PDF download Download Article
The likely reasons for a false alarm when there’s no fire
PDF download Download Article

You’re going about your day when your smoke alarm randomly goes off. While it may be annoying, it’s not uncommon! Smoke alarms can give a false alarm for many reasons, from overcooking food to high humidity levels to a dying battery. But how do you know why your alarm is going off randomly? Read on to learn what may be causing a false alarm and how to fix it.

Reasons Your Smoke Alarm Goes Off

The most common reasons your smoke alarm might go off randomly are that it needs a new battery, detected smoke from burnt or overcooked food, or sensed steam from a hot shower.

Section 1 of 6:

Common Causes of False Alarms

PDF download Download Article
  1. Searing your steak or getting a nice char on your veggies may cause a smoke alarm to suddenly go off. While you may not have made a lot of smoke, experimenting in the kitchen can create enough to trigger the alarm (even if there’s not a real fire). [1]
    • Troubleshoot: Remove food and pans from the heat. Open windows and doors and turn on fans (specifically an exhaust fan) to ventilate the area.
  2. If your smoke alarm is near a bathroom or kitchen, it’s quite common for the alarm to be triggered by hot steam from the shower or stovetop. So, if the alarm starts going off after you’ve taken a hot shower or boiled some pasta and there’s no smoke in sight, steam is likely the cause. [2]
    • Troubleshoot: Move the alarm at least 36 in (91 cm) away from bathroom doors and cooking appliances.
    Advertisement
  3. Sometimes, a smoke alarm can beep or alarm when the detector itself is dirty. Dust, dirt, cobwebs, and even insects can block the sensor and make the alarm falsely sound. [3]
    • Troubleshoot: Use compressed air or a vacuum to clean around the detector.
  4. Smoke alarms work best in 40 to 120 °F (4 to 49 °C). If the temperature rises or drops above or below these levels, it may cause a false alarm. [4]
    • Troubleshoot: Check the manufacturer’s instructions for your alarm’s ideal temperature range (this may be listed on the alarm). Then, determine if the room is above or below that temperature.
  5. Spraying too much hairspray, perfume, or air freshener could cause a false alarm. If you just sprayed something under or near a smoke alarm, this is likely the cause of its sudden and random beeping
    • Troubleshoot: Spray less product and move away from the detector when spraying in the future.
  6. Older smoke alarms can be set off in humid conditions. Unlike today’s models, older alarms are not designed to withstand high humidity. [5]
  7. If your smoke alarm has faulty wiring or a low voltage issue, it may give off false alarms. This is most common in hardwired detectors (detectors wired directly to your home’s electrical system and don’t necessarily need a battery) that need replacing.
    • Troubleshoot: Schedule regular maintenance on a hardwired detector to ensure all wiring is up to date.
  8. If your smoke alarm is making short, frequent, high-pitched beeps or chirps, it’s likely because the batteries need to be replaced. This typically happens every 10 years. [6]
    • Troubleshoot: Hush the alarm (if you can) by pushing the button on the detector. Replace the battery as instructed on the alarm, or replace the alarm itself.
    • While most fire alarms have a 10-year battery life, firefighter David Decker still suggests changing the battery “whenever there’s a time change for daylight savings time.” This ensures your fire alarm is in pristine condition and won’t die.
  9. Advertisement
Section 2 of 6:

How to Test Your Smoke Alarm’s Sensitivity

PDF download Download Article
  1. If your smoke alarm keeps going off randomly, it might be a good idea to check its sensitivity to determine whether or not it should be replaced. There are many ways you can test your detector , such as: [7]
    • Holding down the alarms’s test button and waiting for the alarm to sound. [8]
    • Buying smoke alarm test spray and using it on the detector as instructed on the product’s packaging.
    • Using the testing instrument that came with your smoke alarm upon purchasing.
    • The National Fire Protection Association (NFPA) recommends testing alarms every month. [9]
Section 3 of 6:

Where should you put smoke alarms?

PDF download Download Article
Section 4 of 6:

Upgrading Your Smoke Alarms

PDF download Download Article
  1. It’s recommended to upgrade smoke alarms every 10 years and replace the batteries every year. [11] But if your alarm is extremely sensitive and keeps giving false alarms, it might be time to upgrade. Newer models have fancier features that help prevent false alarms and ensure a smoother experience. Here are some things you might want to look for when upgrading your smoke alarms:
    • Dual-sensor technology: These detectors use ionization and photoelectric sensors to detect more types of fires.
    • Wireless interconnection: Detectors with this feature communicate with one another. If one goes off, they all go off. [12]
    • Hush button: This feature allows you to silence an alarm for a short period of time by pressing a button on the detector.
    • Carbon monoxide detection: Detectors with this feature detect smoke and carbon monoxide.
Section 5 of 6:

When to Call a Professional

PDF download Download Article
  1. An electric and plumbing expert will be able to work out what’s wrong with your smoke alarm and help you find the best and safest upgrade for you.
    • Similarly, you can also call up the non-emergency line or fire prevention department, as most municipal fire departments or local fire marshals will inspect smoke alarms for free. [13]
  2. Advertisement
Section 6 of 6:

How do smoke alarms work?

PDF download Download Article
  1. There are 2 types of smoke alarms: photoelectric and ionization. [14] Both types of alarms are designed to detect an increase in heat levels to set off an alarm to protect your from danger, but how they do so is a bit different: [15]
    • Photoelectric smoke alarms use a beam of light to detect heat. There’s an internal chamber inside the alarm with a beam of light in it. When smoke enters the chamber, the light is disrupted, and the alarm will sound.
    • Ionization smoke alarms use electrodes to detect high temperatures. Inside the alarm’s chamber is an electrode or electrical conductor. When smoke enters the chamber, the particles cling to the electrode, disrupting the chemistry and setting off the alarm.
    • Dual-sensor smoke alarms contain photoelectric and ionization sensors for double the safety. [16]
    • Smoke alarms that use strobe lights instead of loud beeps to indicate a fire are also available for those with hearing loss. [17]

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Did you know that you can request a free smoke alarm? In some states, you can ask your local fire department or city government for a free alarm. [18]
      • There’s a difference between smoke “alarms” and smoke “detectors.” Smoke alarms have a sensor to monitor smoke and speakers to create a loud alarm. Smoke detectors can only sense smoke. [19]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 1,179 times.

      Did this article help you?

      Advertisement