Download Article
Tools, materials, zoning laws, oh my! Everything you need to know about laying drainage pipes
Download Article
Are you finding water pooling on your lawn? Or maybe there’s a bit too much moisture for comfort around your home’s foundation. A French drain system could be the solution. It’s a simple yet versatile bit of landscaping that can be used to drain standing water from problem areas in your yard or around your home. It’s essentially a buried pipe that leads water down a slope. The construction process is fairly simple; it just requires a little preparation and planning, the right tools and materials, and a little DIY know-how. We’ll show you how to plan, dig, install, and maintain a French drain to keep your property free of any troublesome moisture.
Things You Should Know
- Identify any municipal pipes or cables on your property, and plan your drain to flow downhill and away from any structures.
- Dig a trench and line it with landscape fabric . Add gravel to the bottom of the trench before laying down your drain pipe .
- Cover the drain pipe in gravel, then fill in the rest of the trench with the displaced dirt you dug up before.
Steps
-
Scout for any buried pipes or electrical lines. Before building a French drain in a specific area, locate all underground cables, pipes or other installations that could make digging dangerous in that particular spot. Check with your municipal or public agencies to make sure you have a free area to construct your French drain. [1] X Trustworthy Source State of Massachusetts Official website for the State of Massachusetts Go to source- If you're in the U.S., call the 811 "Call before you dig" hotline, which will connect you to your local call center. An agent will come to your site within a few days to flag any underground hazards like municipal pipes or cables.
- Also be sure to plan your drainage route so it runs at least 1 m (3.3 ft) from any walls or fencing, and try to avoid any posts, shrubs or tree roots.
-
Call your municipality to check for zoning or runoff regulations. Some municipalities have rules on whether you can build or even dig on your own property, and may require that you obtain a permit before you build any sort of drainage. Speaking with city and/or county officials and working together is in your best interest for this project—better to know you’re in the clear now than get in legal trouble later. [2] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source- Also establish whether or not your French drain would cause hardship for neighbors in terms of groundwater runoff. Running excess water onto someone else's land could lead to a potential lawsuit.
- Ideally the French drain runs off in a relatively unused section of land, away from any buildings, into sandy soil which allows water to pass through easily.
Advertisement -
Mark the dig site on a downhill slope. French drains are essentially buried pipes that use gravity to carry water in the soil away from the problem area. Mark out the path of your proposed drain with landscaping paint , starting it at the problem area, routing it downhill, and ending it away from structures and heavily-trafficked zones. If no natural downward slope exists, create a slope by digging progressively deeper as you work your way along the trench. [3] X Research source- Sink a couple of stakes on far ends of the line and connect them with a string. Use a leveling tool to measure the grade of the string and slope—ideally, it’ll have a downhill grade of at least 1%, or a drop of 0.125 in (0.32 cm) per 1 ft (0.30 m).
- Never plan your French drain to drain into a neighboring property; it’s almost always illegal, and can pose numerous zoning issues and dangers, regardless.
- Optionally, hire a surveyor or other professional to help pin down the right dimensions and placement for your drain.
Advertisement
-
Dig a trench about 10–12 in (25–30 cm) wide and 1.5 ft (0.46 m) deep. Use a spade to dig a trench wide enough to accommodate the drain pipe, plus a bit of room on either side for gravel. Follow your marked route, taking care to avoid any flagged municipal pipes or cables. Enlist the help of a family member, friend, or neighbor if possible. [4] X Research source- Periodically check the depth of the trench as you dig to ensure it consistently slopes downwards. The ditch depth and grade doesn't have to be perfect, but ensure that there are no "bellies" in your drainage, or areas in which water can pool and be held.
- You might also rent a trencher from a hardware store, which is a specialized tool for digging trenches, or use a backhoe , but we recommend using a simple spade, since it’s the most precise and controllable tool.
- Periodically check the depth of the trench as you dig to ensure it consistently slopes downwards. The ditch depth and grade doesn't have to be perfect, but ensure that there are no "bellies" in your drainage, or areas in which water can pool and be held.
-
Line the trench with water-permeable landscape fabric. Roll out your landscape fabric over the trench, pressing it down to fill the contours, then temporarily pin it in place with nails or landscape fabric pins . Ensure the fabric extends about 1 ft (0.30 m) out of either side of the trench. [5] X Research source -
Add 2 or 3 inches (5.1 or 7.6 cm) of gravel to the bottom of the trench. Shovel the gravel on top of the landscaping fabric. The gravel acts as a foundation for the drainage pipe, keeping it securely in place, and also blocking soil from clogging the pipe. -
Lay drainage pipe with the perforations facing down, and cover it with gravel. Lay the drainage pipe atop the gravel along the entire length of the trench—ensuring that the perforations face down improves drainage. Then, cover the pipe with gravel, leaving about 2–3 in (5.1–7.6 cm) of room between the top of the gravel and the lip of the trench. [6] X Research source- Place a cap on the upper end of the pipe to prevent any soil or gravel from entering the pipe and clogging it downstream. [7] X Research source
- Alternatively, begin the length of pipe with a downspout catch to more effectively drain water from a targeted area.
-
Fold the landscaping fabric over the gravel and fill the trench with soil. Cover the gravel with the excess landscaping fabric. Fill in the rest of the trench with the displaced soil. [8] X Research source At this point, finish the trench in whatever way you like: lay sod on top, reseed it with grass, or even cover it with a layer of large, decorative stones.- The bottom end of the pipe will remain below ground, but alternatively, install a drain emitter for easy, above-ground access. Simply attach the emitter to the end of the pipe, and bury it so that its top surface is level with the ground.
Advertisement
-
Reinstall the French yard drain every 5-7 years. Your landscaping shifts over time, and the pipe, gravel, and landscaping fabric will deteriorate over the years. In order to keep the drain functioning properly, reinstall it every so often, or whenever it appears to stop working, like when water begins to pool in areas above the pipe, where it ought to be draining. [9] X Research source -
Keep heavy machinery and livestock off the French drain. Heavy machinery like cars, tractors, or riding lawn mowers can compress the soil and the drain pipe, damaging the French drain and causing clogs or other faults. [10] X Research source Leave indicators of the drain’s location for reference, like landscaping flags or lawn decor, to remind you and others of the drain’s location. -
Create a T-branch at the end of the drain for better water dispersal. A T-branch is simply another section of pipe that connects to the main pipe at a perpendicular angle. Dig an additional perpendicular trench at the bottom of the initial trench, and use a drain pipe connector to join the pipes. [11] X Research source- With this setup, the water forks off into the T-branch and is dispersed over a wider area, preventing pooling at the bottom of the French drain.
Advertisement
Community Q&A
Search
-
QuestionWhy are the holes of the pipe facing down? Wouldn't you want the water to filter into the pipe from the top holes and drain out from the bottom?Bill StaffenCommunity AnswerNo. The water travels to the lowest point in the gravel, which is beneath your pipe. If you put the holes on top, they would probably catch some of the draining water, but most of the water (considering the width of the trench vs. the holes) would actually begin pooling below the pipe. With the holes on the bottom, they are closer to the lowest point and therefore will catch more water because gravity will compel it toward the path of least resistance (in the pipe).
-
QuestionWhat kind of gravel should be used?Community AnswerWashed gravel. The fine sand/clay can clog up your freshly installed French drain.
-
QuestionHow do I unplug a stopped-up drain? Water is coming into the garage!Community AnswerYou'll need to find access points to the drain. Ideall,y both through the drain in your garage floor and wherever it drains to: the street, sewer, or drywell. You'll probably want to rent the smallest motorized snake (a roto-rooter type machine that has a couple small bits: paddle and screw) you can find to avoid damaging the pipes/drain tiles. Use the snake to go into the drain-line from every entrance you can. The more junctions, the less likely you'll clean it completely. Older homes will often have broken french drain pipes, either from age (with terra cotta or iron), or mechanical breakage (roots, digging, etc.).
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You’ll Need
Tips
- Spray the installed drain area with water to get it to settle or compact a bit.Thanks
- Use a good pair of leather work gloves while digging.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Never use a tamping tool or powered compacting equipment, as it will crush the pipe, causing failure.Thanks
Advertisement
Video
Expert Interview
Thanks for reading our article! If you’d like to learn more about french drains, check out our in-depth interview with David Balkan .
References
- ↑ https://www.mass.gov/guides/about-dig-safe
- ↑ https://www.epa.gov/nps/urban-runoff-model-ordinances-prevent-and-control-nonpoint-source-pollution
- ↑ https://extension.wsu.edu/clark/naturalresources/smallacreageprogram/improving-drainage/
- ↑ https://www.fairfaxcounty.gov/soil-water-conservation/drainage-problem-control-runoff
- ↑ https://www.fairfaxcounty.gov/soil-water-conservation/drainage-problem-control-runoff
- ↑ https://www.finegardening.com/article/build-a-french-drain-in-two-steps
- ↑ https://www.finegardening.com/article/build-a-french-drain-in-two-steps
- ↑ https://extension.wsu.edu/clark/naturalresources/smallacreageprogram/improving-drainage/
- ↑ https://www.nridgeville.org/FrenchDrain.aspx
About This Article
Article Summary
X
To build a French drain, choose a spot with a slight downhill slope, then dig a trench that is about 6 inches wide and 18 to 24 inches deep. Line the trench with water-permeable landscape fabric, leaving at least 10 inches of excess fabric on either side of the trench. Shovel in a layer of gravel along the bottom of the trench, then lay the perforated drain pipe into the trench on top of the gravel. Shovel more gravel over the pipe, then cover the gravel with the excess fabric and fill in the rest of the trench with soil. For more tips from our Professional Landscaper reviewer, including how to make sure your spot is safe to dig in, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 1,437,621 times.
Reader Success Stories
- "I just had a French Drain install. I am sick to my soul that I did not Google this article prior to having it done. It was very informative. I just found out that the company I hired scammed me by not following all the steps or telling me the proper steps, charged me more than necessary and used inferior product, a flexible perforated pipe instead of a plastic pipe as originally stated. Within a year's time the pipe they used will be blocked with weeds and if it is snaked will be destroyed. " ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I just had a French Drain install. I am sick to my soul that I did not Google this article prior to having it done. It was very informative. I just found out that the company I hired scammed me by not following all the steps or telling me the proper steps, charged me more than necessary and used inferior product, a flexible perforated pipe instead of a plastic pipe as originally stated. Within a year's time the pipe they used will be blocked with weeds and if it is snaked will be destroyed. "
..."
more
"I have water draining from my neighbour's property and I need to build a drain to direct it where it can soak away, rather than cause damage to my house. I had no idea how to do it before I read this article - great advice clearly laid out - thanks."
..."
more
"Informative for every skill level. Basic step-by -step instructions with pictures made this task easier and simple. My drain is over 200 feet from my back lot to the front, and is working great. Just wish I would've tackled this project sooner."
..."
more
"This article puts some knowledge that I already have into perspective. I knew about the gravel fill but not the pipe holes facing the bottom. Also that the filter material works all around the system. Very good article."
..."
more
"Article gave me the confidence to tackle the problem I have. Top tip was the pipe should face down, which is now obvious, but I wouldn't have put it in that way had I not seen the video. Thank you."
..."
more
