PDF download Download Article PDF download Download Article

Ryegrass is often used in northern climates due to its ability to tolerate cool temperatures, and is typically planted when other, more permanent grasses have died out for the year. Unlike other types of grass which often go dormant at the first frost, ryegrass can stay green and lush during the winter months. Properly and carefully planning your planting area, preparing your soil, and planting the ryegrass seeds can help you create a great crop of ryegrass.

Method 1
Method 1 of 4:

Preparing Your Planting Area

PDF download Download Article
  1. It’s crucial that you plant your ryegrass during the correct season so that it germinates properly. The air temperature should reach between 60 and 75 degrees Fahrenheit (16 to 24 degrees Celsius) during the day. It’s best to plant rye seed when the temperatures reach that point but may begin to fall in a few weeks (planting rye seed before it starts getting hotter can cause the rye to die). [1]
  2. Rye seed comes in two versions – annual and perennial. The annual seed does not germinate as well as the perennial, which means you’ll need to use more of the annual variety to get the same lush look you could achieve with the perennial. You also have the option of using sod, which is pre-grown patches of rye that you purchase from a nursery and then lay over your prepared planting area. [2]
    Advertisement
  3. Whether you are seeding or sodding ryegrass, you’ll need to fill in the existing soil so that it reaches the correct depth for your ryegrass - about 4 to 6 inches (9 to 12 cm). You can use topsoil to fill in low areas, but the composition should have less than 20% clay, and it should not contain any herbicides.
  4. This will give the soil the nutrients necessary for your ryegrass to grow well. Phosphorous and potassium fertilizer are your best options for use with ryegrass.
  5. Advertisement
Method 2
Method 2 of 4:

Seeding Ryegrass

PDF download Download Article
  1. If you’re planting rye seed on new soil, it needs to be tilled. This allows oxygen to get into the soil. It also breaks up clumps of soil, allowing the rye seed to germinate. Evenly till the soil to ensure even growth of your rye seed.
  2. This is crucial if you’re growing ryegrass in an area that is a permanent lawn - that has other grasses or plant growth during other times of the year. Mowing the existing lawn as short as possible will give the rye seed more room to take to the ground.
  3. If you’re using the annual variety of ryegrass seed, you’ll need to spread more than you would with the perennial variety. You generally need 15 to 20 lbs (7 to 9 kgs) per 1000 square feet (9.5 square km) when you’re using annual seed.
    • Perennial seed should be spread at 10 lbs (5 kgs) per 1000 square feet.
    • These amounts apply equally to overseeding an existing lawn and seeding new soil.
  4. You should divide the amount of seed that you need to use in half. Spread one half of it in one direction, and then spread the second half of the seed perpendicular to your first planting direction. This will help ensure an even spread of your seed.
    • Depending on the size of your lawn, you may want to use either a push spreader or a hand spreader to spread the rye seed. Hand spreaders are typically used for small lawns that have large amounts of detail, while push spreaders may be best for larger lawns or new soil with larger open areas.
  5. Using a metal rake, rake the seed into the soil to ensure most of it gets into the soil (rather than lying on top). Rake gently - you don't want to move the seed around too much, and you don't want to damage the soil. [3]
    • If you're overseeding an existing lawn, it might be hard to rake the seed into the soil. If you can't rake an existing lawn, that's fine. The existing growth - even if it's short - should ensure the rye seed isn't disturbed.
  6. Once you've spread the seed, water the seeded area until it's moist. This will soften up the soil and make it easier for the rye seed to take root. It will also help the rye seed sink into the soil. [4]
  7. Advertisement
Method 3
Method 3 of 4:

Laying Ryegrass Sod

PDF download Download Article
  1. The sod you use for planting ryegrass should be cut no more than 24 hours before you plan to plant it. If you can’t plant the sod right away, store in a cool, dark place so that it doesn’t dry out.
  2. The soil you lay the ryegrass sod on top of should be slightly moist. This will help the sod begin to take root. It also ensures that your ryegrass sod doesn’t dry out.
  3. The sod will root best if it’s laid in a staggered placement. This means that the seams of the sod pieces should not line up exactly. Lay one row, then stagger the second row so that the seams from the first row touch the middle of each piece in the second row.
    • You may have to cut down the sod to ensure it fits into smaller spaces or staggers properly. Use garden shears to gently cut the sod pieces down to size. The sizing doesn't need to be exact since you can fill the spaces in with soil, but it should be pretty close.
  4. If you’re sodding a new ryegrass lawn on a slope, lay the soil out as you would on a flat surface. Then stake it with garden stakes so that the sod stays in place until it takes root.
  5. This prevents the edges of the sod from drying out. It also helps the sod take root in a uniform manner, without space in between, giving your lawn a smooth look.
  6. Once you’ve laid the sod and filled in any cracks, water it with a garden roller that is about one third full. This also helps smooth out the sod and soil and will contribute to a smooth lawn.
  7. Advertisement
Method 4
Method 4 of 4:

Caring for Your Ryegrass

PDF download Download Article
  1. Until the ryegrass takes root – about three days for sodded ryegrass and two weeks for seeded ryegrass – water your lawn two to three times a week. Your grass should be moist but not saturated. When puddles begin to appear after you water, you can cease watering regularly and proceed only as needed. [5]
  2. Applying a fertilizer high in nitrogen helps the ryegrass grow. It’s also great if you’ve overseeded an existing lawn and will be using it later to grow vegetables. [6]
  3. Ryegrass grows very quickly, which means you’ll need to mow your lawn a few times a week. You should set your mower blade to a high setting. [7]
  4. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    What is the best time to plant rye grass?
    Maggie Moran
    Home & Garden Specialist
    Maggie Moran is a Professional Gardener in Pennsylvania.
    Home & Garden Specialist
    Expert Answer
    They grow best when the air temperatures are between 60-75 degrees. This ensures the soil temperature is kept between 50-65 degrees.
  • Question
    How long does it take for rye grass to grow?
    Maggie Moran
    Home & Garden Specialist
    Maggie Moran is a Professional Gardener in Pennsylvania.
    Home & Garden Specialist
    Expert Answer
    Certain types can grow in as quickly as 5-10 days while some of the longer types can take 7-12 days to germinate.
  • Question
    How much rye grass do you plant per acre?
    Maggie Moran
    Home & Garden Specialist
    Maggie Moran is a Professional Gardener in Pennsylvania.
    Home & Garden Specialist
    Expert Answer
    On average, you can plan to plant about 30-40 pounds of rye grass for each acre.
See more answers
Ask a Question
      Advertisement

      Tips

      • Ryegrass is not perennial, and therefore must be planted each year.
      • Ryegrass will reach the end of its growing season around the end of May. At this point, avoid watering the grass for a few days. This will allow the ryegrass to become dormant, and will aid in bringing about the permanent, summer grass.
      • Like other types of grass, you must mow the ryegrass at least once a week during its growing season. Mowing the grass using the tallest setting on the mower provides the best results with this type of grass.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Ryegrass is best in areas that don’t need to be weeded often, or where the existing plant life has a short growing season. Avoid planting it in flower beds.
      • As ryegrass often grows in thin clusters, mowing it too short can make your lawn look uneven. Experiment with different lawn settings to find the look you like best.
      Advertisement

      About This Article

      Article Summary X

      To plant rye grass, start in the late summer or early fall by finding a spot with soil that’s 4-6 inches deep. If necessary, add topsoil to fill in any low areas, but make sure that the topsoil contains less than 20% clay and is free from herbicides. Then, add phosphorous and potassium fertilizer and till the soil. Next, spread half the seed in one direction, then spread the second half of the seeds perpendicular to your first planting direction. After that, gently rake the seeds into the soil and water the seeded area to help the rye sink in and take root. For more information from our Horticultural co-author, including how to lay ryegrass sod, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 181,097 times.

      Reader Success Stories

      • Wayne Tuohig

        Sep 23, 2017

        "I have never used rye before, but this article answered all of the questions I had about over seeding with rye ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement