Download Article
Download Article
Shortening pants is necessary, but it can be time-consuming. This sounds complicated, but it is easy. Once you have done it once, you will find it quick, easy, and inexpensive.
Steps
Download Article
-
If the pants have an unfinished bottom, you are on your way. If not, turn the pants inside out, undo the hem at the bottoms and smooth out the creases with a steam iron. -
Turn the pants back to the right side. Take a pair of pants that you have, that are the correct length and measure the outside leg, including the waistband.Advertisement -
Measure the length and make a chalk mark on the new pants. Make a chalk mark across the pants and transfer the mark all round the bottom. You now have a chalk mark that is the correct length all round the bottom. -
Leave an inch and a half more than the mark and cut the rest off. If the fabric is prone to fraying, rolling, or unraveling, you might want to machine-stitch a row of zigzag stitching around the very end. Cutting a woven fabric with pinking shears can also help to prevent fraying. -
5Take the wonderweb, a glue that melts, and sew with a sewing machine on the inside around the bottom of the pants. If you don't have a machine, pin the wonderweb every two or three inches all the way round.
-
Lay the leg of the pants flat on your table. You should now see the leg with the chalk mark all round the bottom plus the inch and a half allowance. Bend the leg in so that the chalk mark is on the edge. Make certain that all is smooth and flat inside. Be careful of the pins if you used them. -
Use a steam iron and a cloth to press the bottom of the pants with plenty of steam. This melts the glue. Remove the pins if used and press lightly again to remove any little marks and you're done. -
Do the same to the other leg.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Any accidental web showing on the inside or anywhere else can be removed with a drop of methylated spirits.Thanks
- Make sure the wearer stands up straight and is not looking down at the person doing the pinning.Thanks
- Be careful of straight pins.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Unless your legs are different lengths, take care to get the lengths of both legs the same.Thanks
- Irons and steam are hot enough, so keep hands and children away from them.Thanks
- Be careful of the pins! That's why a sewing machine is better.Thanks
- Read the washing instructions and verify that the fabric can tolerate the heat necessary for this process. For some delicate or synthetic fabrics, you may be better off doing the work by hand.Thanks
Advertisement
Things You'll Need
- Fabric shears or pinking shears. Shears used to cut paper may be too dull to cut fabric, so get a good pair, mark them, and reserve them just for sewing.
- Chalk
- Ruler
- Iron and damp cloth
- A seam ripper, razor blade or something sharp to undo the original hem
- Tape measure
- Wonderweb about 1/2 in wide, from any haberdashery or fabric store
About This Article
Thanks to all authors for creating a page that has been read 151,972 times.
Reader Success Stories
- "Just giving me the courage to have a go at this helped. Have several pair of slacks needing shortening, and didn't know where to start." ..." more
Advertisement
"Just giving me the courage to have a go at this helped. Have several pair of slacks needing shortening, and didn't know where to start."
..."
more
