PDF download Download Article
Tackle rust, mold, and mineral build-up in this often-forgotten spot
PDF download Download Article

While you might be cleaning your toilet bowl regularly, many people forget about the tank during their cleaning routine. While the water that enters the tank is usually clean and bacteria-free, the metal internal parts can rust and if your bathroom is humid, mold and mildew can collect on the inside walls. To tackle this issue, all you need is vinegar, a bleach-free bathroom cleaner, and a scrubbing brush. We interviewed professional plumber James Schuelke and Cleanzen Cleaning Services to find out how you can empty and clean your toilet tank.

Best Way to Clean a Toilet Tank

Turn off the water valve and flush the toilet to drain the tank. Pour in 2 to 3 gallons (7.6 to 11.4 L) of white distilled vinegar and let it sit for 12 hours to dissolve rust, mold, mildew, and mineral deposits. Flush the toilet until the tank is empty, then spray the walls with a bleach-free disinfectant and scrub.

Section 1 of 3:

Cleaning the inside of Your Toilet Tank

PDF download Download Article
  1. Professional plumber James Schuelke says that the “best way to drain a toilet tank would be to shut off the angle stop, or the valve that's directly below the toilet tank.” Then, open the tank lid and flush the toilet so the water flows from the tank into the bowl.
    • The water valve is located behind the toilet, underneath the tank, and towards the base. Turn it counterclockwise the entire way to cut off the water supply. [1]
    • This will leave a small pool of water at the bottom of the tank, giving you enough space to scrub the sides.
    • If you’d like your toilet tank to be empty while you clean, Schuelke recommends using “a wet shop vac [to] extract the remaining” water.
  2. Pour in enough distilled white vinegar to fill the tank up to the overflow valve (about 1 2 inch (1.3 cm) from the top) and let it sit for up to 12 hours to dissolve mineral deposits, mildew, mold, and rust. For a standard-size tank, you’ll need 2 to 3 gallons (7.6 to 11.4 L) of vinegar.
    • Put on a pair of rubber gloves and make sure the area is well-ventilated before starting.
    • Cleanzen Cleaning Services says that “White vinegar has a strong, acidic property that can tackle rust effectively.”
    • Vinegar is effective against 82% of mold species. [2] If your tank has black mold, get a professional to test it because it might be toxic or spread elsewhere in your home. [3]
    Advertisement
  3. After the vinegar sits for 12 hours, flush the toilet until the tank only has a small amount of water pooled at the bottom. [4] That way, you can scrub the walls with a disinfectant. [5]
    • Optionally, use a scrubbing brush or pumice stone to loosen any mold, mildew, or rust that remains on the walls. [6]
  4. Spray the walls thoroughly with a bathroom cleaner or disinfectant labeled “bleach-free.” Let it sit for 15 minutes. Scrub with a toilet scrub brush, a plastic bristle cleaning brush , or an old toothbrush. Use a cloth or paper towel to wipe down the internal parts of the toilet.
    • As a more natural alternative, mix ½ cup (136 g) baking soda, 1 cup (240 mL) white vinegar, and 2 tablespoons (30 mL) of dish soap. Pour the mixture into the tank and use it to scrub the walls of the tank. [7]
    • Try to avoid using bleach. Mixing vinegar and bleach can create toxic chlorine gas. [8] Bleach and bleach products can also corrode the internal parts of your toilet. [9]
  5. Turn on the water supply valve under the tank and flush the toilet until the tank is completely drained. Flush 2 to 3 more times to rinse all the vinegar and other cleaning products out of the tank. Place the lid back on the tank, and you’re done!
  6. Advertisement
Section 2 of 3:

How Often to Clean Your Toilet Tank

PDF download Download Article
  1. If your toilet uses “hard water,” or water with more dissolved calcium and magnesium, clean the tank every 3 months. If your bathroom is extra warm and humid, try to clean it once a month to prevent mold. [10]
    • Check for mineral deposits regularly—if you notice mineral build-up before your next bi-yearly cleaning, try to clean every 3 months instead. [11]
    • You can also prevent mold in the future by venting your bathroom with fans or keeping the windows open. [12]
Section 3 of 3:

Maintaining Your Toilet Tank

PDF download Download Article
  1. To keep your tank clean for longer and to further eliminate mold and other issues, try adding 1 to 2 cups (240 to 470 mL) of white distilled vinegar to the tank. Let it soak overnight, then flush the toilet the next morning. [13]
    • Alternatively, add 4 to 6 cups (950 to 1,420 mL) of vinegar, let it sit for about an hour, and flush several times. Repeat 1 to 2 times between regular cleanings. [14]
  2. Many tank tablets, commercial toilet bowl cleaners, and tank cleaners include bleach and other chemicals that can corrode and damage the parts inside your tank. If you do use these products, look for ones that don’t have bleach and are labeled “natural” or “chemical-free.” [15]
    • Many toilet manufacturers also void their warranties if you use in-tank cleaners, but using vinegar, bleach-free disinfectants, and elbow grease is usually safe.
  3. Advertisement

Community Q&A

Search
Add New Question
  • Question
    We have a septic system and cannot use strong chemicals. What are my options?
    L.B
    Community Answer
    Vinegar is septic safe, and a moderate amount of bleach is safe for your system, too. The bleach will degrade into harmless salty water.
  • Question
    How do I rid the toilet bowl of hard water stains when the water just sits in the bowl before flushing?
    ScottB28
    Community Answer
    If the water is going to sit in the bowl for a long time between flushes, adding some vinegar to the water will help. Follow the cleaning guide and then add vinegar to the water when the toilet is expected to be unused for a long time.
Ask a Question
      Advertisement

      Video

      Tips

      • If you have repairs to make to your toilet, do them while the water is turned off and the tank is empty before you spray your bleach-free cleaning solution. [16]
      • While cleaning, wipe down the toilet flapper with a damp cloth or rag to make sure your toilet seals and flushes properly. [17]
      • Make sure to flush the toilet at least once a week to keep the water moving in the tank, preventing mineral build-up, rust, and mold issues. [18]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      About This Article

      Thanks to all authors for creating a page that has been read 163,700 times.

      Reader Success Stories

      • Siva Sundaram

        Nov 27, 2019

        "It helped in the use of particular agents and method of cleaning for better life of the toilet tank."
      Share your story

      Did this article help you?

      Advertisement