PDF download Download Article PDF download Download Article

If you're trying to lose weight, how can you track your progress if you don't have a scale at home? Even though a scale makes it easier to see your weight, it might be a little misleading as you build up muscle. Luckily, there are many other effective ways you can check your weight and body composition. Keep reading for at-home alternatives you can use instead of a scale and more accurate tests you can have done by your doctor.

How to Check Your Weight Without a Scale

  1. Measure your waistline with a flexible measuring tape.
  2. Use body calipers to do a skinfold test.
  3. Take before and after pictures to make comparisons.
  4. Put on old clothes to check if their fit has changed.
  5. Notice if you have more energy or if workouts are easier.
1

Measure your waistline.

PDF download Download Article
  1. Stand straight up and wrap a flexible measuring tape around your waist just above your hip bones. Make sure the tape measure is parallel to the floor and snug against your skin. Right after you take a deep breath out, check where the measuring tape overlaps to take an accurate measurement . [1]
    • Take your measurements every 2–4 weeks. [2]
    • Other common parts of your body you can measure include your bicep, chest, hips, and thighs. [3]
    • Taking your measurements is a better way to record your weight since your waistline gets smaller as you work out.
    • Since muscle weighs more than fat, only recording your weight may make it seem like you’re not making progress as you get more fit.
  2. Advertisement
2

Do a skinfold test with body calipers.

PDF download Download Article
  1. A pair of body calipers looks like a C-shaped clamp used to measure the folds of your skin. Use calipers to measure the skin on the back of your triceps, the front of your biceps, the inner edge of your shoulder blade, and the skin right above your hip bone.
    • Pinch the skin between your finger and thumb and clip the calipers on to take your measurements.
    • Position the jaws of the calipers about 1 4 1 2 inch (0.64–1.27 cm) from where you’re pinching the skin with your fingers.
    • Try taking the measurements 2–3 times to ensure you get an accurate read.
    • Body fat percentage depends on the sum of your measurements as well as your age and gender.
3

Take before and after pictures.

PDF download Download Article
  1. Take your photos shirtless or while you’re wearing tight athletic clothing since you’ll be able to see your progress better. Start with a picture where you’re looking directly into the camera, and take another picture of your side profile so you can compare a few different angles. [4]
    • Wait 1 month before you take pictures again to see if you’ve lost weight.
    • Wear the same clothes in each of your photos so the changes in your figure are more noticeable.
  2. Advertisement
6

Perform a water displacement test.

PDF download Download Article
  1. You may notice that the water level changes when you get in your bathtub, and that’s because your bodyweight displaces the water. [7] Fill a tub with water so you can submerge your entire body and mark the water level. After you hop in the tub, check how much the water level rose. You can get an estimate of your weight by calculating the change in volume .
    • This method usually works best for weighing smaller objects.
    • It’s tricky to measure your body weight with water displacement test since you need a tub deep enough to submerge your entire body without overflowing.
7

Add weights to a see-saw until it’s balanced.

PDF download Download Article
  1. Sit on one end of the see-saw and have a friend load weights or gallons of paint onto the other end. Once the see-saw is parallel to the ground, then the weight on the side is the same as your bodyweight. Check the amount of weight you needed to balance out the see-saw to know how much you weigh.
    • See-saws are basically large balance scales that will stay level if the weight is even on each side. [8]
    • This method might be a little impractical since you’ll have to take multiple weights to a park or playground to use a see-saw.
  2. Advertisement
8

Use bioelectrical impedance analysis (BIA).

PDF download Download Article
  1. Bioelectrical impedance analysis is a non-invasive test that sends a small unnoticeable current through your body. The current travels faster through lean body mass than it does through fat, so the test gives you a rough estimate of your body composition within a few minutes. [9]
    • BIA isn’t the most accurate since physical activity, hydration, and temperatures can affect the readings.
    • Getting a BIA from a doctor or weight specialist is the most accurate, but you can buy a scale with BIA technology to use at home.
10

Get a full-body DXA scan.

PDF download Download Article
  1. During a DXA scan, you’ll lie on a table and have 2 X-rays pass through your body to get the most accurate image of body fat compared to lean muscle mass. That way, you’ll be able to see the exact makeup of your body composition so it’s easier to track. [11]
    • You can get a DXA scan at a hospital or a university if they have the proper equipment.
    • DXA scans take around 10–15 minutes to complete.
    • You’ll get the most accurate results if you’re well-hydrated and haven’t eaten within 3 hours of the scan. [12]

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      • You may be able to find free scales you can use at a gym, pharmacy, or doctor’s office if you want a more accurate measurement of your weight.
      • Unfortunately, there aren't any scale apps you can use to measure your own weight with your phone. Fitness tracker and wellness apps can be helpful for monitoring weight loss, but you'll still have to use a scale to weigh yourself so you can log your weight in the app.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 97,052 times.

      Did this article help you?

      Advertisement