
- Helmet
- Open area to practice
- Optional, but recommended: Somebody to watch and help you in case you fall off or injure yourself.
References
About This Article
Thanks to all authors for creating a page that has been read 115,553 times.
Advertisement