How to Wire, Power, and Tap LED Light Strips

PDF download Download Article
Add a bit of colorful flair to any room
PDF download Download Article

LED lights are a great way to add functional lighting or a bit of flair to a space. They’re also super easy to wire. You can connect an LED strip to an adapter and then plug it in to power it. You can also use a wire splicer to tap your LED lights into an existing and functioning wire to provide power for the lights.

Things You Should Know

  • Use scissors to cut the strips to your desired length, cutting along the indicated lines.
  • Attach a wire connector to the end of the strip, aligning the positive and negative terminals according the symbols on the strip and connector.
  • Attach the wires into the appropriate ports on the adapter. Then plug the adapter into a power supply cord, and plug the cord into an outlet.
Method 1
Method 1 of 2:

Powering LED Strip Lighting

PDF download Download Article
  1. The strip of LED lighting needs to be trimmed to the size you need it to be before you can use it. Take a pair of scissors and cut along the dotted lines indicated on the strip. [1]
    • You can cut the strip to be any length you need, but you must cut along the dotted lines.
    • The cutting distance, or the distance between the dotted cut lines, can vary depending on the manufacturer.
    • If you don’t cut along the indicated lines, some of the lights will not turn on.
  2. A wire connector is a fastener that allows you to connect 2 or more wires together so they can power the lights. Align the red wire on the connector with the positive (+) mark on the strip and the black wire is aligned with the negative (-) mark on the strip. Gently pull back the black locking bar at the end of the connector. Slide the end of the strip into the connector and then push the black bar back into place to lock the strip into position. [2]
    • Lightly tug at the strip to make sure it’s securely locked into the connector.
    • You can find connectors at hardware stores, electronic stores, and online.

    Tip: If you don’t have a connector with a locking bar for you to insert the wires, use a soldering iron to fuse the positive wire to the positive connection and the negative wire to the negative connection.

    Advertisement
  3. Connect the positive wire of the strip to the positive slot on the adapter, then connect the negative wire to the negative slot on the adapter. Then, take a small flathead screwdriver and tighten the screws on the adapter so the wires are secure. [3]
    • Give the wires a gentle pull to make sure they’re firmly attached.
  4. Once the wires are securely attached to the adapter, plug in a power supply cord into an outlet. Then, plug the power cord into the slot on the adapter. The lights on the strip will turn on. [4]
    • Cover the LED strip with a plastic or aluminum casing to keep them protected.
    5. Advertisement
Method 2
Method 2 of 2:

Tapping LED Lights into Wires

PDF download Download Article
  1. Test the lights to identify the negative and positive wires. Check near where the wires are connected to the light and look for a positive (+) or a negative (-) symbol. If there isn’t one, connect the wires to a car battery to find out the correct order. If the lights don’t turn on, switch the wire connections. When the lights do turn on, note which wire was connected to the positive terminal and which was connected to the negative terminal.
    • The wires connected to the LED lights need to be plugged into a power source correctly in order for the light to turn on.
    • Generally, red wires indicate a positive connection and black wires indicate a negative connection.
    • You may not be able to tell which wires are positive or negative due to their coloring or lack of labeling. [5]
  2. A splicer is a device you can use to tap into an existing power supply and connect new wires that can draw power from it. Pull the metal pin back on the splicer with your fingers or a pair of pliers so you can fit it over the wire. Slip the splicer over the wire. [6]
    • Be sure to use a functioning wire that you want to tap power from for your LED lights.
    • Use a splicer with a gauge that fits over the wire you want to tap.
    • You can find splicers at hardware stores and online.

    Warning: Unplug the wire you plan to tap before you start working on it to avoid accidentally shocking yourself.

  3. Connect the positive wire to the positive slot and the negative wire to the negative slot on the splicer. The wires won’t be secure, but they need to be inserted as far as they can go into the slot. [7]
    • Usually, the positive wire will go into the slot on the right and the negative wire on the left.
    • You don’t have to strip the sheathing around the wires
  4. Once the wires are inserted into the slots, take a pair of pliers and squeeze on the metal pin. Continue to apply pressure until it penetrates the sheath of the wire you’re splicing into. [8]
    • Don’t snap down the pliers or squeeze too hard or you could crack the splicer.
  5. After the pin has been pushed into the wire, give the wires a gentle tug to make sure they’re secure. Then, close the cover of the splicer until it snaps closed and is secure. [9]
    • The cover will keep the pin of the splicer from coming into contact with anything and prevent power from escaping the wire.
  6. Restore power to the tapped wire by plugging it into an outlet. The lights will draw power from the cord that you spliced into and turn on. [10]
    • The LED lights will turn on whenever the tapped wire has power running through it.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How long can I leave the LED lights on?
    Garrie Nassau
    Community Answer
    If you use a high-quality LED brand, you can leave them on 24/7 without significantly using up their lifespan. Also, most LED light strips come with a warranty if you have any problems with them.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      Powering LED Strip Lighting

      • Scissors
      • Wire connectors

      Tapping LED Lights into Wires

      • Wire splicer
      • Pliers

      You Might Also Like

      Easiest Way to Install LED Strip Lights
      How to
      Test LED Lights
      How to
      Cut Led Strip Lights
      How to
      Daisy Chain Lights
      How to
      Make a Homemade Flashlight
      How to
      Hang Fairy Lights
      How to
      Install a New Light Fixture
      How to
      Wire a Light
      How to
      Install a Pendant Light
      How to
      Install a New Ceiling Light Fixture
      How to
      Connect LED Strip Lights
      How to
      Test Fluorescent Bulbs
      How to
      Replace a Fluorescent Light Cover, Tube, or Fixture
      How to
      Replace a Recessed Bulb (Without Removing the Fixture!)
      Advertisement

      References

      1. ↑ https://youtu.be/bTRLt-fzTwg?t=14
      2. ↑ https://youtu.be/bTRLt-fzTwg?t=213
      3. ↑ https://youtu.be/bTRLt-fzTwg?t=276
      4. ↑ https://youtu.be/bTRLt-fzTwg?t=322
      5. ↑ https://youtu.be/HAshrnmaWSo?t=40
      6. ↑ https://youtu.be/HAshrnmaWSo?t=239
      7. ↑ https://youtu.be/HAshrnmaWSo?t=275
      8. ↑ https://youtu.be/HAshrnmaWSo?t=324
      9. ↑ https://youtu.be/HAshrnmaWSo?t=344
      1. ↑ https://youtu.be/HAshrnmaWSo?t=344

      About This Article

      Thanks to all authors for creating a page that has been read 71,479 times.

      Reader Success Stories

      • Mette

        Dec 6, 2022

        "I have learned how connect LED bulbs, which was a problem for me."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement