PDF download Download Article PDF download Download Article

If your TV is freezing and the picture becomes pixelated, this usually means the TV signal was disrupted or is weak generally. However, the specific reason may vary depending on your TV service provider and the type of TV service you have. Before you call your internet, cable, or satellite company, we here at wikiHow have found some things you can try to get your picture working again.

Fixing Freezing and Pixelation on a TV

  • Plug your TV directly into your router to correct any connection issues.
  • Unplug the HDMI cable, wait 30 seconds, then plug it back in to reset the connection.
  • If your TV is freezes when you're trying to use an app, update the app and try again.
8

Bypass the splitter.

PDF download Download Article
  1. You might have a splitter if you have cable going to more than one room of your house. Unscrew the coax from both sides of the splitter, then connect the coax coming from the wall directly to your cable box. [8]
    • Keep in mind that while this might fix your picture issue, it also means that the cable going to another room will no longer work. You might need to have your cable company send a tech out to resolve the issue if it's important to have cable in both rooms at the same time.
    • Cable splitters reduce the strength of the signal by half, so if you're getting a weak signal, the splitter might be the culprit.
11

Move your antenna if you watch over-the-air channels.

PDF download Download Article
  1. If you're not sure where the nearest broadcast tower is, search for a map on the internet. It also helps if your antenna is as high up as you can put it, such as at the top of a window. [10]
    • You might get a stronger signal with an external antenna. However, they're more expensive than interior antennas and can be difficult to install because they might require you to go out on your roof.
    • Check for obstructions that might be interfering with your signal as well. If there's been new construction in your area and there's a building between your antenna and the broadcast tower, you might not get the best signal anymore.
  2. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • In the spring and fall, the path of the sun aligns with many broadcasting satellites and might cause interference. This is particularly likely mid-morning and early afternoon. If your picture freezes or pixelates due to solar interference, there's nothing to do but wait. [12]
      • Check other TVs in your home to see if they all have the same issue. That can help you narrow down whether the issue is with a specific TV setup or with your TV service provider.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Resetting your TV or receiver might also reset your preferences. Check your features and make sure they're still how you want them, especially if you have parental controls set up. [13]
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 261,118 times.

      Is this article up to date?

      Advertisement