NutriBullet User Guide: Instructions for Beginners

PDF download Download Article
Learn how to blend with a NutriBullet and clean it when you're done
PDF download Download Article

The NutriBullet is an at-home blender designed to make blending easy and compact. If you’ve purchased a NutriBullet and are a bit lost on what to do first, you’ve come to the right place! Using a NutriBullet is a piece of cake, and in this guide, we’ll walk you through the process step-by-step. From choosing your blade to cleaning all the components, with these tips, you can be a NutriBullet-using pro in no time.

Things You Should Know

  • Fill your NutriBullet cup with ingredients up to the max fill line. Avoid exceeding this line, as it could cause your ingredients to spill out when blending.
  • Twist on the blade tightly and flip the cup upside down. Then, place the blade end into the Power Base.
  • Press down on the cup while it’s in the Power Base to activate the blades. Let go of the cup to stop blending.
Method 1
Method 1 of 2:

Blending with a NutriBullet

PDF download Download Article
  1. If you’re making a smoothie, juice, or soup, cutting your fruits and vegetables can make blending that much easier. Aim to cut larger ingredients (like apples, bananas, celery, etc.) in halves or quarters to help them fit better in the NutriBullet cup.
    • When in doubt, always cut! The smaller your ingredients are, the less work your blender will have to do.
  2. Toss everything you want in your blended concoction into the cup. Throw in vegetables, fruits, nuts, and/or leafy greens—the possibilities are truly endless.
    • Try filling the cup with 50% fruit and 50% leafy greens to make a nutritious smoothie .
      • Bonus tip: Put the greens into the cup last so they’re on top of the fruit. This way, when you flip the cup over to blend, it’ll be the first ingredient to hit the blade, helping them blend more evenly.
    • Toss almonds and oats in the cup with the Milling blade to make a granola-like crumble to top yogurt or cereal.
    Advertisement
  3. If you’re using the Extractor blade, you likely want a smoothie or blended liquid concoction. The amount of liquid you use depends on how thick or thin you want the final product to be. As long as you don’t fill the cup over the max fill line, you’re good to go!
    • Use juice or a milk of your choice when making a smoothie.
    • Try using a broth or water when making soup .
    • If you want your concoction to be super soupy, fill the cup with liquid to the max fill line. If you want it to be thick like ice cream, try filling it ¼ of the way and adding more if needed.
    • If you’re turning something into a powder (such as coffee grounds or spices), there’s no need to add any liquid.
  4. Once all of your ingredients are in the cup, twist the Extractor or Milling blade onto the top of the cup so that the grooves of the blade line up with the grooves on the cup. Press down as you twist until the blade is tightly secured. [1]
    • Remember, the Milling blade turns dry ingredients into a powder, while the Extractor blade blends ingredients together.
  5. Look at the top of the Power Base (the bottom half of the NutriBullet machine with the cord). See those 2 notches on either side of the logo? Now, look at the rim of the blade—there are 2 round bumps. Flip the cup upside down so the bladed end is on top of the Power Base. Place the bumps inside the notches and press down to activate the blade. [2]
    • The cup may vibrate in your hands as the blade spins—this is normal!
    • Stop pressing down on the cup to stop it from spinning.
    • To keep the blade on without holding the cup, press down and twist gently to the left. This locks the notches into place. To stop the blend, press down again and twist to the right.
    • Blend for as long or as little as you like! Just know that the longer you blend, the hotter the Power Base may become (because more energy is used).
  6. Sometimes, ingredients get stuck alongside the edge of the cup or blade while blending, especially if there’s not much liquid in the cup. To ensure all your ingredients are blended, lift the cup out of the Power Base and gently shake it. Then, when everything’s all loosened up, place it back in the base to blend it again.
    • Consider flipping the cup right-side up and carefully twisting off the blade to add more liquid to your concoction to help it blend easily.
  7. Once your ingredients are blended to your liking, take the cup off of the Power Base and place it right side up (with the blade on top) on a flat surface. Gently screw the blade off of the cup to take it off.
    • Let the contents of the cup settle for a few minutes before twisting off the blade. This way, there won’t be as much food or drink at the top of the cup when you take off the lid.
  8. The beauty of the NutriBullet is that it’s portable. Dump the contents of the blender into another cup, bowl, or resealable container to enjoy now or save for later. As an alternative, drink or eat a smoothie or soup right from the cup.
  9. The NutriBullet typically comes with 2 cups: Tall (32  fl oz (4.0  c)) and Short (18  fl oz (2.2  c)). If you want to blend a lot of ingredients together, opt for the Tall cup; if you want to make a smaller concoction, stick with a Short cup.
    • Make sure to obey the max fill line labeled on the cups before filling them. If your solid or liquid ingredients exceed this line, your ingredients won’t blend correctly.
    • Consider buying extra cups online to fit your needs. NutriBullet (and competing companies) make cups with handles and flippable lids .
  10. The NutriBullet has 2 blades you can use. The Extractor blade has 4 sides and is mainly used to make smoothies, soups, and juices. The Milling blade only has 2 sides and is commonly used to mix dry ingredients into powders or butters (such as making oat flour or nut butter). [3]
    11. Advertisement
Method 2
Method 2 of 2:

Cleaning a NutriBullet

PDF download Download Article
  1. The best and easiest way to clean a NutriBullet is to place the cup and lid in the dishwasher. Place these components (and these components only) on the top rack to ensure they get nice and clean.
    • Alternatively, wash the cup and lid by hand.
    • Never put the blades or Power Base in the dishwasher. The dishwasher’s power could damage the blades, and the water will ruin the electrical components in the Power Base. [4]
  2. After each use, make sure to wash the blades thoroughly to avoid bacteria build-up. Simply use regular dish soap, warm water, and a sponge to rinse and scrub them clean. Be careful handing the blades, as the edges are sharp. [5]
    • Use a scrub brush to reach down into the crevices of the cup.
  3. Do not submerge the Power Base in water. However, it can be wiped down. Use a damp rag or paper towel to wipe away any residue from the base.
    • Always unplug the Power Base before cleaning it to avoid electrocution.
  4. If you leave a cup out too long after drinking or eating its components, it can get crusty. Luckily, getting rid of these stubborn pieces of food is easy! Fill the cup â…” of the way with water, add a few drops of soap, screw on the Milling blade, and blend. Empty the contents of the cup into the sink and finish cleaning it by hand or put it in the dishwasher.
    5. Advertisement

Printable Recipes

Community Q&A

Search
Add New Question
  • Question
    Can I use milk in a NutriBullet?
    Community Answer
    Yes. Liquids like milk and water are fine.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 28
  • Question
    Can I use hot water in it?
    Cheddar
    Community Answer
    Probably not, because the hot water may damage the cup which could affect the NutriBullet's performance.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 9 Helpful 20
  • Question
    Can it work as a food processor?
    Community Answer
    Not really. It is intended to liquefy foods, so you pretty much only get one consistency. You can try to not fully blend whatever you put in it, but that doesn't work very well.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 20
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If your NutriBullet doesn’t turn on when you push down the cup to blend, check to make sure it’s plugged in. If it is and nothing is blocking the notches on the Power Base, call NutriBullet’s customer service at (800)523-5993.
        Thanks
        Helpful 0 Not Helpful 1
      • Only put 1 or 2 ice cubes in your NutriBullet at a time to avoid damaging the blades.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Don’t immerse a NutriBullet’s cord, plug, or base in water, as this will damage the appliance.
        Thanks
        Helpful 2 Not Helpful 0
      • Avoid blending seeds or fruit pits in your NutriBullet, as these can damage your blades.
        Thanks
        Helpful 0 Not Helpful 0
      • Avoid adding hot or carbonated liquids to a NutriBullet, as this can damage the components because of built-up pressure. [6]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Puree Meat
      How to
      Make Flax Meal from Flax Seeds
      How to
      Clean the Inside & Outside of an Electric Kettle
      The 3 Best Ways to Descale a Tea Kettle
      How to
      Easily Operate a Toaster
      12 Simple Fixes for a Keurig That Isn't Working
      How to
      Clean a Deep Fryer
      How to
      Use Ninja Blender
      How to
      Cook with Just a Kettle
      How to
      Use a Stovetop or Electric Tea Kettle to Boil Water
      How to
      Use a Hand Mixer
      How to
      Use a Citrus Squeezer
      How to
      Use a Microwave Rice Cooker
      How to
      Use an Immersion Blender
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about kitchen appliances, check out our in-depth interview with Alessandra Mendes .

      References

      1. ↑ https://youtu.be/fv_TQR9LK2U?t=151
      2. ↑ https://youtu.be/fv_TQR9LK2U?t=164
      3. ↑ https://youtu.be/gSJOca9Hf0o?t=162
      4. ↑ https://www.nutribullet.com/faq/
      5. ↑ https://www.nutribullet.com/faq/
      6. ↑ https://www.nutribullet.com/faq/

      About This Article

      Article Summary X

      To use a Nutribullet, fill the large or small cup with your chosen ingredients and select the proper blade to screw onto the cup. If you want to blend a drink, use the extractor blade, which has 4 sides. For turning dry ingredients into powders, use the milling blade, which has 1 blade. Push the blade-side down onto the power base to start mixing your ingredients. When you're done, simply lift the cup to stop. To learn how to properly clean your Nutribullet, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 359,381 times.

      Reader Success Stories

      • Teresa Garza

        Mar 20, 2017

        "I misplaced the instructions. Not at all hard to figure out, but wanted to make sure I was doing it correctly, so I ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement