How to Hang Things on Drywall

PDF download Download Article
PDF download Download Article

Drywall is thin and easier to damage than other types of wall materials, so it is important to use the right hardware when hanging items from the wall. If at all possible, secure heavy objects to a stud . If that is not a possibility, and you must hang things directly on the drywall, choose a method that is appropriate for the weight of your item. Adhesive hooks and press-in wire hooks are great for lightweight objects, while threaded anchors work well for medium-weight objects. Use a molly bolt for the heaviest items.

Method 1
Method 1 of 4:

Using Adhesive Hooks

PDF download Download Article
  1. These hooks have adhesive backings that stick to walls, so you don’t have to put a hole in the wall. Weigh the object first so you can pick a hook that will properly support it. [1]
    • Adhesive hooks come in various sizes and should say how many pounds they will hold. The largest of these hooks hold 8 pounds (3.6 kg) and the smallest are rated for only 1 pound (0.45 kg) of weight.
    • For objects that are slightly heavier than your hooks are meant to hold, use 2 hooks.
  2. Use a clean rag or paper towel and some rubbing alcohol to scrub the area of any debris. This will ensure that the adhesive will stick firmly to the wall. [2]
    • If you don’t have rubbing alcohol, you can use warm water mixed with a small amount of dish soap to clean the wall.
    Advertisement
  3. Make a small pencil mark where the center of your hook will be. If you are using 2 hooks, measure the width of your object and divide that number into 3. Make your first mark on the wall at the 1/3 position and the second mark at the 2/3 position. For example, if your picture is 9 inches (23 cm) wide, you’d place 1 hook at 3 inches (7.6 cm) in from the edge, and the second at 6 inches (15 cm). Double check that the 2 marks are in line either using a leveler or by measuring down from the ceiling.
    • If the item you’ll be hanging has a wire hanger on the back, be sure to consider the length of the slack. You can test this by pulling the center of the wire tight toward the top of your object. Measure from the bottom of the object to where the wire catches.
  4. If your hook’s adhesive strip is not already on the back of the hook, peel the liner off 1 side of the strip. Line it up to the back off the hook and press down.
    • Some adhesive hooks come with the adhesive already affixed to the back. Skip this step and move on to the next if that’s the case with the adhesive hook you have.
  5. Remove the paper lining on the back of the hook, line it up straight, and press the hook firmly onto the wall. Hold for 30 seconds and release.
  6. Once the adhesive has dried, hang your items from the hook(s).
    • If your item pulls the adhesive hook off the wall even after you’ve waited, check to make sure you’ve used a hook that is appropriate for the weight of your item.
    7. Advertisement
Method 2
Method 2 of 4:

Utilizing Wire Hooks

PDF download Download Article
  1. Press-in wire hooks are designed to be inserted into drywall without hammers or any other tools. These wire hooks are sometimes known by their brand names, like Monkey hooks or Gorilla hooks. [3]
  2. Make a small pencil mark where you will insert the hook. With press-in wire hooks, the hanger will be approximately 2 centimetres (0.79 in) lower than your hole.
    • Measure the length of the slack if the item you are hanging has a wire on the back of it. Pull the center of the wire up, then measure the distance from the bottom of the object to the top of the wire.
  3. Line the hook up with your mark and press it firmly into the wall. The entire wire except for the little hook on the end should go into the wall. Twist the wire so that the hook is facing up.
  4. Finish by placing the object you are hanging on the hook using the wire or hanging hardware on the back. You may have to pull the hook out from the wall a little or press it in further, depending on the item you are hanging. [4]
    5. Advertisement
Method 3
Method 3 of 4:

Securing Items with Threaded Anchors

PDF download Download Article
  1. Threaded anchors are made specifically for use in drywall. They have large, aggressive threads that hold to the drywall. They act as anchors for a support screw, which is what you will actually hang your pictures from. You will need to buy support screws that are the right size for your anchor. [5]
    • You can choose between nylon or brass threaded anchors. While the nylon anchors are cheaper, the metal ones hold up better.
  2. If your picture frame or mirror has a wire-hanger in the back, be sure to consider the slack when determining where you want the picture or mirror to hang.
    • If you are using 2 anchors because your item has 2 hooks, make sure to measure the distance between the hooks to determine how far apart your threads should be from one another.
    • If you are using 2 anchors simply to provide more strength, determine their placement by first measuring the width of your object. Divide that number into 3. Place 1 anchor at the 1/3 position and the second anchor at the 2/3 position.
    • For example, if your picture is 9 inches (23 cm) wide, you’d place 1 anchor at 3 inches (7.6 cm) in from the edge, and the second at 6 inches (15 cm).
  3. If you are using 2 anchors, double check that the 2 marks are in line either using a leveler or measuring down from the ceiling.
  4. These threaded anchors do not require a drill. Place the tip of the screw on your pencil mark and use a Phillips head screwdriver to press the anchor firmly into the wall. Turn the screwdriver to the right until it is flush in the wall. [6]
    • Make sure you keep the screw perpendicular to the floor as you screw. If you get off track, back up and place it in the perpendicular position before resuming.
  5. Line up the screw and the anchor and, using either a Philips or flat head screwdriver, turn the screw clockwise just until the base of the screw comes to rest against the base of the anchor.
    • If the object you are hanging has a mounting bracket, you may need to slide the screw through the bracket before screwing it into the anchor.
  6. Line your item’s hanging hardware up to the support screw and fasten. If you find that there is not enough space to accommodate the hanging hardware, loosen the support screw slightly.
    7. Advertisement
Method 4
Method 4 of 4:

Hanging Heavy Objects with Molly Bolts

PDF download Download Article
  1. Molly bolts are the strongest of your options, holding up to 100 pounds (45 kg) in straight drywall. A molly consists of a screw and a sleeve. The sleeve flays out against the backside of drywall to create a wide base of support. [7]
    • You will need a drill to install a molly bolt. Attach the bit that matches the size of your molly bolt.
  2. Remember that molly bolts create large holes in your wall, so choose your placement carefully. If you are using 2 molly bolts, predetermine how far apart you need them to be according to the size of your item. Use a tape measure to make the two marks the correct distance apart. Double check that the 2 marks are in line either using a leveler or by measuring down from the ceiling.
    • If the item you’ll be hanging has a wire hanger on the back, be sure to consider the length of the slack. You can test this by pulling the center of the wire tight toward the top of your object. Measure from the bottom of the object to where the wire catches.
  3. Keep the bit perpendicular to the floor. Use the same size bit as the bolt. For example, if you chose a 1 ⁄ 4 inch (6.4 mm) bolt, use a 1 ⁄ 4 inch (6.4 mm) bit.
  4. Place the molly bolt, the screw and the sleeve together, into the hole you’ve drilled.
    • Some drywall flakes are normal and can just be brushed off the wall.
  5. Use your drill or a screwdriver to screw the molly bolt flush into the wall. As you screw, the sleeve spreads behind the wall and you will feel it tighten. [8]
    • If what you are hanging requires brackets, remove the screw by turning it to the left. The sleeve will stay in place. Place the screw through the bracket and screw it back into place.
  6. Line your item’s hanging hardware up to the molly bolt and fasten them together. If you find that there is not enough space to accommodate the hanging hardware, loosen the screw slightly.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you remove old wall anchors out of drywall?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    You could pull them out with a pair of pliers, if you wanted to. If not, you could always take 1/4 in (0.6 cm) drill bit and drill out the insert.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • To hang multiple lightweight, unframed photos or postcards, consider placing 2 adhesive hooks several feet apart and tying a string in between. Use clothespins or paperclips to fasten your postcards to the string for a banner look.
        Thanks
        Helpful 0 Not Helpful 0
      • If you're trying to hang a small item with exact holes, make a photocopy of the item. Use the photocopy as a template to drill on the wall.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Using Adhesive Hooks

      • Adhesive hooks
      • Rubbing alcohol or dish soap
      • Clean rag or paper towel
      • Tape measure
      • Pencil

      Utilizing Wire Hooks

      • Wire hooks
      • Tape measure
      • Pencil

      Securing Items with Threaded Anchors

      • Threaded anchors
      • Support screws
      • Phillips head screwdriver
      • Tape measure
      • Pencil

      Hanging Heavy Objects with Molly Bolts

      • Molly bolts
      • Standard drill
      • Drill bit the same size as the molly bolt
      • Phillips head screwdriver
      • Tape measure
      • Pencil

      You Might Also Like

      How to
      Use Dry Wall Anchors
      How to
      Install Ceiling Drywall
      How to
      Fix a Hole in Drywall: Filling Nail Holes, Patching Large Holes & More
      How to
      Mount a TV on Drywall With and Without Studs
      How to
      Install Drywall
      How to
      Repair Holes and Cracks in Drywall with Spackle
      How to
      Remove Mold from Drywall (And When to Call a Professional)
      How to
      Repair Drywall Tape That Is Separating from Your Walls
      How to
      Repair Textured Drywall So It Blends In
      How to
      Hide Drywall Tape That's Showing Through Paint
      The Best Way to Get Rid of Drywall Dust & Prevent It from Spreading
      How to
      Tape and Mud Drywall
      Advertisement

      References

      1. ↑ https://www.apartmenttherapy.com/10-temporary-removable-products-all-renters-should-know-about-206028
      2. ↑ https://www.apartmenttherapy.com/10-temporary-removable-products-all-renters-should-know-about-206028
      3. ↑ https://www.todayshomeowner.com/how-to-hang-anything-on-anything/
      4. ↑ https://www.todayshomeowner.com/how-to-hang-anything-on-anything/
      5. ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html
      6. ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html
      7. ↑ https://www.todayshomeowner.com/how-to-hang-anything-on-anything/
      8. ↑ https://www.naturalhandyman.com/iip/inffastener/infanchor/infanchor.html

      About This Article

      Thanks to all authors for creating a page that has been read 54,615 times.

      Did this article help you?

      Advertisement