PDF download Download Article PDF download Download Article

Dishwashers are a part of our everyday life. We count on them to clean our dishes. There are many ways a dishwasher can malfunction. Sometimes, one broken component can cause several problems. Knowing various symptoms can help you know how to diagnose dishwasher problems.

Get Product Support Solve Any Problem

wH
Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!
*
*
Method 1
Method 1 of 8:

Dishwasher does not Work at All

PDF download Download Article
  1. You should also make sure the dishwasher is firmly plugged into the outlet. [1]
  2. The electrical cord should be replaced if you find any damage.
    Advertisement
  3. In this case, inspect the door latch to ensure it is working properly.
  4. You should also test the timer, motor and motor relay inside your dishwasher. [2]
  5. Advertisement
Method 2
Method 2 of 8:

Motor Whines but Dishwasher does not Start

PDF download Download Article
Method 3
Method 3 of 8:

Dishwasher does not Fill or Drains During Filling

PDF download Download Article
  1. [4]
  2. Check the door latch, float assembly, inlet and drain valves. Check the screens of valves for blockages. [5]
  3. You should do the same for the inlet valve if visual inspection does not show anything.
  4. There are two parts to the drain valve, the gate arm and the solenoid.
    • Grasp the valve arm and try to move it up and down. The arm should move smoothly. If it is difficult to move, ensure the springs of the arm are not damaged or missing.
    • If the arm is undamaged but doesn't move properly, you will need to replace the solenoid. Remove the connecting wires with needle-nosed pliers and label them. Use a screwdriver to take out the screws and change the bad solenoid.
  5. Advertisement
Method 4
Method 4 of 8:

Water does not Drain

PDF download Download Article
  1. Other damage should also be visible. You should also check the motor and pump for any obstructions. [6]
  2. Test the resistance of the drain valve and the continuity of the timer motor. [7]
  3. Advertisement
Method 5
Method 5 of 8:

Water or Soap is Leaking Out

PDF download Download Article
  1. The detergent must be rated for dishwashers. Ensure the washer is not overfilling with water. [8]
  2. [9] You should also check the seals around the tub, float, heater and diffuser. [10]
  3. [11]
  4. Advertisement
Method 6
Method 6 of 8:

Noisy Dishwasher

PDF download Download Article
  1. The inlet valve may need to be tested as well.
  2. You should also check the fan motor and blades for damage. [12]
  3. Advertisement
Method 8
Method 8 of 8:

Dishes are not Clean

PDF download Download Article
  1. Clean the fine particle filter and water inlet filters. [13]
  2. Make sure none of the valves or hoses have blockages. [14]
    • You should also inspect the selector switch, timer motor and heating element for the correct continuity. Test the bimetal terminal assembly last.
    • Check the spray arm outlet holes to see if they are full of debris (e.g. plastic container labels etc). You may need to remove these and use a garden hose and/or a high pressure washer to force the debris out of them. Also check that your debris filters at the bottom of the unit are seated properly. Some may warp due to a heating coil close by. You may need to replace any that have warped. [15]
  3. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you check if your dishwasher is clogged?
    Gevorg Grigorian
    Appliance Repair Expert
    Gevorg Grigorian is an Appliance Repair Specialist and the Owner of G and R Appliance Repair in Los Angeles, California. With over 12 years of experience, Gevorg specializes in residential and commercial appliance repairs as well as heating, ventilation, and air conditioning (HVAC) services. Gevorg holds a BS in Business Administration and Management from California State University-Northridge.
    Appliance Repair Expert
    Expert Answer
    Remove the filter and rinse it under the sink to make sure there's no build up or anything like that there. Before you put the filter back in, shine a flashlight into the hole where the filter was, and make sure there's no debris in there. Sometimes obstructing objects can get inside there, including broken glass and seeds.
  • Question
    Why is my dishwasher leaking?
    Gevorg Grigorian
    Appliance Repair Expert
    Gevorg Grigorian is an Appliance Repair Specialist and the Owner of G and R Appliance Repair in Los Angeles, California. With over 12 years of experience, Gevorg specializes in residential and commercial appliance repairs as well as heating, ventilation, and air conditioning (HVAC) services. Gevorg holds a BS in Business Administration and Management from California State University-Northridge.
    Appliance Repair Expert
    Expert Answer
    Dishwashers tend to leak from the left or right side of the door or even simultaneously on both sides due to a worn out gasket. It's also possible that the rubber tubing and hoses of the dishwasher have been punctured by a piece of glass or rodents chewing the tubing.
Ask a Question
      Advertisement

      Tips

      • You will need screwdrivers and pliers to remove panels and connectors. You should also have electrical testing devices such as a multimeter or continuity reader.
      • Broken or malfunctioning parts can cause various problems. Testing multiple parts for one or two symptoms is not unusual. This article is intended to help you narrow down possible diagnoses.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always turn off the power to the device before testing components. Call a qualified repair technician if you are unsure on how to test them correctly.
      • Wear shoes with rubber soles and avoid working in wet areas. You should also use insulated tools while working on electrical devices. Proper shoes and tools can help prevent electrocution.
      Advertisement

      Things You'll Need

      • Basic Tool Kit
      • Continuity reader or multimeter tool

      About This Article

      Thanks to all authors for creating a page that has been read 257,807 times.

      Did this article help you?

      Advertisement