How to Protect a Wooden Post from Rotting in the Ground

PDF download Download Article
PDF download Download Article

Wooden posts that have been set directly into soil are likely to begin rotting as soon as their base absorbs some water. Once a wooden post has started rotting, your only option is to throw it away and sink a new post. Fortunately though, there are a few preventative steps you can take to ensure that your wooden posts won’t rot in the ground and that they’ll stand for years. Make sure to use a sturdy hardwood for your post, and treat the wood if it hasn’t already been treated. Then, if your post needs to support weight, you can bury its base in concrete.

Method 1
Method 1 of 3:

Selecting a Type of Lumber for Posts

PDF download Download Article
  1. While pine is not a particularly hard wood, it is very receptive to being treated and absorbs industrial treating chemicals well. Southern yellow pine is especially receptive to the chemicals. Other woods that aren’t as practical as southern pine only absorb the treating chemicals on their surface, leaving the interior of the wood untreated.
    • You should be able to find southern pine—or whatever other wood you choose to use—at a local hardware store or lumberyard.
  2. In swampy, marshy environments, fungi are one of the primary causes of post rot. Both black locust and eastern white cedar are naturally resistant to all types of fungus. [1] This makes them an ideal choice for posts that will be in damp ground. Cedar is also an ideal wood for fencing around your house as it is beautiful and has a long lifespan. [2]
    • Because cedar is high in demand, it’s also more expensive than, say, yellow pine.
    • If you live in a fairly arid environment, fungi may not be much of a concern for your posts.
    Advertisement
  3. Since these types of wood are naturally resistant to soaking up moisture, they’re a good choice of lumber for your posts. [3] Cypress in particular is noted for its color consistency, density, hardness, and relative lack of knots. These factors make it a superior wood to use for posts. [4]
    • However, although these woods are naturally adverse to soaking up water, they still need to be treated! Always buy treated redwood or cypress—or treat your own—to ensure that the posts stay rot-free for years.
  4. Lodge-pole pine is another wood to avoid selecting for your posts. Both of these woods have a structure that that makes them permeable to rot-causing moisture and bacteria. Additionally, pieces of Douglas fir and lodge-pole pine often contain sapwood, which is more prone to rotting than other types of wood. [5]
    • Douglas fir and lodge-pole pine are what’s known as “refractory” species of tree. They’re typically treated only by professionals, since treating them requires additional steps that can’t be performed at home.
    • For example, the lumber must be steamed to make it more receptive to the chemical wood preservatives that are then applied.
    5. Advertisement
Method 2
Method 2 of 3:

Choosing and Treating Wooden Posts

PDF download Download Article
  1. When you’re perusing the wood supply at a lumberyard, take a look at the end tag (a piece of paper stapled to the base of the post). It should say that the wood has been treated to the standards of either the International Code Commission (ICC), the American Wood Protection Association (AWPA), or the Canadian Standards Association. [6]
    • Woods that haven’t been pressure-treated will have a looser structure, making them more permeable to water, bacteria, insects, and other rot-causing agents.
  2. The 4A or 4B rating should be clearly marked on the lumber’s end tag. If the lumber has been treated by the AWPA, check for posts that have a UC 4A or UC 4B label. This indicates that the posts are intended for below-ground use. These posts are especially resistant to rot. [7]
    • If you need to cut one or more of these treated pieces of lumber to the size you’d like for your posts, make sure to re-treat the cut portion with a copper-naphthenate preservative.
    • Associations other than the AWPA don’t give their treated wood this type of rating.
  3. If you’ve purchased untreated wood—or if you cut your lumber to shorten it—you need to treat your post before burying it. Purchase a wood preservative that contains copper naphthenate at a lumberyard or hardware store. Pour about 1 ⁄ 2 litre (0.53  qt) of it into a large bucket. Set the end of your post that you’ll bury in the ground into the bucket and let it soak for 15–20 minutes. [8]
    • Giving your posts a thorough soaking in a wood preservative will go a long way in preventing them from rotting. [9]
  4. Keep the post in the bucket where it’s been soaking. Use a 3 in (7.6 cm) brush to apply a thick layer of wood preservative across the bottom 2 feet (0.61 m) of the post. Work in long vertical strokes. Let the post dry overnight before setting it in the earth. [10]
    • If you were to skip applying the wood preservative, you posts would likely begin to rot within 6 months, regardless of whether or not you set them in concrete.
    5. Advertisement
Method 3
Method 3 of 3:

Setting a Weight-Bearing Post in Concrete

PDF download Download Article
  1. Dig a hole that’s a quarter deep as your post is tall. For example, if you’ll be setting a post that’s 3 feet (0.91 m) deep, dig your hole to a depth of 3 ⁄ 4 foot (0.23 m). This will keep the post securely in the ground and prevent it from tipping over. While it’s entirely possible to dig a post hole with a shovel, a post-hole digger is a much better option. This tool digs a hole that’s only about 4 inches (10 cm) across, so you’re left with a post-sized hole that won’t need to be filled in much afterwards. [11]
    • Regardless of whether you’re using the post for a fence or a mailbox, remember that water causes rot. The best way to keep your post from rotting itself out of the ground is to sink it in cement.
  2. Use a shovel to pick up 3–4 generous scoops of gravel and deposit the material in the hole. Then use the shovel tip to pack the gravel down so there’s no extra space between the rocks. Placing a thick layer of loose gravel at the bottom of the post hole will allow groundwater to trickle through the rocks and down away from the base of the post. [12]
    • This will prevent the post from rotting by keeping it constantly dry.
    • You can purchase gravel at a local hardware store or landscaping-supply business.
  3. Mix a small batch of cement in a wheelbarrow or cement mixer. Use a cement mixture that contains small pea-gravel for a stronger hold. Open the bag and use your shovel to toss 3–4 large scoops of cement mix into a wheelbarrow. Then add water 1 cup (240 mL) at a time. Stir the cement mixture with your shovel every time you add water. The cement will have reached its ideal consistency when it’s roughly as thick as coarse mud. [13]
    • If you’re mixing in a cement mixer, you won’t need to stir with the shovel. Just flip the “on” switch and stand back while the machine spins for 5–8 minutes.
  4. Place the post into the hole so it rests on top of the gravel. Make sure that the treated side of the post is facing downward. Position the post in the exact center of the hole, so it will be surrounded by an even layer of cement on all sides. [14]
    • If you have a friend or family member nearby, ask them to help you with this step. The second person can hold the post upright while you move on to the next step.
  5. Use your shovel to scoop the wet cement into the hole. Periodically tamp the cement down by poking at it with the tip of the shovel. This will remove any unwanted air bubbles from the cement. Continue to fill the hole with cement until it’s level with the surrounding ground. Then, take a trowel and smooth off the top of the cement. [15]
    • If there’s any open ground between the cement and the top of the hole, your post will be vulnerable to soaking up moisture at that spot.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Do I need a vapor barrier if my ground contact lumber is going to be laid atop of the soil (not buried)?
    Community Answer
    Yes. This will stop the moisture transfer from the ground to the lumber, which could be the most common reason for wood rotting that has ground contact. The wood should still be treated against fungal attack (pressure treated is good).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 8
  • Question
    Should I put a plastic bag on the post before putting into concrete?
    Community Answer
    That's not necessary. Paint the entire wooden fence with a waterproofing sealant intended for exterior wood (such as decks and fences). You'll also paint the portion of the fence post that will be beneath the ground. You can use a garden sprayer to spray the wood sealant if preferred
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 13
  • Question
    Would letting some wood preservative run down the lower part of an already set post do any good? What about chlorine bleach, chlordane, insecticide or other options?
    Community Answer
    Definitely, don’t use bleach, chlordane, or insecticide. Regardless, if the post is already set, there’s nothing you can pour on the exposed part that would help in preservation. It would only preserve the above ground section of post that you apply it to.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 6
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You’ll Need

      • Copper-naphthenate preservative
      • Bucket
      • 3 in (7.6 cm) brush
      • Post-hole digger
      • Gravel
      • Cement mix
      • Water
      • Wheelbarrow
      • Cement mixer (optional)
      • Shovel
      • Trowel

      Tips

      • Avoid using wooden posts that are uncured. As the wood dries out, it will shrink. If the post is surrounded by concrete, a pit will form underneath your post. Water will collect here and contribute greatly to wood rot.
        Thanks
        Helpful 1 Not Helpful 0
      • Of course, one of the easiest ways to avoid having a rotting post on your hands is just to use a metal post instead. Metal is a much more durable material when building a fence or putting up a mailbox post. Although you will probably have to occasionally spray paint the post to keep it from rusting, you will likely never need to replace it.
        Thanks
        Helpful 0 Not Helpful 0
      • A metal post is worth considering if you don’t feel comfortable pouring cement or can’t find a sturdy hard wood post.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      Your Guide to Placing Fence Posts in the Ground
      How to
      Build a Wooden Gate
      How to
      Install an Electric Fence
      9 Inexpensive Ideas to Make Your Chain Link Fence More Private
      How to
      Build a Wood Fence
      How to
      Remove Fence Posts
      How to
      Straighten a Leaning Fence Post Yourself
      How to
      Make an Electric Fence
      How to
      Test an Electric Fence
      How to
      Dig Post Holes
      How to
      Replace a Fence Post in Concrete
      How to
      Remove a Chain Link Fence
      How to
      Frame and Install a Corrugated Metal Fence
      How to
      Cut Chain Link Fence
      Advertisement

      References

      1. ↑ https://garden.org/learn/articles/view/977/Naturally-Rot-Resistant-Woods/
      2. ↑ https://www.jlconline.com/deck-builder/protecting-fence-posts-from-rot_o
      3. ↑ https://www.woodmagazine.com/materials-guide/lumber/outdoor-lumber
      4. ↑ https://bct.eco.umass.edu/publications/articles/wood-myths-facts-and-fictions-about-wood/
      5. ↑ https://www.jlconline.com/deck-builder/protecting-fence-posts-from-rot_o
      6. ↑ https://www.jlconline.com/deck-builder/protecting-fence-posts-from-rot_o
      7. ↑ https://www.jlconline.com/deck-builder/protecting-fence-posts-from-rot_o
      8. ↑ https://frameitall.com/blogs/frame-it-all/prevent-fence-posts-from-rotting
      9. ↑ https://www.todayshomeowner.com/video/treating-treated-wood/
      1. ↑ https://frameitall.com/blogs/frame-it-all/prevent-fence-posts-from-rotting
      2. ↑ https://frameitall.com/blogs/frame-it-all/prevent-fence-posts-from-rotting
      3. ↑ https://www.familyhandyman.com/garden-structures/fences/how-to-set-fence-posts-that-won-t-rot/
      4. ↑ https://www.familyhandyman.com/garden-structures/fences/how-to-set-fence-posts-that-won-t-rot/
      5. ↑ https://www.familyhandyman.com/garden-structures/fences/how-to-set-fence-posts-that-won-t-rot/
      6. ↑ https://www.familyhandyman.com/garden-structures/fences/how-to-set-fence-posts-that-won-t-rot/
      7. https://www.todayshomeowner.com/video/how-to-reinforce-a-wooden-post-set-in-concrete/

      About This Article

      Article Summary X

      If you want to protect a wooden post from rotting in the ground, opt for wood that has been pressure-treated and has a 4A or 4B rating on the tag, as these woods are especially resistant to rot. To treat your post, soak the bottom foot for 15 to 20 minutes in a large bucket of wood preservative containing copper napthenate. After your post has soaked thoroughly, use a brush to apply a thick layer of preservative on the bottom 2 feet. Make sure to let the post dry overnight before setting it into the ground. For more tips, including how to protect your wooden post using cement, read on.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 413,169 times.

      Did this article help you?

      Advertisement