Download Article
Protect your home, yourself, and the ecosystem by following these muriatic acid guidelines
Download Article
If you have leftover muriatic acid, it's important to get rid of it in a way that won't harm your plumbing, yourself, or the environment. While this strong cleaning product is useful for removing stains and scale buildup from brick, tile, and concrete, it’s also highly corrosive and dangerous. This article covers 3 step-by-step methods for disposing of it safely and responsibly, plus 6 helpful suggestions for using up leftover muriatic acid.
Things You Should Know
- Dilute muriatic acid by pouring ¼ cup (59.15 mL) into 2 gallons (7.6 L) of water; then pour it down the drain if city regulations allow it.
- Neutralize 1 gallon (3.8 L) of acid by mixing in 5.5 pounds (2.49 kg) of baking soda, then pour it down the drain.
- Use leftover muriatic acid to clean brick, concrete, toilets, and tile. Or, use it to balance your pool’s pH.
- Give leftover muriatic acid to a local hazardous waste facility; they will dispose of it for you. Don't pour muriatic acid outside or down a storm drain.
Steps
Section 2 of 6:
Diluting Muriatic Acid
-
Fill an acid-resistant bucket with 2 gallons (7.6 L) of water. Make sure the bucket is made of HDPE, LDPE, or PTFE plastic (muriatic acid will melt ABS and PP plastic). [2] X Research source
- To determine the plastic type , flip over your bucket and check the bottom. It will likely have the abbreviation below the recycle symbol.
-
Put on personal protective gear. This includes safety goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. Wear a respirator and/or work in a well-ventilated area. [3] X Research source
- Muriatic acid is very corrosive and will burn your skin. The fumes can cause respiratory irritation. Always wear the proper safety gear while using muriatic acid.
-
Carefully pour ¼ cup (59.15 mL) of acid into the water. Always add acid to water; never add water to acid. If you get it backward, an explosive exothermic reaction will occur! [4] X Research source
- Pouring undiluted muriatic acid down the drain can ruin your pipes.
-
Slowly pour the solution down the sink. Flush the solution out of your pipes by running the water for several minutes. [5] X Research source
- Review your city's wastewater regulations to make sure they don't prohibit disposing of diluted muriatic acid in this way. Search for “waste management,” “sewer,” or “wastewater” on your city’s website for more information. [6] X Research source
- Don’t use this method if you have a private septic tank, as it destroys helpful bacteria. Only use it if you’re connected to the city’s sewage system. [7] X Research source
Advertisement
Section 3 of 6:
Neutralizing Muriatic Acid
-
Mix 1 part baking soda to 10 parts water. This equals about 5 ½ cups (1.21 kg) of baking soda per 3.5 gallons (13 L) of water. Do this in a large, acid-resistant bucket and stir with a wooden stick.
- Only use a bucket made of HDPE, LDPE, or PTFE plastic. ABS and PP plastics can’t hold corrosive acids. [8] X Research source
- Identify the plastic type of your container by examining the bottom for the abbreviation above the recycling symbol.
-
Wear safety gear. Goggles, acid-resistant gloves , a long-sleeved shirt, and long pants will protect you from splashes. Put on a respirator and/or work in a well-ventilated area. [9] X Research source
-
Slowly add the muriatic acid. Wait about 5 minutes for the solution to stop fizzing. Then, add another cup (220.8 g) of baking soda. If it fizzes, wait for it to stop, then add additional baking soda. [10] X Research source
-
Keep adding baking soda until no fizzing occurs. Once the fizzing stops, the solution is neutralized. [11] X Research source
-
Pour the solution down the drain. If you use a city sewer system, the neutralized mixture is safe to pour down the drain. [12] X Research source Don’t use this method if you have a private septic tank, as it destroys helpful bacteria. [13] X Research source
- Only use this method to get rid small amounts of muriatic acid, as it requires about 5.5 pounds (2.49 kg) of baking soda for every 1 gallon (3.8 L) of acid. [14] X Research source
Advertisement
Section 4 of 6:
Using Up Leftover Muriatic Acid
-
Remove build-up on brick. Put on your safety gear, then fill an acid-resistant bucket with 10 parts water before adding 1 part muriatic acid. Apply the solution to the brick and allow it to sit for a few minutes before scrubbing with a stiff nylon brush . Then rinse the surface with a 1:16 solution of ammonia to water. [15] X Research source
- Appropriate safety gear includes goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. [16] X Research source
-
Balance your pool’s pH. If the water has too much chlorine, you can lower the pH with muriatic acid. Put on your safety gear, then follow the instructions on the container to determine how much to add. Slowly pour it over a running return jet, then test the pH after 4 hours.
- When working with muriatic acid, wear goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. [17] X Research source
- Maintain a pH level between 7.2 and 7.8.
- After adding the muriatic acid, wait at least 4 hours before swimming.
-
Eliminate concrete stains. Start by rinsing off the concrete with a hose. Put on your safety gear, then create a 15:1 mixture of water to muriatic acid in an acid-resistant bucket . Apply to the stain using a sturdy scrub brush, then rinse the concrete using a pressure washer or hose. [18] X Research source
- Protect yourself from splashes by wearing goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. [19] X Research source
-
Get rid of limescale in toilets. Fill an acid-resistant bucket with 10 parts water, then carefully add 1 part muriatic acid while wearing the appropriate safety gear. [20] X Research source Pour ½ cup (118.29 mL) into the toilet bowl, then allow it to sit for up to 3 hours. Scrub with a toilet brush and flush.
- Wear goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. Put on a respirator and/or work in a well-ventilated area. [21] X Research source
-
Clean your empty swimming pool. Put on protective gear and pour 1 gallon (3.8 liters) of water into an acid-resistant watering can , then add 1 gallon (3.8 liters) of water. Wet the pool walls with a hose, then pour the acid solution on a 10-foot wide (3.05 m) section at a time. After 30 seconds, scrub with a brush. [22] X Research source Acid-washing your pool removes stubborn scale buildup.
- Proper protective gear includes goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. [23] X Research source
- Use this method on a swimming pool with concrete walls; it isn't suitable for vinyl pool liners.
-
Remove soap scum from glazed and ceramic tile. After putting on safety gear, fill an acid-resistant bucket with 5 parts water, then slowly add 1 part muriatic acid. Use a nylon scouring pad to apply the solution, scrubbing the tiles in a circular motion. Rinse with cold water. [24] X Research source
- Protect yourself by wearing goggles, acid-resistant gloves , a long-sleeved shirt, and long pants. Put on a respirator and/or work in a well-ventilated area. [25] X Research source
- Muriatic acid will damage marble, limestone, travertine, and onyx tile. [26] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- When using muriatic acid, wear acid-resistant gloves , a long-sleeved shirt, long pants, and safety goggles. Work in a well-ventilated area, and/or wear a respirator . [31] X Research sourceThanks
- Don't combine other cleaning products with muriatic acid; it can produce deadly chlorine gas. [32] X Research sourceThanks
- Make the muriatic acid solution next to a water source in case of accidental splashes. [33] X Research source If you spill it on yourself, remove any contaminated clothing and immediately rinse your skin, then seek medical attention. [34] X Research sourceThanks
-
Thanks
- Only use an HDPE, LDPE, or PTFE plastic container when making a muriatic acid solution. [36] X Research sourceThanks
Advertisement
References
- ↑ https://sciencing.com/dispose-methanol-8699726.html
- ↑ https://yardandgardenguru.com/how-to-dispose-of-muriatic-acid/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.bobvila.com/articles/muriatic-acid/
- ↑ https://sciencing.com/dispose-hydrochloric-acid-8419934.html
- ↑ https://sciencing.com/dispose-hydrochloric-acid-8419934.html
- ↑ https://sciencing.com/dispose-hydrochloric-acid-8419934.html
- ↑ https://yardandgardenguru.com/how-to-dispose-of-muriatic-acid/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://yardandgardenguru.com/how-to-dispose-of-muriatic-acid/
- ↑ https://yardandgardenguru.com/how-to-dispose-of-muriatic-acid/
- ↑ https://www.unodc.org/pdf/publications/st-nar-36.pdf
- ↑ https://sciencing.com/dispose-hydrochloric-acid-8419934.html
- ↑ https://yardandgardenguru.com/how-to-dispose-of-muriatic-acid/
- ↑ https://www.bobvila.com/articles/muriatic-acid/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://youtu.be/mHvTqW5ZKGs?t=25
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.popularmechanics.com/home/a34285564/how-to-safely-use-muriatic-acid/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.poolspanews.com/how-to/maintenance/scale-tales_o
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://todayshomeowner.com/video/how-to-clean-tile-with-muriatic-acid/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.rocktopsfabrication.com/wp-content/uploads/2016/04/care-maint.pdf
- ↑ https://sciencing.com/how-to-neutralize-an-acid-12524106.html
- ↑ https://sciencing.com/dispose-methanol-8699726.html
- ↑ https://sciencing.com/dispose-methanol-8699726.html
- ↑ https://www.sunnysidecorp.com/pdfs/SDS_71032.pdf
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.nedt.org/muriatic-acid-what-it-is-and-why-its-a-cleaning-product/
- ↑ https://www.bobvila.com/articles/muriatic-acid/
- ↑ https://www.sunnysidecorp.com/pdfs/SDS_71032.pdf
- ↑ https://www.bobvila.com/articles/muriatic-acid/
- ↑ https://yardandgardenguru.com/how-to-dispose-of-muriatic-acid/
About This Article
Thanks to all authors for creating a page that has been read 38,833 times.
Advertisement