Download Article
Download Article
Before cleaning white mold, put on protective gloves, eyewear and a respirator. Then evaluate the area to determine how best to address the mold issue. Various cleaning agents can tackle mold , such as a simple dish detergent and water solution or a stronger method like diluted bleach. Regardless of which cleaning agent you choose, you’ll need to scrub the surface vigorously after letting the cleaning agent sit for five to ten minutes. Wipe down and rinse the area once finished, and repeat if needed.
Steps
-
Wear protective gear to evaluate and clean mold. Put on an N-95 respirator, which you can purchase online or from a hardware store. Follow the instructions that came with the respirator to ensure it fits properly. Wear goggles without ventilation holes. Put on long gloves that end at the middle of your forearms. [1] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
-
Test the substance with water to confirm that it’s white mold. Put some water in a spray bottle. Spray the substance and observe whether or not it dissolves. If it doesn’t dissolve, it’s probably white mold. If it does dissolve, it is another substance, such as efflorescence. [2] X Research source
- White mold can be confused with efflorescence, a mineral deposit caused by water seepage.
- White mold is usually found in cool and damp areas, such as basement walls. It appears white or light gray, like a coating of unsettled dust. Closer inspection under good lighting will reveal a fungal growth pattern of spots like tiny mushrooms. [3] X Research source We'll cover removing mold later.
Advertisement -
Turn off the HVAC system if there are signs of contamination. Look for mold near the intake for your heating/ventilation/air conditioning system. Check inside the air ducts for a musty smell or visible mold growth. [4] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
- If you don’t find any of these signs, and no one in your household has unexplained symptoms, illness or allergies, your air ducts are probably not contaminated.
- If you suspect or find signs of contamination in your HVAC system, don’t run it until you have the air ducts cleaned. [5] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
- It’s normal to find dust in return registers, which you can vacuum or remove to clean.
-
Call a professional mold removal service for serious mold growth. Consult with a professional if there’s a strong odor, damage from contaminated water, and/or areas of mold larger than ten square feet (three meters), approximately three feet by three feet (91 cm by 91 cm). [6] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source The area may need to be sealed off with plastic sheeting, while the HVAC is closed and sealed.
- For instance, a potent, moldy odor could mean there is unseen mold growth under flooring, behind walls or beneath baseboards.
- Read online reviews or get a referral for a qualified mold remediation contractor. You may be able to obtain a free estimate and report on what services are needed.
- If you hire a contractor, check their references first and ask them to follow current EPA recommendations or other professional guidelines.
Advertisement
-
Decide what to clean and what to throw out. Throw away disposable items, such as cardboard, if contaminated. Absorbent materials like carpet and ceiling tile with visible mold growth will be difficult or impossible to thoroughly clean, so you may want to replace them. Hard surfaces can usually be scrubbed with soapy water. [7] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
- Consult with a specialist if your item is expensive, has sentimental value, or if you’re unsure about the best way to clean it.
- If white mold is in your smoker or grill, follow the cleaning instructions that came with the product. For example, ceramic cookers should be cleaned with heat only, not chemicals or harsh scrubbers.
-
Ventilate the area, if needed. If you’re using bleach or another chemical agent, ventilate the area by opening the windows, if possible. If the mold is inside of a vehicle, park the vehicle in direct sunlight. Open the windows and doors, regardless of which cleaning agent you’re using. Let the vehicle air out for fifteen minutes or more before proceeding with cleaning. [8] X Research source
-
Clean mold with a mild detergent solution. Mix detergent and water to create a soapy solution effective for scrubbing mold from hard surfaces. [9] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source If your mold problem is fairly mild, this solution should get rid of it. For more serious mold growth, you may need to try a stronger chemical solution.
-
Try a chemical solution. Combine one part bleach to three parts water in a bucket. [10] X Research source Other options are a borax and water solution, a baking soda and water solution, 3% hydrogen peroxide, or undiluted, distilled white vinegar, any of which can be applied using a quart-sized spray bottle.
- If you’re using a strong disinfectant, such as bleach, wear safety goggles and gloves made from natural rubber, nitrile, neoprene, polyurethane or PVC. [11] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to source
- Spot test a small, inconspicuous area first, if desired, to ensure no damage occurs from your chosen cleaning agent.
- Don’t mix different cleaning agents, since they may not be compatible with each other. Never mix bleach with other chemical agents or products that contain ammonia.
-
Scrub the moldy area with your cleaning agent. Apply the solution to the area using a sponge or spray bottle. Let the cleaning agent sit for five to ten minutes. Use a scrub brush or old toothbrush to scour the mold. Wipe down the area with an old cloth or paper towel to remove the residual mold.
-
Rinse the area, if possible. If the area is a hard surface, use a sponge or spray bottle to rinse the area with water. Allow the area to dry. Visually inspect the dry area for signs of mold. If you suspect it hasn’t all been cleaned, repeat the scrubbing and rinsing process.
- We'll cover preventing mold later.
-
Clean fabric with vinegar. Opt for vinegar if the mold is on vehicle upholstery or carpeting, since it’s less likely to stain than chemical agents and doesn’t need to be rinsed off. Fill a quart-sized spray bottle with undiluted, distilled white vinegar. [12] X Research source
-
Clean white mold from a hot tub . Drain the tub and turn the power and circuit breaker off. Clean all surfaces, especially where there is visible mold. Remove the filter and either chemically clean or replace it. After refilling the hot tub, shock it (with a triple or quadruple dose), drain the tub, refill, shock it again (with a normal dose), then test the water for balance. [13] X Research source
Advertisement
-
Lessen the humidity. If you found the mold indoors, keep your home well-ventilated. Run air conditioners and dehumidifiers. Make sure large appliances are vented. Use vents or fans in humid rooms like kitchens and bathrooms. [14] X Research source
- Try keeping a window or door open while you’re showering. Run a dehumidifier, portable fan, or vent fan before, during and after taking a shower. [15] X Research source
-
Keep the area and items clean. Clean damp rooms like basements, kitchens and bathrooms regularly. If you notice soil or greasy film forming on surfaces, clean it right away. Keep clothing and fabrics washed, since clean fabrics are less likely to accumulate mold or mildew. [17] X Trustworthy Source University of Missouri Extension University of Missouri program dedicated to research-based, practical public education Go to source
-
Drive out warm, damp air with heat and an exhaust fan. Heat the house when you notice the air feeling or smelling damp, by turning on the central heat for a short time. Then open windows and doors while running an exhaust fan to force out the warm, damp air. If the area is small, such as a closet, use an electric light such as a 60- to 100-watt bulb continuously.
Advertisement
Expert Q&A
Search
-
QuestionIs bleach or vinegar better to kill mold?Jonathan Tavarez is a Cleaning Specialist based in Tampa, Florida. He is the Founder of Pro Housekeepers, a premium cleaning service catering to residential and commercial clients across the United States. Founded in 2015, Pro Housekeepers uses rigorous training methodologies to ensure high-quality cleaning standards. He has also since founded Germaphobix, a hygiene and sanitization product company, where he leveraged his expertise in the cleaning industry to make innovative products. Jonathan has over nine years of professional cleaning experience and has over six years of experience as the Communications Director for the United Nations Association, Tampa Bay. Jonathan earned a BS in Management and Marketing from the University of South Florida in 2012.Use bleach to clean white mold on non-porous surfaces, like ceramics, metals, and glass. Use a different cleaner, like vinegar, to clean white mold on porous surfaces, like wood, drywall, carpeting, or wallpaper.
-
QuestionHow do I kill mold?Jonathan Tavarez is a Cleaning Specialist based in Tampa, Florida. He is the Founder of Pro Housekeepers, a premium cleaning service catering to residential and commercial clients across the United States. Founded in 2015, Pro Housekeepers uses rigorous training methodologies to ensure high-quality cleaning standards. He has also since founded Germaphobix, a hygiene and sanitization product company, where he leveraged his expertise in the cleaning industry to make innovative products. Jonathan has over nine years of professional cleaning experience and has over six years of experience as the Communications Director for the United Nations Association, Tampa Bay. Jonathan earned a BS in Management and Marketing from the University of South Florida in 2012.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- It’s not possible to get rid of all mold indoors, but you can cut down on mold spores by controlling the moisture indoors. [18] X Research sourceThanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- It’s possible for cleaning agents to cause damage to surfaces. Perform a small test area first to ensure that no damage occurs.Thanks
- Consult with your physician before starting cleanup if you have health concerns, for instance allergies or respiratory problems. [19] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceThanks
- Don’t touch mold or mold-contaminated items with your bare hands. [20] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceThanks
- Although mold can be cleaned, it may cause permanent staining or cosmetic damage. [21] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceThanks
- Make sure to clean moldy surfaces before applying any paint or caulk. [22] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceThanks
Advertisement
Things You'll Need
- N-95 respirator
- Goggles without ventilation holes
- Long gloves
- Spray bottle or sponge
- Water
- Bucket
- Cleaning agent of choice
- Scrub brush
- Old cloths or paper towels
- Old clothing
References
- ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home#tab-4
- ↑ https://projects.truevalue.com/maintenance_and_repair/windows_and_walls/remove_mold_from_walls.aspx
- ↑ https://inspectapedia.com/mold/White_Mold_Pictures.php
- ↑ https://www.epa.gov/indoor-air-quality-iaq/should-you-have-air-ducts-your-home-cleaned#deciding
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
- ↑ https://wheelsguide.net/remove-mold-car-seats-interior/
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
- ↑ https://projects.truevalue.com/maintenance_and_repair/windows_and_walls/remove_mold_from_walls.aspx
- ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home#tab-4
- ↑ https://wheelsguide.net/remove-mold-car-seats-interior/
- ↑ https://www.swimuniversity.com/get-rid-white-water-mold-hot-tub/
- ↑ https://projects.truevalue.com/maintenance_and_repair/windows_and_walls/remove_mold_from_walls.aspx
- ↑ https://www.womansday.com/home/organizing-cleaning/tips/a1597/get-rid-of-mildew-for-good-107485/
- ↑ https://projects.truevalue.com/maintenance_and_repair/windows_and_walls/remove_mold_from_walls.aspx
- ↑ https://extension.missouri.edu/publications/gh5928
- ↑ https://projects.truevalue.com/maintenance_and_repair/windows_and_walls/remove_mold_from_walls.aspx
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
- ↑ https://www.epa.gov/mold/brief-guide-mold-moisture-and-your-home#tab-4
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
- ↑ https://www.epa.gov/mold/mold-cleanup-your-home
About This Article
Article Summary
X
White mold can be frustrating, but you can easily clean it with household supplies. It's important to wear protective gloves, goggles, and a respirator, since contact with white mold can make you sick. If your mold problem is relatively mild, use a detergent and water solution. For more serious mold problems, mix a solution of one part bleach with three parts water. For upholstery and carpets, use undiluted white vinegar instead. If you’re using bleach or a chemical agent, open the windows or turn on a fan to ventilate the room. You’ll want to apply the solution to the moldy area and leave it on for 5 to 10 minutes. Then, scrub the area with a brush and wipe it clean. Use an old cloth or paper towel to wipe away any leftover grime. For more tips from our Cleaning co-author, including how to prevent white mold in the future, read on.
Did this summary help you?
Thanks to all authors for creating a page that has been read 123,847 times.
Advertisement
95%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
