Download Article
Download Article
You may want to make some extra money by refining your own gold at home, or you may be a jeweler who wants to refine gold in-house. There are multiple ways to refine gold on a small scale as long as you take appropriate safety measures. This article will teach you to refine gold using the aqua regia method.
Steps
-
Place your gold jewelry, gold powder or nugget inside of a crucible. Most crucibles are made of graphite, which enables them to withstand the melting of the material inside.
-
Place the crucible on a fireproof surface.Advertisement
-
Aim an acetylene torch at the gold. Aim the flame at the gold until the gold is completely melted.
-
Pick up the crucible using crucible tongs.
-
Separate the gold into small pieces and allow them to harden. This is called “making shot.” If you are refining small pieces of jewelry like rings, then you can simply melt the piece without making shot particles.
Advertisement
-
Choose the appropriate container.
- For every ounce of gold that you want to refine, you will need 300 milliliters in container capacity.
- Use containers large heavy-gauge plastic buckets or Pyrex Vision Ware pots.
-
Wear protective gear. [1] X Research source
- Put on a pair of rubber gloves to protect your hands from the acid. Wear the gloves as you handle any of the chemicals mentioned in this article.
- Wear a rubber apron to protect your clothing.
- Wear goggles to protect your eyes.
- Consider wearing a face mask to prevent the inhalation of noxious fumes.
-
Place the container outdoors in a well-ventilated area. The acid reactions in the aqua regia process produce strong and noxious fumes that are extremely dangerous.
-
Pour 30 milliliters of nitric acid for every ounce of gold into your container. [2] X Research source Allow the acid to react with the gold for 30 minutes.
-
Add 120 milliliters of hydrochloric acid or muriatic acid for every ounce of gold in the container. Allow the solution to sit overnight until all of the acid fumes have been dispelled.
-
Pour the acid into another larger container.
- Make sure that none of the particles are poured out with the acid as they will contaminate the gold.
- The acid should have a clear emerald green color. If the color is murky, then you should probably pour it through a Buchner filter funnel.
Advertisement
-
Heat 1 quart of water and add 1 pound of urea to the water. Continue heating the mixture until it boils. [3] X Research source
-
Gradually add the water/urea mixture to the acid.
- The acid mixture will bubble as you add the water and urea. Add the mixture slowly so that it doesn’t cause the acid to bubble out of its container.
- The water/urea mixture neutralizes the nitric acid but not hydrochloric acid in your solution.
-
Add a selective gold precipitant to 1 quart of boiling water following the manufacturer’s instructions. [4] X Research source
- In general, you will add 1 ounce of precipitant per ounce of gold that you are refining.
- Avoid putting your face near the container’s opening. The smell is very strong and pungent.
-
Add the water/precipitant solution slowly to the acid.
- The acid will turn a muddy brown color, which is actually caused by the separation of the gold particles.
- Wait 30 minutes to allow the precipitant solution to work on the gold particles.
Advertisement
-
Immerse a stirring stick into the acid solution.
-
Place a drop of the solution onto the end of a paper towel.
-
Place a drop of precious metal detection liquid on the spot of acid. If the spot turns purplish, then you need to give the precipitant more time to work before discarding the acid. [5] X Research source
-
Pour the acid into a clean container as soon as the acid is clear of dissolved gold particles.
- The acid should be amber with what looks like mud collected at the bottom of the container.
- Do not pour the mud off with the acid. The mud is pure gold.
Advertisement
-
Add tap water to the mud remaining in your container. Stir the water and allow the mud to settle.
-
Pour the water into the container into which you poured the acid.
-
Rinse the gold mud again 3 to 4 times with water and pour off the excess water.
-
Rinse the gold with aqua ammonia. You will see white vapors come off of the gold mud. Make sure to protect your eyes and to avoid inhaling the fumes.
-
Rinse the ammonia from the mud with distilled water.
-
Pour the mud into a large beaker. Pour off all of the distilled water so that only mud remains.
Advertisement
-
Place your beaker onto a hot plate. Turn the hot plate on and let the beaker heat up gradually so that the thermal shock doesn’t cause it to shatter.
-
Continue heating the mud until it develops a powder-like consistency. [6] X Research source
-
Pour the mud onto multiple layers of paper towels. Wrap the mud in the towels and soak the mud in alcohol.
-
Place the mud into a graphite crucible and melt it. The mud will take on the appearance of metal and will be 99 percent pure if you performed the process correctly.
-
Pour the gold into an ingot mold. You can then take it to a jeweler or to a precious metals dealer to exchange it for cash if you desire.
Advertisement
Community Q&A
Search
-
QuestionCan muriatic acid and sodium metabisulfite be used together to recover gold, or will it explode?Community AnswerThe muriatic acid, when added to the nitric acid, is what enables the mixture to melt the gold... Neither Nitric nor muriatic,(Hydrochloric) by themselves are capable of liquefying gold. The metabisulfite will separate (precipitate) the gold from the Aqua Regia solution (once the solution has had the Nitric neutralized with Urea), "dropping" the actual purified gold into the mud like substance that will sink to the bottom.
-
QuestionWhat can I get before refining gold?Community AnswerIf your gold is unrefined, your best option may be to ship it to a refiner. These processes may be challenging and cost-prohibitive for you. Another issue is that if you try to refine your own scrap, you may only recover the gold and not the other precious metals that may be present, such as silver and platinum. One great refiner that has been doing this for over 100 years is Pease & Curren.
-
QuestionIf nitric acid dissolves all the other metals, does that mean I don't need hydrochloric acid to dissolve gold or gold precipitant to recover it?Community AnswerIn some cases, you are correct. If gold is mixed evenly in the alloy and at a low enough concentration, you can use plain nitric acid to dissolve away impurities. However, if the gold is more pure (or is an external plating), what actually happens is that the nitric acid tries to dissolve everything, but the gold blocks it from coming through. In that case, you purify an outer layer, but the internal layers are not pure because they are protected by an insoluble layer of gold. To fix this, we can add hydrochloric acid to the nitric acid (so the gold is also dissolved) and then selectively precipitate out the gold.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Refining your own scrap gold before presenting it for sale can save a significant amount of money.Thanks
- Be careful to measure the acid before adding it to the mixture.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure that you are aware of any ordinances in your municipality regarding any of the chemicals that you use to refine gold.Thanks
Advertisement
Things You'll Need
- Gold jewelry or nuggets
- Graphite crucible
- Acetylene torch
- At least 3 heavy gauge plastic buckets or Pyrex containers
- Rubber gloves
- Rubber apron
- Goggles
- Face mask
- Nitric acid
- Hydrochloric or muriatic acid
- Urea
- Selective gold precipitant
- Stir stick
- Paper towel
- Precious metal detection liquid
- Aqua ammonia
- Distilled water
- Glass beaker
- Hot plate
- Ingot mold
References
- ↑ https://sciencing.com/refine-gold-nitric-acid-10036480.html
- ↑ https://sciencing.com/refine-gold-nitric-acid-10036480.html
- ↑ https://www.ishor.com/refine-gold-by-the-acid-method
- ↑ https://www.ishor.com/refine-gold-by-the-acid-method
- ↑ https://sciencing.com/refine-gold-nitric-acid-10036480.html
- ↑ https://www.ishor.com/refine-gold-by-the-acid-method
About This Article
Article Summary
X
If you want to make some extra money, you can refine your own gold at home. You’ll need a crucible made out of graphite that you can put your gold jewelry, gold powder, or gold nugget into. To handle the crucible once the gold has been melted down, you’ll also need a pair of tongs. Once you melt the gold down, you'll need to soak it in nitric acid and hydrochloric acid as well as urea and precipitant to help break it down further. Before you can reheat the gold, you'll need to clean it. Then, you can pour it into a mold and reconstitute it. To learn how to test the acid for dissolved gold, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 447,727 times.
Reader Success Stories
- "Thank you for the valuable information. I have a significant quantity of raw metals, which are replaced by soil and rocks (gold barrette iron). I did not know the chemical powders to dissolve mixed gold gold with minerals, soil and rocks." ..." more
Advertisement
91%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Thank you for the valuable information. I have a significant quantity of raw metals, which are replaced by soil and rocks (gold barrette iron). I did not know the chemical powders to dissolve mixed gold gold with minerals, soil and rocks."
..."
more
"I wasn't sure of the best way to purify gold, and now I know, thanks."
"A great article. Very informative. Thank you. "
