PDF download Download Article PDF download Download Article

A Vicks humidifier can be a godsend when you’ve got the flu, a nasty cold, or sinus issues. They use special filters to remove contaminants from the air and contaminants from your water can build up into scaly deposits over time. Fortunately, cleaning your Vicks Cool Mist humidifier is actually really easy. Rinse the humidifier daily to keep it lasting longer, and do a nice deep-cleaning at least once a week to remove any scale deposits. We’ll even show you how to make a DIY vinegar cleaning solution to disinfect the water tank and tray monthly to prevent bacteria build up.

Descaling & Disinfecting the Humidifier

To descale, fill the tank with 1 cup (237 mL) of distilled white vinegar. Place the tank on the base so the vinegar fills the reservoir. Wait 30 minutes, pour out the vinegar, and wipe away loosened deposits. Rinse with water. To disinfect, repeat this process with 1 gal (3.8 L) of water and 1 tsp (5 mL) of bleach.

Method 1
Method 1 of 3:

Rinsing the Humidifier Daily

PDF download Download Article
  1. Make sure the humidifier is turned off and unplug it. Set it on a clean, flat surface like a table or a countertop. Make sure you have enough space to clean the humidifier. [1]
    • Make sure the surface is flat and even to keep water from running off the sides.
  2. Both pieces are attached to the base of the humidifier. Take off the water tank first, which will allow you to slide out the tray. Be careful not to damage the filter when you remove the tank and tray. [2]
    • If your humidifier doesn’t have a tank, remove the top housing and lay it upside down on a flat surface. Make sure you don’t rest the housing on the water tube or you could damage it.
    Advertisement
  3. Unscrew the cap on the water tank and empty the water into a sink. Flush the container with clean, warm water. Shake the container to slosh the water around inside of it. [3]
    • Use warm, but not hot water to flush the tank. Hot water could melt or warp the plastic.
    • If your humidifier doesn’t have a water tank, empty the base of any remaining water and wipe it down with a clean rag or paper towel to dry it off.
  4. Take a clean cloth or a few paper towels to the exterior of the water tank and any other areas that may have gotten water on it. If any other parts of the humidifier are dusty or dirty, use the damp cloth or paper towel to wipe them down. [4]

    Safety Warning: Be sure to remove all of the water from the tank or it could cause an electric shock.

  5. Advertisement
Method 2
Method 2 of 3:

Deep-Cleaning the Humidifier Weekly

PDF download Download Article
  1. Remove the water tank, unscrew the cap, and empty any water inside of it. Then add some warm water to the tank and shake it around to flush it. Set the tank off to the side until you’re finished cleaning the humidifier. [5]
    • Place the tank upside-down to allow any additional water to run out of it.
  2. With the tank still removed, turn on the humidifier. When the wicking filter is completely dry, turn off the humidifier and unplug it.
    • It should take about 10-15 minutes for the filter to dry out.
    • If your humidifier doesn’t have a removable tank, turn off the humidifier and unplug it. Then remove the top housing, and dump out any water left inside. Wipe it down dry with a cloth or a paper towel.
  3. Gently pull the filter straight up to remove it without tearing it. The filter should be completely dry before you try to remove it. If it isn’t dry, wait another 5 minutes. [6]

    Tip: Some humidifiers use cartridge filters, which need to be replaced instead of cleaned.

  4. Slide out the water tray and set it aside. Pour the undiluted vinegar into the tray and allow it to sit for 30 minutes. The vinegar will loosen any scale deposits that may have built up over time. [7]
    • For humidifiers that don’t have a removable tray, use a sponge soaked in vinegar and wipe the inside of the base. Then rinse it out with warm water.
    • Use distilled white vinegar.
  5. After 30 minutes, take a sponge and scrub off any scale from the water tray. If the scale isn’t coming off, soak the tray in vinegar for another 30 minutes then scrub it again. [8]
    • Use a sponge that has an abrasive side to scrub the tray.
  6. Once you’ve scrubbed off the scale deposits, rinse off the water tray and the pickup tube that transfers the water from the tank. Use warm water that isn’t too hot. Dry off the tray, tank, and tube with a clean cloth or paper towels when you’re finished. [9]
    • Make sure you rinse the inside and outside of the pickup tube.
  7. Advertisement
Method 3
Method 3 of 3:

Disinfecting the Water Reservoir Monthly

PDF download Download Article
  1. Mix together 1 teaspoon (4.9 mL) of bleach and 1 gallon (3.8 L) of warm water. Allow the water tank to soak for 20 minutes. Stir the water occasionally by gently shaking the container every few minutes to make sure the bleach reaches every part of the tank. [10]
    • If you don’t have a removable water tank, add the bleach and water mixture to the water reservoir in the base.
  2. Remove the pickup tube and carefully pour out the bleach so it doesn’t get on any other parts of the humidifier. Pour the bleach into a sink or another safe disposal area. [11]
    • If any of the bleach water splashes onto the humidifier, dry it off immediately with a cloth or paper towel.

    Safety Precaution: Be careful not to breathe in the fumes from the bleach.

  3. It’s important that you flush away all of the bleach from the humidifier. Use warm water to rinse the water tank repeatedly until you no longer smell any bleach at all. Make sure you flush the pickup tube as well. [12]
    • Flush out the water reservoir in the base if your model doesn’t have a removable tank.
  4. Use a clean, dry cloth or paper towels to dry any surface that got wet. It’s important that the exterior of the humidifier is completely dry before you plug it in and use it. [13]
    • Let the humidifier air-dry for about 3-4 hours to make sure it’s fully dry.
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What can I use to clean my Vicks humidifier?
    Victor Belavus
    Air Conditioning Specialist
    Victor Belavus is an Air Conditioning Specialist and the Owner of 212 HVAC, an air condition repair and installation company based in Brooklyn, New York. In addition to HVAC and air conditioning units, Victor also specializes in furnace repair and air duct cleaning. He has over 10 years of experience working with HVAC systems.
    Air Conditioning Specialist
    Expert Answer
    You can use a combination of distilled white vinegar and water, or a mixture of citric acid and water to clean your humidifier. Soak the filter and tank in your cleaning solution for 15-60 minutes. Then, rinse the filter and tank with clean water before reassembling your humidifier.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      Things You’ll Need

      • Dry cloth or paper towels
      • White vinegar
      • Bleach
      • Sponge with scrubbing surface

      About This Article

      Thanks to all authors for creating a page that has been read 97,043 times.

      Did this article help you?

      Advertisement