How to Cut Sheet Metal

PDF download Download Article
PDF download Download Article

Sheet metal comes in a variety of thicknesses and strengths. Depending on the pattern and type of sheet metal, you can use several different kinds of equipment to make a cut. You can use an electric saw for simple lines, or you can try tin snips, dremels, or metal nibblers for complex designs with curved lines. Once you've chosen the right tools, you're just an afternoon of hard work away from creating clean cuts in sheet metal!

Method 1
Method 1 of 4:

Cutting Straight Lines with an Electric Saw

PDF download Download Article
  1. Metal is difficult for saws to cut, and rubbing wax along the blade helps prolong its sharpness. Apply a thin layer of paraffin or saw wax to the blade, just enough to cover the surface, before making any cuts in the metal. [1]
    • Put on a pair of work gloves before you wax the saw to protect your hands.
    • Choose a saw with a tooth number of at least 24tip (teeth per inch) to ensure even cuts in the metal. [2]
  2. Apply masking tape to both sides of the sheet metal directly over the line you want to make. This ensures a cleaner cut and prevents metal chips from scratching the sheet while you cut. Clamp the sheet metal against your desk to hold it in place while you work. [3]
    • Electric saws are best for making straight cuts only. If you need to make a curved cut, try tin snips, a dremel, or a metal nibbler instead.
    Advertisement
  3. Position the saw blade against the metal's edge so the teeth point forward. If you're not sure where the teeth are pointed, run your finger carefully against the blade. The teeth should lightly touch or "grip" your finger if they point in the right direction.
    • If the teeth are dull and you can't feel them no matter how you touch the blade, replace the blade first.
    • Before making the first cut, put on a pair of safety goggles, a respirator, and earplugs for protection.
  4. Grip the saw with both hands and push the blade forward with your dominant hand. Push slowly, especially if you're unfamiliar with electric saws, to prevent injuries or an uneven cut. [4]
    • Do not use your non-dominant hand to push. It should only be used to steady the blade and guide its direction.
  5. Push your saw through the blade until you reach the end of the line. After finishing the first stroke, pull the saw back with your dominant hand and remove it from the metal sheet.
    • One stroke should be enough to cut through the metal. If not, repeat the process by following the first cut you made with your saw.
    • Don't put any pressure on the saw during the return stroke, as this can wear out the blade.
    6. Advertisement
Method 2
Method 2 of 4:

Using Tin Snips for Thin Sheets

PDF download Download Article
  1. Most tin snip manufacturers color-code their products based on the direction that you need to cut. Depending on your project, prepare 1 or several of the following tin snips: [5]
    • Red-handled snips: Cutting left
    • Green-handled snips: Cutting right
    • Yellow-handled snips: Cutting straight
  2. Clamp the sheet metal in place on your work table to hold it in place while you work. Align the snips with the line you want to cut, with the upper blade of the tin snips touching the sheet metal. [6]
    • Tin snips are primarily used for cutting thin sheet metal like tin, aluminum, brass, and thin-gauge stainless steel. [7]
    • Before cutting, put on a pair of safety goggles and work gloves to prevent injuries.
  3. Once your tin snips make contact with the sheet metal, squeeze the handles with your fingers to make the first cut. Work slowly and inspect the metal afterward for an even cut before making subsequent cuts in the metal. [8]
  4. Hold your tin snips level against the sheet metal and keep making cuts in its surface until you reach the end of the prospective cut's line. If you need to change directions, switch your pair of tin snips for the corresponding direction. [9]
    • If you need to switch from straight to left, for example, swap your yellow-handled snips for a pair of red-handled snips.
    5. Advertisement
Method 3
Method 3 of 4:

Making Detailed Cuts with Dremels

PDF download Download Article
  1. Because dremel blades are small and easy to maneuver, they're best at cutting small or detailed incisions in metal. If you want to make larger cuts, however, you may be better off with tin snips or an electric saw—dremels generally take too much time for big cuts. [10]
    • Dremels are also great for making both straight and curved cuts.
  2. Secure the metal to your table with clamps to keep it from moving around. Turn your dremel on to a medium or high speed so it has enough power to cut through the metal. [11]
    • Put on safety goggles, respirator, and earplugs before handling the dremel to protect your eyes, ears, and lungs.
  3. Hold the blade down on the sheet metal's surface at the edge of the intended cut. Using firm pressure, dig into the surface until you reach the ideal depth of your cut, then move forward along the line of your intended incision. [12]
  4. Move your blade along the intended line until you reach the end end of your cut. Use slow, steady pressure to prevent accidents and keep your lines as precise as possible. [13]
    • If you notice any light smoking coming from the dremel, turn it off and, after contacting the manufacturers, turn the machine to a lower setting. Most of the time, smoking indicates that the pressure setting is too high.
    5. Advertisement
Method 4
Method 4 of 4:

Trying a Metal Nibbler for Small Cuts

PDF download Download Article
  1. Nibblers can allow a better range of control over the cut but with a thinner line width than other methods. Because it is a more methodical tool than some methods, it is also best for smaller cuts. [14]
    • Metal nibblers are the best option for making curved cuts because of its increased range of control.
    • Although you can use a metal nibbler for long cuts in sheet metal, it takes more time and is generally less convenient. [15]
  2. Use clamps to secure the sheet metal on your work bench. Align the nibbler so the blade is level and the middle just touches the edge of the line you want to cut.
    • Put on a pair of safety goggles and ear plugs before turning on the metal nibbler to protect your eyes and ears.
  3. Switch the nibbler on and push the nibbler slowly through the line. Nibblers generally cut more slowly than other methods, so avoid putting too much pressure on the instrument as you work.
    • Keep the blade upright while you cut, and avoid leaning it at an angle.
    • In general, nibblers may take several minutes longer than other methods to cut metal.
  4. Continue putting pressure on the nibbler as you push through the metal until you reach the end of the line. If you need to change direction, do so slowly to avoid making an accidental cut in the wrong direction.
    • If you've never worked with a metal nibbler before, you can also cut the line in short spurts and turn it off between sections in the cut.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What’s the easiest way to cut sheet metal?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    A circular saw with a metal-cutting diamond blade is a great tool for cutting sheet metal. Just make sure to wear protective clothing and eyewear, since this process will cause sparks and metal shavings to fly!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 4
  • Question
    How can I cut metal without tools?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    You will need some sort of tool to cut metal, but it doesn’t necessarily need to be a power tool. Tin snips, a hack saw, or a hack chisel may do the trick.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 2
  • Question
    How do you cut hardened steel?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    You can cut hardened steel with a fine-toothed hacksaw or a specialized metal saw. You can also heat the metal to white hot with a propane torch and then cut through it with a hammer and chisel. However, this method may damage the metal.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 4
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Run a metal file along the finished cut's edges to get rid of any rough areas or metal chips.
        Thanks
        Helpful 2 Not Helpful 2
      • Draw the line on the metal object in marker first to give yourself a pattern to follow and ensure an even cut.
        Thanks
        Helpful 2 Not Helpful 3
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not cut sheet metal without securing it in place with clamps. If you cut unsecured sheet metal, you're more likely to make an uneven cut.
        Thanks
        Helpful 4 Not Helpful 0
      • Always wear safety goggles and other protection (like work gloves, respirators, or earplugs) while handling cutting equipment.
        Thanks
        Helpful 4 Not Helpful 2
      Advertisement

      You Might Also Like

      How to
      Use a Ratchet Strap
      How to
      Use a Light Timer
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Make a Smokeless Fire Pit
      How to
      Fix a Leaky Sink Trap
      How to
      Make a Drone
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Paint on Plastic
      How to
      Clean a USB C Charging Port
      How to
      Adjust a Lazy Susan
      How to
      Adjust a Furnace Gas Valve
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about cutting metal sheets, check out our in-depth interview with Christopher Thomas .

      References

      1. ↑ https://makezine.com/2015/06/24/skill-builder-working-with-sheet-metal/
      2. ↑ http://www.ultimatehandyman.co.uk/how-to/metalworking/cutting-metal
      3. ↑ https://makezine.com/2015/06/24/skill-builder-working-with-sheet-metal/
      4. ↑ https://www.familyhandyman.com/tools/woodworking-tools/how-to-use-a-jigsaw/view-all/
      5. ↑ https://makezine.com/2015/06/24/skill-builder-working-with-sheet-metal/
      6. ↑ https://www.familyhandyman.com/tools/how-to-use-tin-snips-to-cut-sheet-metal/view-all/
      7. ↑ http://www.ultimatehandyman.co.uk/how-to/metalworking/cutting-metal
      8. ↑ https://www.metalroofingsource.com/how-to-cut-sheet-metal/
      9. ↑ https://www.metalroofingsource.com/how-to-cut-sheet-metal/
      1. ↑ https://www.youtube.com/watch?v=CGFnTMltHMQ&feature=youtu.be&t=16
      2. ↑ https://www.youtube.com/watch?v=CGFnTMltHMQ&feature=youtu.be&t=211
      3. ↑ https://www.youtube.com/watch?v=stdL-tNtedw&feature=youtu.be&t=89
      4. ↑ https://www.youtube.com/watch?v=hgaIWAhcwR4&feature=youtu.be&t=204
      5. ↑ https://makezine.com/2015/06/24/skill-builder-working-with-sheet-metal/
      6. ↑ http://thelibraryofmanufacturing.com/sheetmetal_cutting.html

      About This Article

      Article Summary X

      The method you choose to cut sheet metal depends on the thickness of the metal and the type of cut you plan to make. To cut straight lines, use an electric saw. Start by taping both sides of the sheet metal directly over the line you want to cut and clamp the metal to a work station so it doesn’t move. Then, grip the saw with both hands and push the blade through the metal to cut it. For thin sheets of metal, you can use tin snips to cut through it. To make detailed cuts in sheet metal, use a Dremel blade. Clamp the sheet metal to a work table and press the Dremel blade against it. Move the blade along the intended line until you reach the end of your cut. To learn how to use a metal nibbler for small cuts, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 179,640 times.

      Did this article help you?

      Advertisement