Download Article
Download Article
Got a small gouge in some furniture you’d like to fix? Trying to finish that birdhouse you built from scratch but you’ve got a seam you just can’t fill? Wood filler is a great way to make small repairs and touch up woodworking projects alike. It’s also a total breeze to work with. In this article, we’ll show you everything you need to know about how to prep the surface, use the wood filler, and clean up the repair.
Steps
-
Buy or make an appropriate filler. Stainable wood fillers are designed to be stained so you can match them to the rest of the wood. Some water-based wood fillers are also stainable, but they are specifically meant to be used indoors. [1] X Research source You can also make your own wood filler by adding sawdust to carpenter's glue to form a paste. [2] X Research source
-
Remove paint chips and wood splinters. If you see paint chips falling off, you need to take them off before repairing the wood. Flake them off with a scraper, getting off as much as you can. Similarly, scrape off any large splinters you see. [4] X Research sourceAdvertisement
-
Sand down the area. Rough edges can be detrimental when you're applying filler. Sanding those edges down will make the process go smoother for you. Check for rough edges directly around the damaged area. [5] X Research source
-
Remove any debris. If you leave any loose debris or sawdust behind, the filler won't stick as well. Wipe it down with a damp tack cloth and then let it dry thoroughly. You can also use a shop vac if you have one. [6] X Research source
Advertisement
-
Squeeze the filler into the hole. Use the tube to squeeze the filler into the area, making sure to fill in the deepest area by pressing the end down into it. Start at one end and gradually work your way to the other end. [7] X Research source
- If you don't have a tube, use a putty knife to apply it.
-
Overfill the hole. When adding the wood filler, you need to fill it a bit more than level with the rest of the wood. That's because the filler shrinks a bit as it dries, so it will end up flush with the wood if you overfill it. [8] X Research source
- You only need to overfill it a little bit, maybe 5%.
-
Smooth the filler out with a putty knife. Go over the filler with a putty knife to make a smooth area. Wipe off the knife and go over the area again if the first pass didn't get it as smooth as you'd like. Keep in mind you'll be sanding it later, so it doesn't have to be absolutely perfect. [9] X Research source
-
Wait for the filler to dry. Once you've got the hole filled to your satisfaction, let the filler dry completely. It will be hard to the touch when it is dry. It may take up to 8 hours on a large or deep area, though it can dry in under half an hour. [10] X Research source
- Check the packaging for wood filler for specific drying times.
Advertisement
-
Sand down the area until it is smooth and even with the wood. Use an orbital sander or standard sandpaper to sand down the area. Sand until the filler is evened out and it is level with the surrounding wood. Wipe it down to remove dust before painting or staining. [11] X Expert Source Jeff Baldwin
Residential Painter Expert Interview. 1 March 2021. -
Check that the hole is filled in. Run your hand over the repaired area to see if it's smooth. Also, make sure you have filled in the hole and that it's level with the wood. Even if you filled in the hole completely, it may have settled out and left a depression or hole. If you haven't completely filled in the hole, repeat the process by adding more wood filler.
-
Apply primer if you're painting the area. Most wood fillers can be painted, but fillers may affect how the paint looks. If you use primer first, it can help even out the look of the area. [12] X Expert Source Jeff Baldwin
Residential Painter Expert Interview. 1 March 2021. This process works particularly well if you're painting a whole piece of furniture that you've repaired holes on. -
Paint or stain the area. Once you've got the repaired area perfectly level with the rest of the wood, you can apply paint or stain to match the rest of the wood. [13] X Research source If you're not sure of the paint or stain, you may want to test it first in an inconspicuous area to make sure it matches. [14] X Expert Source Jeff Baldwin
Residential Painter Expert Interview. 1 March 2021.- You can also test stain on a piece of scrap wood.
Advertisement
Expert Q&A
Search
-
QuestionWhy is white pigmented shellac a good primer?Jeff Baldwin is a Residential Painter and the Owner of Baldwin Custom Painting, based in San Francisco, CA. With two decades of painting experience, Jeff specializes in high-end residential and small commercial painting projects. Dedicated to quality craftsmanship, Jeff and Baldwin Custom Painting provide bonded/insured, licensed, and lead-safe certified services in residential painting, light commercial painting, and wood refinishing.White pigmented shellac is smooth and dries fast. It is stain-resistant and sands easily. Its smell dissipates quickly.
-
QuestionWhat if the stain isn't covering the stainable wood filler? It's lighter than the stain and I can see where all the holes and imperfections are. How do I correct this problem?Terry HeapsCommunity AnswerOld timer trick: Take a small blob of the filler and drip a few drops of the stain on it. Knead it together and apply.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Wood filler
- Putty knife
- Tack cloth
- Sandpaper
- Primer, optional
- Paint or wood stain, optional
- Paintbrush, optional
References
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ https://www.thisoldhouse.com/how-to/how-to-choose-and-use-wood-filler
- ↑ https://www.familyhandyman.com/carpentry/how-to-use-epoxy-on-wood-for-repairs/view-all/
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ https://www.thisoldhouse.com/how-to/how-to-choose-and-use-wood-filler
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ Jeff Baldwin. Residential Painter. Expert Interview. 1 March 2021.
- ↑ Jeff Baldwin. Residential Painter. Expert Interview. 1 March 2021.
- ↑ https://www.bobvila.com/articles/how-to-use-wood-filler/#.WfALqohrzIU
- ↑ Jeff Baldwin. Residential Painter. Expert Interview. 1 March 2021.
About This Article
Article Summary
X
To use a wood filler, start by sanding down the surface you want to repair and removing any debris, which can prevent the filler from sticking. Then, squeeze the filler out of the tube into the affected area, beginning at the deepest part of the hole or crack. Make sure to overfill the hole a little bit, since wood filler shrinks when it dries. Next, smooth out the area with a putty knife before leaving the filler to dry for several hours. Finally, sand down the area until it's smooth and even. For tips on how to paint your wood after applying the filler, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 125,381 times.
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
