How to Clean a Headphone Jack on a Phone, Laptop, & More

PDF download Download Article
Easily clean dust or debris from your headphone jack or aux port
PDF download Download Article

Are you having issues connecting headphones to your phone or other electronic device? When your headphone jack is left uncovered in your bag or pocket, it can easily accumulate dirt and lint. Without proper cleaning, you eventually may not be able to plug in your headphones . Headphone jacks and aux ports on stereos can be cleaned quickly and safely. Compressed air blows out debris, but you can also use a cotton swab for tough debris or a taped paperclip to remove lint. We'll walk you through 4 incredibly easy ways to clean your headphone jack.

Method 1
Method 1 of 4:

Cotton Swabs

PDF download Download Article
  1. Cotton swabs, also known as Q-tips , are easy to find in any store where health and beauty products are sold. Try to get swabs that don't look very fluffy so the cotton isn't left behind in the jack or port. Swabs with thinner tips work better because they are easier to fit inside the jack.
    • Make sure your device is powered off before you continue.
  2. On one end of the swab, begin tearing or cutting off cotton from the tip. Make the tip as close to the width of the swab's middle portion as possible. Once the swab tip is this size, it should fit comfortably inside the jack.
    Advertisement
  3. Don't jam the swab into the jack. Slowly push it in until it rests inside the hole. Spin the swab to brush off all sides of the jack. Remove the swab and most debris will fall out. [1]
  4. For difficult debris, you can dip the swab in some rubbing alcohol. Make sure the swab is lightly coated, not soaked or dripping. Squeeze out excess moisture with a tissue or cloth first. Put the swab back inside the jack and spin it again.
    • Rubbing alcohol can corrode the metal, so use it sparingly. You may want to let it sit and dry for a few minutes before putting it back in the jack.
  5. The rubbing alcohol should dry quickly on its own. However, you can remove excess moisture to minimize the jack's exposure. Stick a clean swab into the jack. Leave it in there for a moment and spin it around to collect the alcohol.
    • Wait at least an hour before powering your device back on.
    6. Advertisement
Method 2
Method 2 of 4:

Compressed Air

PDF download Download Article
  1. Compressed air, which can be found at electronics, office supplies, or computer stores, is used for clearing debris from computer parts and keyboards . Air is least likely to damage your jack since you don't have to put anything inside the hole other than the air.
  2. Get the air dispensing opening right up next to the jack. Some bottles come with thin straws that stick out from the can. These may be easier for you to use since you can point the tube directly at the jack and focus the air into the small opening.
  3. Press the button on the top of the can to start dispensing air. You should only need a blast or two to loosen most debris inside the jack. Make sure all it comes out of the hole. [2]
    4. Advertisement
Method 3
Method 3 of 4:

A Taped Paperclip

PDF download Download Article
  1. Open up a paper clip so that one end is straight. Once straight, the paper clip can be used to scrape out debris. But since the metal can scratch the inside of the jack, you should never simply insert it into the port.
    • A toothpick can also be used, but the pointed ends can also scratch the jack's interior.
    • Needles are useful for reaching lint and large debris but can easily scratch the jack. Only use a needle as a last resort.
  2. Use standard office tape (like Scotch or Sellotape). Tightly wrap the tape sticky side up around the straightened end of the paperclip. Before use, check to see that the tape is secure and won't come off. [3]
  3. Slowly move the tape into position. Don't jam it in there. Reach for any debris you see. The tape forms a lint roller and will remove stuck debris and lint.
    • After cleaning out the headphone jack with a taped paperclip, you may want to clean it out with a cotton swab, just for good measure.
    4. Advertisement
Method 4
Method 4 of 4:

An Interdental Brush

PDF download Download Article
  1. These are small dental brushes with bristles on all sides of the tip which are typically used for cleaning braces . You can buy them at any drug store or health and beauty supply store.
    • This can be useful for removing any corroded metal or rust that has accumulated on the inside of your headphone jack.
    • Make sure your device is turned off before inserting a brush or anything dipped in alcohol.
  2. To do so, dip the brush in some rubbing alcohol and then tap it a few times to remove excess alcohol. It should be damp but not soaking wet. If it is too wet, ring it out with a cloth or tissue.
  3. Don't ram it in. Make sure you insert it gently as far as it will go. Then rotate it to loosen any debris left on the inside.
  4. Go ahead and reinsert the brush into the headphone jack and twist it a few times to make sure all the debris is cleaned out.
    • Be sure to wait at least an hour before powering your device back on.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I tried almost all of these and my phone is still in headphone mode. What do I do?
    Community Answer
    If nothing is working, you should consult the technical support department of your phone's manufacturer. There may be something easy they can do to fix it, or you may need to upgrade your phone.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 33 Helpful 35
  • Question
    I tried everything but it won't connect my earphone. What do I do?
    Rudy Toth
    Community Answer
    You need to get yourself a can of compressed air along with good ventilation in the room to clean out the headphone jack connector. There also adaptors that connect to the primary jack to bring down the size to 3.5mm jacks being a female adapter. Radio Shack use to sell these but, since RS is no longer in business. You need to seek them elsewhere on line maybe to obtain which are cheap and reliable.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 16 Helpful 6
  • Question
    My headphones sort of bounce out of the headphone jack, and sound stops or comes out of the phone itself sometimes, instead of the headphones. Is it a dirty headphone jack or a problem with the phone?
    Robert Lupas
    Community Answer
    It can be either a dirty headphone jack or a problem with the phone. First, try to clean it using this tutorial. Then, if it still doesn't work, it might be a problem with the phone. Try scanning the phone for viruses (they can affect the sound output) and try hard rebooting it or even doing a total reset. If the problem is still unsolved, take it to get a professional service done.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 22 Helpful 4
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Be gentle and minimal when putting anything inside the jack. The metal can easily be scratched or corroded.
        Thanks
        Helpful 2 Not Helpful 1


      Advertisement

      Things You'll Need

      • Compressed air
      • Cotton swabs
      • Paperclip
      • Office tape
      • Rubbing alcohol
      • Interdental brush

      You Might Also Like

      How to
      Pair Mismatched AirPods with One Case, Plus Troubleshooting
      3 Simple Ways to Locate Your Lost Dead AirPods
      How to
      Get Rid of a Headphone Dent (And Prevent a Future One)
      How to
      Fix Earphones when One Side Is Silent
      How to
      Tell if AirPods Pro Are Charging: Battery Status & More
      How to
      Fix Water Damaged Airpods
      AirPods or Case Blinking Orange Light? Here's How to Fix It
      Easy Ways to Tell if Sony Headphones Are Fake or Authentic
      How to
      Connect AirPods to a Lenovo Laptop: Easy Pair Guide
      Easy Ways to Reset Astro A50 Headphones
      How to
      Update and Check the Firmware on Your AirPods
      10 Easy Ways to Keep Earbuds from Falling Out of Your Ears
      15 Ways to Fix AirPods Not Playing Sound when Connected
      How to
      Connect a HyperX Cloud Headset
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about cleaning, check out our in-depth interview with Florisa-Leila Ramos .

      References

      1. ↑ https://www.gazelle.com/how-to/iphone/how-to-clean-an-iphones-headphone-jack
      2. ↑ https://www.gazelle.com/how-to/iphone/how-to-clean-an-iphones-headphone-jack
      3. ↑ https://www.gazelle.com/how-to/iphone/how-to-clean-an-iphones-headphone-jack

      About This Article

      Article Summary X

      1. Use compressed air to blow out any dust and debris with a couple blasts of air directly into the headphone jack.
      2. Power off the device.
      3. Use a cotton swap lightly coated with rubbing alcohol to gently swab the inside of the jack.
      4. Use a paperclip with tape wrapped around the end to get stubborn lint and debris out.
      5. Use an interdental brush lightly coated in rubbing alcohol to brush out any rust or corrosion from the inside.
      6. Wait at least an hour before powering your device back on.
      To learn how to use compressed air or a taped paper clip to clean your headphone jack, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 276,902 times.

      Is this article up to date?

      Advertisement