How to Clean Mold Off Walls

PDF download Download Article
PDF download Download Article

Mold on your walls can be unsightly, and even cause health problems if it gets out of control. Fortunately, you can remove mold quite easily, often with cleaning supplies that you already have in your home. You’ll also want to make sure that you have the necessary safety materials before starting. If you’re well-prepared and have patience, removing mold from finished, wood, or tile walls be a simple and inexpensive process.

Method 1
Method 1 of 3:

Removing Mold from Finished Walls

PDF download Download Article
  1. Your mixture should be 3 parts water to 1 part bleach. Pour the bleach into the bucket while you’re adding your water to ensure that the solution mixes evenly. Avoid spills by pouring your liquids slowly. [1]
    • While working with bleach, make sure you wear rubber gloves, protective eyewear, and a dust mask or respirator, since bleach tends to cause irritation to the lungs. [2]
  2. You’ll want your brush to have hard, durable bristles. Begin scrubbing the mold by applying heavy pressure in a circular motion. Continue scrubbing until the mold stains are visibly gone.
    • Tile joint brushes and hand brushes make excellent choices for mold removal. [3]
    • If you’re not getting results, let the bleach soak into the wall for several minutes before trying to scrub. [4]
    Advertisement
  3. You should try to maximize the amount of time your wall is in contact with the bleach, which means you’ll want to let you wall rest for a while. If the wall is excessively wet, soak up some of the excess water and bleach with a disposable rag. [5]
    • It may be several hours before your wall completely dries. It all depends on the humidity and temperature, both indoors and outdoors.
  4. It may take multiple applications of bleach and water to fully remove the mold. Your wall is not entirely free of mold until all visible stains and signs of the mold have completely disappeared. [6]
    • If you cannot remove the mold after several applications of bleach and water, consider replacing the moldy section of your wall.
    5. Advertisement
Method 2
Method 2 of 3:

Getting Mold off of Wooden Walls

PDF download Download Article
  1. Use a vacuum hose or handheld vacuum and turn it on the highest setting. Put your vacuum directly on the wood and run it across the moldy wood by moving it back and forth. Do this for several minutes in order to remove any loose mold spores that aren’t settled into the wood yet. [7]
    • While vacuuming your wood, make sure that you wear rubber gloves, protective goggles, and long sleeves and pants. Wear your dust mask or respirator as well, since the loose spores could travel into your lungs. [8]
  2. Fill a bucket with 1 part warm water and 1 part dishwashing detergent. Dip your soft-bristled scrub brush into the bucket and begin to gently scrub the wood. You should see the wood visibly begin to clear after several scrubs. Continue to scrub your wood until the mold is completely gone. [9]
    • If there’s still mold on the wood after you’ve scrubbed it, repeat the process with vinegar instead of warm water and dishwashing detergent.
    • Don’t scrub too hard or you’ll risk removing the wood’s paint or sealant.
    • You can use an ammonia-free soap instead of dishwashing detergent if you prefer. [10]
  3. If the wood is unfinished or penetrated by the mold, you need to create a stronger cleaning solution. Fill a bucket with 1 part detergent, 10 parts bleach, and 20 parts warm water. Scrub the unfinished or penetrated wood with a scrub sponge or stiff brush and allow it to air dry. [11]
  4. If there’s still mold after you’ve scrubbed with detergent, soap, water, and bleach, you’ll likely need to sand the wood to remove the layer of mold. Use a piece of sandpaper and rub it into the wood in short, aggressive circular motions. Apply heavy pressure while scraping your wood. After the mold is visibly gone, reseal your wood with paint or sealant. [12]
    • 40-150 grit sandpaper is a good starting point for the sanding process, since you need to remove an entire layer of wood to remove all of the mold. [13]
    • You’ll get sawdust everywhere when sanding your wood, so put down a towel or tarp for a quicker clean up!
    5. Advertisement
Method 3
Method 3 of 3:

Removing Mold from Tiles and Grout

PDF download Download Article
  1. To start, liberally spray your tiled wall with a tile-safe household cleaning product, like CLR or Lysol. This will weaken any thicker layers of mold and also remove any oil or soap residue to make cleaning easier. You won’t be able to reach the deeper layers of mold in your wall until these thicker layers of mold and dirt are removed first. [14]
    • While using household cleaners, wear rubber gloves, protective eyewear, a dust mask or respirator, and heavy clothing. Many household cleaners are skin irritants, and you’ll want to avoid coming into contact with them.
  2. You can use a standard scrub brush, or a thicker bristled-brush if you’d like. Scrub aggressively in a circular motion to ensure that you’ve covered every section of your tile at least twice. Wipe away the excess cleaning solution with a dry towel or rag. [15]
  3. You’ll likely have a layer of moldy residue staining the grout between your tiles. Fill an empty spray bottle with bleach and liberally coat the affected area. Let the bleach soak for 10 minutes, and lightly scrub your tile with a scrubbing brush. Wash the tiles with water to remove any excess cleaning material. [16]
    • You can use hydrogen peroxide if you don’t have any bleach. [17]
    • Spot test bleach on any ceramic tile by applying a small amount to a discrete area. Some tiles will be discolored by bleach, so you want to be careful. [18]
    • Reader Poll: We asked 308 wikiHow readers which chemical solution they prefer to use to clean mold, and only 10% of them said 3% hydrogen peroxide. [Take Poll] While peroxide can be effective at removing mold, bleach may work better.
  4. If the bleach and soap were ineffective, fill a large bowl with baking soda. Add a small amount of water and mix it in your bowl to create a thick paste. Apply the paste to the stained area with a toothbrush and scrub. [19]
    • If you still can’t get the mold out, it’s possible that you may have to replace the grout altogether.
  5. You should wash away any excess cleaning materials by rinsing your tile wall with cold water. You can wash your tile by taking a wet cloth and lightly wiping the entire area. Lay down a towel or tarp to avoid getting your floor wet. Let your wall air dry.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you get rid of mold on walls permanently?
    Raymond Chiu
    House Cleaning Professional
    Raymond Chiu is the owner of Maid Sailors Cleaning Service, offering affordable residential and office cleaning services. Since its founding in 2014 in New York City, Maid Sailors has expanded to several cities, including Boston, Chicago, and Austin. The company has earned a reputation as one of the most reliable and best cleaning services in the industry.
    Raymond Chiu
    House Cleaning Professional
    Expert Answer
    A ratio of three parts water to one part bleach is ideal for cleaning mold off your walls. Use a brush to scrub the solution into the affected areas. Be careful not to scrub too hard because you might damage some types of wallpaper and paint. If you can, do a spot test in an inconspicuous area first.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      Removing Mold from Finished Walls

      • Rubber gloves
      • Eye goggles
      • Long sleeves and pants
      • Respirator or dust mask
      • Chlorine bleach
      • Stiff brush
      • Sponge or cloth

      Getting Mold off of Wooden Walls

      • Rubber gloves
      • Eye goggles
      • Long sleeves and pants
      • Respirator or dust mask
      • Vacuum
      • Dishwashing detergent
      • Bucket
      • Soft-bristled scrub brush
      • Dishwashing detergent
      • Bleach
      • Scrub sponge or stiff-bristled brush
      • Sandpaper

      Removing Mold from Tiles and Grout

      • Rubber gloves
      • Eye goggles
      • Long sleeves and pants
      • Respirator or dust mask
      • Household cleaner
      • Scrubbing brush
      • Rag or towel
      • Spray bottle
      • Bleach or hydrogen peroxide
      • Baking soda
      • Toothbrush

      You Might Also Like

      How to
      Clean Mold off of a Ceiling (Plus Prevention Tips)
      How to
      Get Rid of Nicotine Stains on Walls
      The Best Ways to Clean Your Ceiling (Plus How Often to Do It)
      How to
      Remove Sticky Tack Stains from Walls
      How to
      Clean Smoke Off of a Ceiling
      How to
      Clean Walls with Vinegar
      How to
      Clean Plaster Walls
      How to
      Clean Wallpaper
      How to
      Clean Drywall
      How to
      Stop Efflorescence
      How to
      Get Ink or Dye Off a Painted Wall
      How to
      Remove Hair Dye from a Wall
      Advertisement

      References

      1. ↑ https://www.cleanipedia.com/gb/floor-and-surface-cleaning/how-to-remove-mould-and-mildew-from-walls.html#
      2. ↑ https://extension.umn.edu/moisture-and-mold-indoors/dealing-and-preventing-mold-your-home
      3. ↑ https://letsremovemold.com/top-3-mold-remover-brushes/
      4. ↑ https://www.bobvila.com/articles/mold-on-the-walls/
      5. ↑ https://extension.umn.edu/moisture-and-mold-indoors/dealing-and-preventing-mold-your-home
      6. ↑ https://www.bobvila.com/articles/mold-on-the-walls/
      7. ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
      8. ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
      9. ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
      1. ↑ https://extension.umn.edu/moisture-and-mold-indoors/dealing-and-preventing-mold-your-home
      2. ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
      3. ↑ https://www.bobvila.com/articles/how-to-remove-mold-from-wood/
      4. ↑ https://www.todayshomeowner.com/video/how-to-choose-the-right-sandpaper-grit-for-the-job/
      5. ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
      6. ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
      7. ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
      8. ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
      9. ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
      10. ↑ https://moldpedia.com/remove-mold-wood-drywall-carpet#tiles
      11. ↑ https://www.bobvila.com/articles/mold-on-the-walls/

      About This Article

      Article Summary X

      To get mold off a painted or finished wall, combine 3 parts water and 1 part bleach in a large bucket or basin. Dip a scrub brush with hard bristles in the bleach solution and use it to scrub the wall in circular motions, using firm pressure. Once you’ve cleaned the area, allow the bleach solution to air dry on the wall. It’s best not to wipe the bleach away so that it has more time to work, but you can soak up excess water and bleach with a clean, dry towel if the area is sopping wet. If you still see mold stains on the wall after the bleach dries, repeat the process until the wall looks clean. For more expert advice, like how to get mold off of wooden walls with soap and water, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 48,933 times.

      Did this article help you?

      Advertisement