How to Crack Open a Geode

Co-authored by Sam Lagor, MSc

Last Updated: November 7, 2024 Approved

If you've discovered a geode (a rounded rock formation with crystals or banding inside), you'll want to crack it open as safely and neatly as possible. Every geode is unique, and could hold anything from clear, pure quartz crystals to rich purple amethyst crystals, or perhaps agate, chalcedony, or minerals like dolomite. ^{[1]
X
Research source} Fortunately, there's more than one way to crack open a geode...

Steps

Download Article

1
Put on safety glasses before attempting to open a geode. ^{[2]
X
Research source}
- It may help to wear a pair of gloves, too.

Method 1

Method 1 of 5:

Chisel Method

Download Article

Take a rock or masonry flat chisel , hold at top center of rock, then strike with a hand-held sledge hammer . Tap lightly, as to score the rock only. ^{[3]
X
Research source}
Patience is key; if the geode is hollow, it will probably take a few minutes of gentle scoring to open it, but if the geode is solid, it'll take longer. ^{[4]
X
Research source}

Method 2

Method 2 of 5:

Sledgehammer Method

Download Article

2
Take a small Sledgehammer or a rock hammer (preferably not a construction hammer, such as a claw hammer) and strike the top center of the geode. A couple of strikes might be required to fully crack open this rock. This is likely to result in the geode fragmenting into more than two pieces, but it is the most suitable method for kids, though not recommended for particularly valuable/rare geodes. ^{[5]
X
Research source}
- Rock hammers are made with reinforced steel, making them stronger than your typical carpenter hammer.

Method 3

Method 3 of 5:

Striking Method

Download Article

This only really works if you control the striking rock in the palm of your hand. Only use this method on small, golf-ball-sized geodes.

Method 4

Method 4 of 5:

Cast Iron Pipe Snap Cutter

Download Article

This common plumber's tool can aid you in splitting a geode symmetrically, that is, into two equal halves. Wrap the tool's bicycle-type chain around your geode. ^{[6]
X
Research source}
It should crack smoothly all around. (This is the least destructive method that displays a geode in a natural form.)

Method 5

Method 5 of 5:

Diamond-Blade Saw Method

Download Article

(Note that oil can damage the interior of some geodes.)

Community Q&A

Search

Add New Question

Question

Why should I use a sledgehammer?

Community Answer

It is not recommended to use a sledgehammer as it will smash the geode into many pieces and can destroy the crystals/formations inside. Hammer and chisel is a much better method.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 24 Helpful 102
Question

How are geodes made?

Community Answer

Over many years, mineral water seeps into the rock. As the water makes its way through the rock, the minerals get sifted out, and are left behind in the rock in a crystalline formation according to the type of minerals in the water.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 14 Helpful 89
Question

Do I have to put it in a sock when breaking it open?

Community Answer

No, but the method provides a good measure of safety by preventing the pieces from flying all over the place.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 14 Helpful 58

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Geodes that rattle when shaken may be hollow and contain free floating fully-terminated crystals, such as quartz.

Thanks
Helpful 1 Not Helpful 0
Place geode on a larger rock at ground-level, or upon sand (never wood, like a picnic table or deck floor) to promote the best results of your tool striking your geode safely and cleanly.

Thanks
Helpful 1 Not Helpful 0
Sometimes smaller geodes may be solid inside, yet still attractive. Even filled geodes can be chock-full of beautifully banded agates.

Thanks
Helpful 1 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Always be careful and follow general safety procedures for rockhounding and tool use. Be mindful of any folks (or animals) observing you cracking open your geode, as rock shards you create may fly towards the onlookers, and injure them. With safety in mind, please enjoy your geodes.

Thanks
Helpful 5 Not Helpful 1

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

Log in

How to Crack Open a Geode

Steps

Chisel Method

Sledgehammer Method

Striking Method

Cast Iron Pipe Snap Cutter

Diamond-Blade Saw Method

Community Q&A

Tips

Warnings

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories