How to Fix a Whirlpool Washer That Won't Drain

Download Article

Why your washer won't drain, and what you can do to fix it

Co-authored by Egor Shevtsov and Eric McClure

Last Updated: October 30, 2024 Fact Checked

Download Article

Error Codes

|

Inspect the Hose

|

Open & Close the Lid

|

Drain Pump Filter

|

Excess Soap

|

Clothes Are Still Soaked

|

Q&A

If you’ve got standing water in your Whirlpool mashing machine, start by checking the hose for kinks or blockages. Then, try cleaning out the filter and re-closing the lid. If your washing machine still isn’t draining, try waiting a few hours. If, after waiting a few hours and having checked your hoses for blockages, your washer still doesn't drain, follow the basic troubleshooting for draining issues in this wikiHow before calling a professional.

Things You Should Know

Remove any kinks in the drain hose and make sure the hose sits between 39–96 inches (99–244 cm) off the ground.
Open and close the lid to see if the cycle reactivates.
Access the drain filter at the bottom of the machine and clean it thoroughly if the drum still won’t drain.

Get Product Support Solve Any Problem

Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!

*

Section 1 of 6:

Check the Error Codes

Download Article

Your Whirlpool may tell you what’s wrong with a code. If you’ve got water in your drum and random letters and numbers on the display screen, you can look up the meaning of the error code here online, and follow the steps to resolve the underlying problem. A few common errors include: ^{[1]
X
Research source}
- Sud, Sd, or 5D . This is short for “suds.” Basically, the machine detects too much detergent. Just wait for the bubbles to dissipate and the cycle will automatically finish.
- F21, or F9 E1 . Your washer cannot drain. Follow the rest of the steps in this article to identify what’s causing the problem and fix it.
- Int . The machine’s cycle was “interrupted.” There could have been an electrical surge or the lid was opened mid-cycle. Follow the steps below to get the water out.

Section 2 of 6:

Inspect the Hose

Download Article

1
Remove any kinks and try straightening the hose. Locate the drain hose in the back of your machine. Slide the washing machine out away from the wall if necessary and inspect the hose. If it’s all pretzeled up behind your washing machine, the water probably can’t drain out properly. Gently undo any kinks and smooth the hose out. Press “start,” and the water should drain out. ^{[2]
X
Research source}
- If your washing machine is tucked in a closet and you’re thinking, “Ugh, I really don’t feel like pulling it out to look at some hose,” we feel you. Go ahead and try the other solutions outlined in the other section first.
2
Check the hose’s height to confirm it isn’t too low or high. Grab a measuring tape and check the distance from the end of the drain hose to the floor of the machine. If the end of the hose is higher than 96 inches (240 cm) off the floor or lower than 39 inches (99 cm) from the floor, readjust the height of the hose. Whirlpool explicitly states that the hose must be between 39–96 in (99–244 cm) from the ground for the water to drain properly. Adjust the hose as needed and press “start” to drain the drum. ^{[3]
X
Research source}
- If the hose drains directly into a sink, make sure that no more than 4.5 inches (11 cm) of the hose sits inside the tub of the sink. If the hose is too close to the bottom of the sink, the water may siphon backwards into the machine.
3
Inspect the hose for blockages and remove them if necessary. If the hose appears unkinked and it’s appropriately set up, shine a flashlight in the hose to see if there are any blockages. If there are, remove them by flushing water down the hose or digging the blockage out with a wire hanger or snake. ^{[4]
X
Research source}
- Press “start” when you’re done. If the water still won’t drain, the problem is 100% not the hose.

Section 3 of 6:

Open & Close the Lid

Download Article

If the lid lock malfunctioned or was left open, this will fix the problem. Whirlpool washing machines will automatically shut off if the door isn’t closed. Try opening and closing the lid to reengage the lock. If you’re lucky, the machine will immediately reengage or drain the water.
- Most Whirlpool models automatically drain the drum if the lid is left open for 10 minutes. Try leaving the lid open for 10 minutes to see if the machine drains.
  - If this doesn’t work, you’ve probably got an issue with the pump filter.

Section 4 of 6:

Check the Drain Pump Filter

Download Article

Locate the filter behind the little panel on the bottom. Look at the bottom of the machine for a panel. Gently pull that panel out and find the filter, which is the circular opening next to the small drain hose. Turn the circular component counterclockwise and gently pull it out of the machine. Remove any lint, debris, or gunk by hand. Then, rinse the entire thing under cool water. Once it’s mostly clean, reinstall it in the machine by twisting it clockwise into the opening at the bottom. Press “start,” and your washer should drain. ^{[5]
X
Research source}
- This circular component is the drain pump filter. It’s designed to keep debris and gunk from the machine out of the drain pump. If it gets super clogged up, the machine won’t be able to drain properly.

Section 5 of 6:

Do you see a lot of soap?

Download Article

Do you see a ton of bubbles and soap buildup in the water? If so, your machine will likely shut off automatically. Whirlpool machines will stop operating if they detect too much soap to avoid overflowing. Wait 1-2 hours. The machine should automatically drain on its own if the hose isn’t blocked. ^{[6]
X
Research source}

Section 6 of 6:

Is the cycle complete but your clothes are soaked?

Download Article

1
You likely chose a delicate or low spin cycle. If your clothes are still really wet, but the cycle is over, and there’s no pool of water in the drum, check the cycle you chose. The delicate cycle, alongside the lower spin cycles and custom cycles, doesn’t utilize heavy drum speeds to squeeze out the excess water in the rinse cycle. The upside is that this is less wear and tear on your clothes. The downside is that these cycles don’t remove all of the water. ^{[7]
X
Research source}
- If you don’t want your clothes to be soaked in the future, run a normal cycle. If you’re worried about messing your clothes up or adding to the wear and tear, use cold water.
If your drum is almost entirely full, the machine may have trouble extracting all of the water. In the future, only fill the drum up roughly halfway. It may be tempting to get everything done in one load, but your clothes are going to get cleaner and end up much dryer if you do a bunch of smaller loads.

Community Q&A

Search

Add New Question

Question

My Whirlpool will not advance to spin. It just keeps running the pump.

Justin

Community Answer

There may be an electrical component failure. If you aren't comfortable or experienced with testing electrical components, call an appliance service professional to resolve the issue.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 5

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

[1]

[2]

[3]

[4]

[5]

[6]

[7]

Log in

How to Fix a Whirlpool Washer That Won't Drain

Things You Should Know

Steps

Get Product Support Solve Any Problem

Check the Error Codes

Inspect the Hose

Open & Close the Lid

Check the Drain Pump Filter

Do you see a lot of soap?

Is the cycle complete but your clothes are soaked?

Community Q&A

Tips

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories