How to Use a Graphic Equalizer

PDF download Download Article
Everything you need to know about how a graphic equalizer works and how to get the best setting
PDF download Download Article

A graphic equalizer, more commonly known as an EQ, is used to change the frequency response of selected sounds, such as particular instruments or vocals in an audio track. It can be used to enhance the bass, reduce the treble, highlight a saxophone, or just make your audio sound better overall. EQs can be used in home audio or live sound. An EQ can be connected to audio equipment or physical hardware , or it may be a program on your computer. Once you get a handle on the basic operation of your EQ model, you can use it to make simple audio adjustments, then get into more detailed audio fine-tuning. This wikiHow article teaches you how to use a graphic equalizer.

Things You Should Know

  • Graphic equalizers have a series of sliders that control a frequency band within an audible range.
  • The 30 Hz slider on the left controls the low bass, while the 20 kHz slider on the right controls the high treble. The rest control the frequencies in the middle.
  • The best equalizer setting will vary depending on the sound or genre, as well as your audio equipment and the room you are in.
Method 1
Method 1 of 3:

Familiarizing Yourself with Your EQ

PDF download Download Article
  1. Each of the sliders is called a "band." Each band controls a specific frequency within a range of audible sounds. The 20 hertz (Hz) band controls the low end (bass), while the 20 kilohertz (kHz) controls the high end (treble). Your EQ will most likely have 20 Hz marked on its left side, and 20 kHz marked on the right. [1]
    • Between the low and high bands, an analog EQ will have a series of vertically-oriented (up-and-down) adjustment sliders. A digital EQ will have a series of marked points spaced out along the horizontal line.
    • These sliders or control points are often set at 30 Hz, 100 Hz, 1 kHz, 10 kHz, and 20 kHz. Some models allow you to alter these control point settings, while others are permanently fixed at these frequencies.
  2. “ Boost ” upward to intensify a frequency, and “cut” downward to reduce it. With an analog EQ, pushing a slider upward above the horizontal line “turns up” sounds within that frequency range—this is called boosting. Sliding downward “turns down” the sounds in that frequency range, known as cutting. [2]
    • With a digital EQ, you typically click on a control point and drag up to boost or down to cut.
    • For example, if you wanted to boost audio in the 100 Hz frequency range, you’d either push the 100 Hz slider upward (analog) or click and drag it upward (digital). Or, to cut the 1 kHz frequency range, you’d slide or click and drag down below the horizontal line.
    Advertisement
  3. Low and high pass filters allow you to block lower or high frequencies. For example, a low pass filter lets all frequencies below a certain bass frequency “pass-through” while blocking all frequencies above that frequency. A high-pass filter does the opposite. Some EQs have a built-in high and low pass setting. If they do not, you can set it yourself by lowering the high or low bands all the way down.
    • For example, you could use a low pass filter to block all frequencies above 10 kHz. To do so, you would leave the 10 Hz band and below at their normal levels, and then gradually cut the bands after the 10 Hz band down to zero. For a high pass filter, you would do the opposite on the other side of the EQ.
  4. When you boost or cut a particular frequency, you also want to boost surrounding frequencies to lesser degrees—for instance, when boosting 100 Hz, you also want to boosts 75 Hz and 125 Hz to lesser amounts. This is called the Q factor. A larger Q-factor boosts a smaller range of frequencies, while a smaller Q-factor boosts a larger range of frequencies. [3]
    • When boosting a range of frequencies, it's better to do this by boosting the bands in an arch shape, rather than boosting one particular band. For example, if you want to boost all frequencies between 40 Hz (low) and 10 kHz (high), you could do so by boosting the middle frequency (600 Hz) and then tapering off all the surrounding frequencies before and after 600 Hz. The range of the arch shape is the Q-factor. Some EQs let you manually enter the Q-factor range, while others make you adjust it manually.
    • If your EQ allows you to enter the frequency range, you can figure it out by subtracting the highest frequency from the lowest frequency. If your EQ allows you to enter the Q-factor, take the frequency range and divide it by the central frequency. For example, if you are boosting 400 Hz and you want the Q-factor to affect the ranges between 250 Hz and 550 Hz, you would subtract 250 from 550 hundred to get a range of 300. Then you would divide the range (300) by the central frequency (400) to get a Q-factor of .75.
    5. Advertisement
Method 2
Method 2 of 3:

Adjusting for Your Music and Listening Environment

PDF download Download Article
  1. Many stereos, TVs, audio players, and other devices with digital EQ capabilities come with a set of predetermined audio adjustments based on music or audio genre. For instance, your stereo or music app may have presets for “rock,” “jazz,” “classical,” and so on. [4]
    • By selecting a preset, the various frequency control points will be “boosted” or “cut” to levels that are considered ideal for a particular type of music or audio.
    • Presets provide a quick way to improve the sound of the audio coming through your headphones, earbuds, or speakers.
    • Physical EQs don’t usually have presets, since you have to manually adjust the sliders yourself.
  2. Presets are far from perfect, and should be considered starting points. So many factors go into making music sound “just right”—with personal preference at the top of the list—that you should always consider tinkering with any presets. [5]
    • The ultimate goal for EQ adjustments is to make the audio sound as perfect as possible to your ears—so trust them! If your ears tell you that the bass needs boosted, adjust the lower frequencies no matter what the presets indicate.
  3. While personal preference is the number one factor in determining ideal audio, there are numerous other factors at play as well. These include—but aren’t limited to—the quality of your audio equipment, the size and shape of the room or space you’re in, atmospheric conditions, and ambient noises. [6]
    • For example, you may find that adding a new carpet and couch to your den alters how the "jazz" preset sounds on your home stereo. You may have to do some tinkering to get the sound right again.
  4. If you want to crank up the bass for your favorite rock album, your first instinct will be to boost the lower-end (for instance, 100 Hz) settings. However, you usually get better results by cutting the other settings and leaving the 100 Hz setting in a neutral position. [7]
    • Boosting is more likely to add distortions to the audio, especially if you boost a particular frequency range to a significant degree. Cutting is far less likely to cause distortions.
    • So, to crank up the bass at 100 Hz, leave it at neutral (or only slightly boosted), and cut the sub-bass at 30 Hz and mid-range sounds at 1 kHz.
    • Use a light touch. Only boost or cut frequencies a couple of decibels.
  5. Fine-tuning your EQ settings is the best way to get the best audio for your circumstances. In a pinch, however, you might want to use a smartphone app that “learns” how you hear and makes adjustments for you. [8]
    • These apps usually start by giving you a short “hearing test” to determine how well you pick up different frequency ranges. It will then create custom-made presets that will automatically adjust based on the type of audio and other factors.
    • If you just want your music to sound “pretty good” whenever you put in your earbuds, this may be the best option for you.
    6. Advertisement
Method 3
Method 3 of 3:

Highlighting Different Instruments or Vocals

PDF download Download Article
  1. Once you’ve mastered the basics of adjusting the sliders or control points of your EQ, you can make fine adjustments to highlight particular instruments or vocals. With practice, you’ll know where in the frequency range to look for a particular instrument or vocal, but until then, rely on charts like the following: [9]
    • Female vocals: 150 Hz-1.6 kHz
    • Male vocals: 60 Hz-500 Hz
    • Saxophone: 100 Hz-700 Hz
    • Guitar: 70 Hz-1.1 kHz
    • Cymbals: 200 Hz-10 kHz
    • Kick drum: 60 Hz-4 kHz
    • Piano: 25 Hz-4.5 kHz
  2. Once you know which frequency range to search in to find a particular instrument or vocals, boost the slider or control point that’s closest to the center of that range. If doing so brings the sound of that instrument/vocal to the forefront, try boosting the surrounding ranges a little to see if that helps or hinders the process. [10]
    • You may have to do some searching by trial-and-error to find the instrument or vocal you’re looking to highlight, but keep at it—you will find it!
    • As an example, you might boost the 100 Hz setting in search of an electric guitar, and find that it helps to boost the 1 kHz setting as well.
  3. Once you’ve found the sound you want to emphasize, don’t just maintain a significant boost on the range or ranges where you found the sound. Instead, bring those ranges back closer to neutral and cut the ranges that carry other sounds that you don’t want to highlight. [11]
    • In other words: if you want to highlight the electric guitar, it’s better to “cut” the drums, saxophone, and vocals than it is to “boost” the electric guitar significantly.
    • Large “boosts” tend to cause audio distortions, which isn’t a problem with “cuts.”
  4. Narrowing the Q-range decreases the frequency range that is being boosted or cut, while widening it increases the range. This kind of fine-tuning can help you pinpoint the exact instrument or vocals that you want to highlight. [12]
    • Q-range is easier to visualize with a digital EQ. In this format, a boosted setting looks like a triangle or arch, with the apex representing the amount of the boost and the sloping sides representing the lesser boosting occuring at other surrounding frequencies. Narrowing the Q-range makes the triangle or arch “skinnier,” which means fewer surrounding frequencies are impacted; increasing Q-range does the opposite.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Which one is the mid?
    Community Answer
    On graphic equalizers, generally the center slider(s) control the midrange.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 13 Helpful 59
  • Question
    Can an equalizer be used as amplifier?
    Community Answer
    Not in the sense of making all of the audio more powerful, but you can create the illusion of a more powerful speaker system by changing the equalizer.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 45
  • Question
    Are there some presets for bass settings?
    Community Answer
    Yes, there are. Players with built-in equalizers typically have presets for many genres, some of which are very bass heavy. Of course, there is no such thing as one perfect preset. Every speaker and headset has its own equalization needs.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 45
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • Do not over EQ your audio. The equalizer can compensate somewhat for your audio equipment's shortcomings, but remember that professional engineers, with the input of the artist, have balanced the equalization before producing the recording.
        Thanks
        Helpful 3 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Start with your speaker volume at mid-range or lower before you start adjusting your EQ. Boosting frequencies while your speaker is at a high setting may cause damage to your speakers or to your hearing.
        Thanks
        Helpful 6 Not Helpful 0
      Advertisement

      You Might Also Like

      4 Easy & Fast Ways to Pair TOZO Earbuds
      How to
      Transfer Cassette Tape to Computer
      Simple Steps to Pair Skullcandy Wireless Earbuds with Any Device
      How to
      Connect a Computer to a Stereo System
      How to
      Clean Vintage Stereo Equipment: Step-by-Step Guide
      How to
      Clean a Cassette Deck
      How to
      Manually Rewind a Cassette Tape
      How to
      Record a CD to an Audio Cassette Using Amplifier
      Advertisement

      References

      1. ↑ https://www.digitaltrends.com/home-theater/eq-explainer/
      2. ↑ https://youtu.be/tsDfKk4YNrg?t=10
      3. ↑ https://www.electronics-notes.com/articles/basic_concepts/q-quality-factor/basics-tutorial-formula.php
      4. ↑ https://www.digitaltrends.com/home-theater/eq-explainer/
      5. ↑ https://www.musicianonamission.com/approach-equalization-two-types-eq/
      6. ↑ https://www.soundguys.com/how-to-equalize-fine-tune-your-listening-experience-16410/
      7. ↑ https://www.soundguys.com/how-to-equalize-fine-tune-your-listening-experience-16410/
      8. ↑ https://www.soundguys.com/how-to-equalize-fine-tune-your-listening-experience-16410/
      9. ↑ http://www.guitarbuilding.org/wp-content/uploads/2014/06/Instrument-Sound-EQ-Chart.pdf
      1. ↑ https://www.musicianonamission.com/approach-equalization-two-types-eq/
      2. ↑ https://www.musicianonamission.com/approach-equalization-two-types-eq/
      3. ↑ https://www.digitaltrends.com/home-theater/eq-explainer/

      About This Article

      Article Summary X

      To use a graphic equalizer, push the sliders up above the horizontal line to boost sounds within that frequency range. Similarly, push the sliders below the horizontal line to cut the sounds in that frequency range. For instance, if you want to turn up the bass in a song, push the lowest kilohertz slider upward. Alternatively, if there’s a saxophone solo you want to highlight, push the middle kilohertz sliders upward, and the kilohertz sliders on both ends downwards. While it may take some trial and error to get the sound you want, stick with it! Eventually you’ll find the perfect sound every time. To learn how to check your equalizer for presets, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 920,362 times.

      Reader Success Stories

      • Al Hutch

        Oct 22, 2016

        "I usually cranked the EQ right up with the bass as high as it could go (love that bass). Not such a good idea ..." more
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement