PDF download Download Article
Preserve your flowers for years to come
PDF download Download Article

You can use pressed flowers as decorative additions to cards, journals, or scrapbooks, oryou can display them in frames. There are several different ways you can press flowers, from a single-day process by ironing them to a weeks-long process by using heavy books or a wooden press. Whichever way you choose, you’ll be able to enjoy pressed flowers for a long time to come.

How Long to Press Flowers

  • Use heavy books to press flowers between two pieces of parchment paper for 1-2 weeks.
  • Press flowers in a flower press for 3 weeks to a month.
  • Flatten flowers under a heavy book for at least ten minutes, then iron the flower between sheets of parchment paper for 10-15 seconds.
Method 1
Method 1 of 5:

Cutting and Preparing the Flowers

PDF download Download Article
  1. Use flowers you got from a florist or the grocery store, or pick your own from a garden. If you do pick your own, cut them in the morning after the morning dew has evaporated and avoid picking them on rainy days—you want them to be as dry as possible. Flowers with flat blooms, like violets, daisies, and shrub roses, are the easiest to press, but you can also use thicker blooms, like peonies and orchids. [1]
    • Avoid using really thick flowers, like impatiens and begonias. They’re so thick that they generally start to get moldy before they actually dry out.

    Tip: If your flowers have stamens (long, slender stalks protruding from the center of the bloom), use a pair of sharp scissors to cut them off as close to their base as possible so they don't stain the flower.

  2. Watermark wikiHow to Press Flowers
    This is totally up to you and what you want to use the flowers for. Keep in mind that you can always trim away more of the stem after the flowers have been pressed, but you can’t add more length to them once they’ve been cut. [2]
    • If you’re mainly interested in preserving the actual bloom, trim the stem down to 1 to 2 inches (2.5 to 5.1 cm).
    Advertisement
  3. Watermark wikiHow to Press Flowers
    Use a pair of sharp scissors to trim away the leaves as close to the stem as possible rather than just plucking them off. If you want, leave a few leaves in place for the aesthetic. [3]
    • If you aren’t sure which look you prefer, try drying one flower that has a few leaves left on the stem along with one flower that has been completely trimmed.
  4. Watermark wikiHow to Press Flowers
    Orchids, peonies, and roses are notoriously hard to press because they are so thick. Use a pair of scissors or a sharp knife to cut the bloom and stem in half lengthwise. Lay the flower down on a flat surface and cut away half of the bloom, using a motion similar to how you would cut an apple in half. Do your best to cut the stem in half equally, too. If you make an even enough cut, you could use both sides of the flower in your pressing. [4]
    • It’s okay if the actual cut doesn’t look perfect or if there are little bits of petals left on the backside of the flower. Those imperfections won’t be visible after the flower has been pressed.
    EXPERT TIP

    Jeanne Walker

    Florist
    Jeanne Walker is a Florist and the Owner of Fringe Flower Company, a floral design shop that specializes in weddings, special events, and daily deliveries. Fringe Flower Company, based in Walnut Creek, California, provides customized hand-tied and vase bouquets along with potted plants, succulent gardens, tulip french buckets, and wreaths. Jeanne also conducts floral design workshops and parties throughout the San Francisco Bay Area.
    Jeanne Walker
    Florist

    Expert Trick: When you're choosing flowers to press, look for flowers that have a single row of petals all the way around, instead of rows of stacked or unfurling petals. Daisies, violas, pansies, and primroses are all very nice to press. You can also press individual petals from flowers that are harder to press, like peonies or roses.

  5. If you prep your flowers and realize you aren’t ready to start pressing them for whatever reason, keep them fresh in the fridge. Put them into a plastic, resealable bag. [5]
    • This also comes in handy if you find flowers you want to press while you’re traveling. You can keep them in the fridge until you go back home.
    • If you don’t have access to a fridge, keep them in a cooler or somewhere similar to try and preserve them until you can press them.
  6. Advertisement
Method 2
Method 2 of 5:

Using Heavy Books

PDF download Download Article
  1. Watermark wikiHow to Press Flowers
    The parchment paper is used to absorb excess moisture from the flowers as they dry out. Arrange the flowers so that none of their petals, leaves, or stems overlap. [6]
    • If you don’t have parchment paper, you could also use coffee filters to the same effect.
  2. Watermark wikiHow to Press Flowers
    Use a book that is large enough to completely cover the flowers. If there are ends sticking out from the pages of the book, they won’t get pressed. Put the flowers toward the back of the book so that the bulk of the book’s weight will rest on top of the flowers. [7]
    • Make sure to choose a book that you won’t need to use over the next several weeks.
  3. Again, choose heavy books to provide the most weight. Stack them somewhere they won’t get knocked into easily. [8]
    • You could also use bricks instead of books for the same effect.
  4. Set a reminder on your calendar to check the flowers after a few weeks have passed to see if they’re done. They should feel like fine tissue paper. If they aren’t done yet, carefully shut them back into the book for another week to continue pressing them. [9]
    • It takes less time to press flowers with heavy books than if you were to use a wooden flower press because there is considerably more weight being applied from the books.

    Tip: Use tweezers to remove the flowers from the parchment paper. The dried flowers will be super delicate and could break easily if you accidentally pinch them with your fingers.

  5. Advertisement
Method 3
Method 3 of 5:

Making a Wooden Flower Press

PDF download Download Article
  1. Making your own flower press doesn’t take a long time and gives you a designated press so you won’t have to scrounge around trying to find heavy books or bricks. Each piece of wood should be 1 to 2 inches (2.5 to 5.1 cm) thick. You can use plywood or other scraps of wood. [10]
    • If you visit your local home improvement store, you may be able to find scraps of wood for sale that can be used for your press.
    • If you are cutting your own pieces of wood, you can make your press any shape or size that you want. Some people prefer round presses, while some want a smaller or bigger press, depending on how many flowers they need to dry at one time. A 9 by 12 in (23 by 30 cm) press can hold anywhere from 10-20 blooms, just depending on what kinds of flowers you are pressing.
  2. Watermark wikiHow to Press Flowers
    Arrange your flowers on a piece of parchment paper so that they aren’t overlapping at all. Set another piece of parchment paper over the top of the flowers and press down lightly with your hands. [11]

    Tip: Coffee filters also work for this process if you don’t have parchment paper. As long as the paper is absorbent, it should do the trick.

  3. Watermark wikiHow to Press Flowers
    Use pieces of cardboard that are at least as big, if not bigger, than the pieces of parchment paper. Choose clean, dry cardboard to prevent introducing any unneeded dampness or bacteria to your flowers. [12]
    • The cardboard just helps provide another semi-absorbent layer for the flowers. Because this method takes about a month to complete, it’s important that all the moisture from the flowers has somewhere else to go so they dry completely.
  4. Watermark wikiHow to Press Flowers
    Arrange the wood so that the corners line up as perfectly as possible. If you need to reposition one of them, lift it up and set it back down rather than moving it while it’s in contact with the cardboard, as this could shift the flowers underneath and ruin their positioning. [13]
  5. With c-clamps, one side of the clamp stays stationary and the other side can be adjusted by turning the handle to move the screw up or down. Open each clamp wide enough to fit the pieces of wood. Start by positioning one clamp over a corner of the press. Adjust the screw mechanism to bring the sides of the clamp together as tight as possible. Repeat this with the other 3 clamps. [14]
    • Visit your local home improvement store or shop online for your c-clamps. You don’t need to get anything fancy, so you should be able to find these clamps for about $5 a piece.
    • If you bought a wooden press rather than making one yourself, there should be bolts for you to utilize rather than having to use clamps.
  6. Resist undoing the press and checking on your flowers until at least 3 weeks have passed. If you do, it could disturb the flowers and make it hard to get them back into the same position so that they dry perfectly. To be safe, wait 30 days before opening the clamps and removing the flowers. [15]
    • If you have more flowers you want to press in the meantime, use a second press or one of the other pressing methods so you don’t disturb the ones that are in process.
    • This is one of the more time-intensive methods because it doesn’t use much weight or heat to press the flowers. If you want to speed up the pressing time, add a few bricks or books on top of the wood.
  7. Advertisement
Method 4
Method 4 of 5:

Heating the Flowers with an Iron

PDF download Download Article
  1. Watermark wikiHow to Press Flowers
    While you’re getting the rest of your supplies ready, simply set the prepared flowers underneath a large book. This will make it easier to iron because they won’t be as thick as they were when you cut them. [16]
    • You could do this 1 to 2 days in advance, or just 10 minutes before ironing. The more time the flower has to flatten, the easier it’ll be to iron. Use sheets of parchment paper between the book and flowers if you’re concerned about the book being exposed to moisture.
  2. Empty all water from your iron and turn it on to the lowest setting. The last thing you want when ironing your flowers is any kind of moisture or steam, so take a minute to empty out the water tank and don’t refill it. Plug in the iron and switch the setting to the lowest, driest heat setting available. [17]
    • You may be tempted to use higher heat to make the process go even faster, but high heat could burn the flowers and turn them brown, making them lose their beautiful color.
  3. Watermark wikiHow to Press Flowers
    Get your ironing station set up and put a piece of parchment paper down on top of it. Arrange the flowers so that they aren’t overlapping at all; otherwise, they could adhere together. Set another piece of parchment paper on top of the flowers. [18]
    • Avoid moving the paper once it is in place so the flowers don’t shift at all.

    Tip: For this method, you can replace the parchment paper with wax paper. Just remember to lay a thin, clean cloth over the top sheet of wax paper before you start ironing to prevent any wax from transferring onto your iron.

  4. Watermark wikiHow to Press Flowers
    Simply hold the iron still rather than moving it back and forth like you would if you were ironing a garment. If the parchment paper is larger than the iron, work in sections by lifting the iron up and then setting it back down on the next part that needs to be ironed. [19]
    • If you leave the iron on the flowers for too long, they will burn, so make sure to count the time and remove the iron after 10 to 15 seconds at the most.
  5. Watermark wikiHow to Press Flowers
    Remove the iron after 10 seconds and let the parchment paper cool off for 15 to 20 seconds, or just until it is cool to the touch. This will help prevent the flowers from burning from accidentally being exposed to the heat for too long. [20]

    Warning: Make sure to set the iron down on the ironing board so that it is sitting up. If you put it face down, the iron will end up burning the board and could potentially cause a fire.

  6. It shouldn’t take more than 5 minutes total to press your flowers unless you’re using really thick blooms, like peonies or orchids. To check the flowers, gently lift the top sheet of parchment paper and touch the blooms. If they feel papery thin and dry, they’re done! If they are still retaining moisture, keep ironing them. [21]
    • Don’t forget to unplug the iron when you’re done and refill the water tank so it’s ready to go the next time you need to use it on your clothes.
  7. Advertisement
Method 5
Method 5 of 5:

Displaying Pressed Flowers in a Glass Frame

PDF download Download Article
  1. This can be any combination of flowers and greenery that you think look nice together. For a minimalistic look, you could choose just a few special blooms to use. If you’d like something that looks more plentiful, use upwards of 10 to 15 flowers (or more!) for your frame. [22]
    • Don’t be afraid to mix-and-match colors and types of flowers.
  2. Watermark wikiHow to Press Flowers
    Before you add any flowers to the frame, clean the glass inside and outside so that you start your project with a clean slate. Use a window or glass cleaner and a soft microfiber towel so that there is no lint left behind. [23]
    • For this project, you can use a glass frame that hangs or that can be propped up, just depending on where you’d like to put it once it’s done.
    • You can buy glass frames online, from your local art supplies store, or from a lot of home goods stores, too.
  3. Play around with the placement of the flowers before using the tape to adhere them to the frame. You could arrange them from largest to smallest, in rows, or without any order at all. [24]
    • If needed, use scissors to trim stems or cut a flower down to the right size.
    • Some people like to add a piece of patterned scrapbook paper to the frame to act as a background for the flowers. You can do this if you want, or you can leave the glass frame as it is so it’s see-through.

    Tip: Use tweezers to pick up the flowers if you’re having trouble handling them.

  4. Watermark wikiHow to Press Flowers
    Once you know where you’d like each bloom to be, stick a really small piece of double-sided tape to the back of each bloom and press it firmly, but gently, into place on the glass. The bigger the flower, the bigger the piece of tape you can use; try to not use so much that the tape is visible when you’re looking down at the flower, though. [25]
    • If you’re having trouble ripping off small enough pieces of tape, use scissors to cut a longer piece of tape into small sections.
  5. After all the flowers are secured into place, you’re almost finished! Simply secure the two sides of the frame together, and then either hang it up, display it on a desk or table, or give it away as a gift. [26]
    • This is a great way to make a keepsake for yourself or someone else.
  6. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Can I put pressed flowers into a picture frame?
    Community Answer
    You certainly can. If you want them to stay in the same position, try gluing the pressed flowers to a paper backing before you put them in the frame. This will allow you to make a permanent artistic arrangement, which can be prettier than simply sticking the flowers in randomly.
  • Question
    When should I pick the flowers?
    Community Answer
    Freshness is the key. Choose flowers that are either still in bud form or that are freshly bloomed. If you’re picking them from a garden, do so in the morning right after the dew has evaporated.
  • Question
    I don't have blotter paper. What other paper can I use?
    Community Answer
    Paper tissues or regular printer paper work just fine. Just make sure they're dry.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      Cutting and Preparing the Flowers

      • Sharp scissors
      • Airtight bag (optional)

      Using Heavy Books

      • Parchment paper
      • 3 to 4 heavy books
      • Tweezers

      Making a Wooden Flower Press

      • 2 9 by 12 inches (23 by 30 cm) pieces of wood
      • Parchment paper
      • Cardboard
      • 4 c-clamps

      Heating the Flowers with an Iron

      • Heavy book
      • Iron
      • Ironing board
      • Parchment paper

      Displaying Pressed Flowers in a Glass Frame

      • Pressed flowers
      • Double-sided tape
      • Scissors
      • Glass picture frame
      • Glass cleaner
      • Microfiber towel

      About This Article

      Article Summary X

      To press a flower, first trim off the excess stalk and any unwanted or unhealthy leaves. Then, grab a large book that's big enough to hold your flower, and lay a sheet of parchment paper inside of it. Place your flower on top of the parchment paper. Next, place a second sheet of parchment paper on top of the flower. Close the book and press down on the cover to flatten the flower. Stack 2 to 3 more books on top of the first book, and wait a few weeks for your flower to completely dry out and flatten. If the pages of your book aren’t closing because your flower is too big, cut it in half by cutting vertically through the stem and head of the flower. If you don’t have a book that's big enough to flatten your flower, you can put it in between 2 pieces of wood and weigh it down with something heavy. For tips on using heat to press your flowers, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,089,170 times.

      Reader Success Stories

      • Lindsey Welch

        Sep 27, 2016

        "It's been a long time since I have pressed flowers. Yesterday I was given a bouquet for a special event, and ..." more
      Share your story

      Did this article help you?

      Advertisement