How to Fix Violin Pegs That Slip

PDF download Download Article
PDF download Download Article

Nothing is more frustrating during a practice session or performance than constantly having to retune your violin strings because of a loose peg. How can you fix this problem for good? Most of the time, the answer is as simple as rewinding the affected string or rubbing peg compound on the problematic peg. We’ve put together a step-by-step guide to both of these solutions, plus more tips on how to keep your pegs in good shape. If you’re ready to tighten your loose pegs once and for all, keep scrolling!

Things You Should Know

  • Rewind the string on a loose peg so that it coils towards the head of the peg. This provides the tension needed to keep the peg in place while you play.
  • Apply peg compound to problematic loose pegs. Peg compound is a substance that both lubricates and provides friction to the peg.
  • Gently push the peg inwards while you turn it to secure it in the pegbox holes. Be careful not to apply too much pressure, as the violin or peg could break.
Method 1
Method 1 of 3:

Rewinding the String on the Peg

PDF download Download Article
  1. Lift it slightly at the neck of the violin to separate it from the other 3 strings and take up the slack. To keep the soundpost and the bridge aligned, only adjust one string and peg at a time. [1]
    • Hold the violin vertically in your lap when you do this.
  2. To loosen a peg, turn it away from the scroll. To tighten a string, turn the peg toward the scroll.
    • Turn the A and E strings counterclockwise or the D and G strings clockwise to loosen them. [2]
    Advertisement
  3. Gently pull the string with your finger toward the side of the violin where the loose peg is sticking out. Pull until the string is slightly taut, but not so hard that you risk unraveling the string from the peg or breaking it. [3]
    • If you’re fixing the A or E string, pull to the right of the violin neck. Pull to the left for the G or D string.
  4. Turn the peg towards the scroll to increase tension on the loose string. Maintain your outward tug on the string while you turn the peg so the coils move closer and closer to the wall of the pegbox (near the peg head). [4]
    • Wind until the string can stay taut without you having to support it with your finger anymore.
    • When the string is coiled against the wall of the pegbox, it provides the tension needed to hold the peg in place and prevent it from slipping.
    • Push inward while you turn the peg to help it grip the edges of the pegbox holes. [5]
  5. Tune the string and check the peg’s stability. Put the violin on your shoulder and bow the string you just rewound while you turn the peg towards the scroll. Gradually tighten the string to raise the pitch until the string is in tune (turn the peg away from the scroll to loosen it, and turn it toward the scroll to tighten it). Check the pitch with an electronic tuner . [6]
    • If the tension in the peg is restored, the pitch will hold constant while you play.
    • The standard pitch for each string is: [7]
      • G string (G3): 196 Hz
      • D string (D4): 293.66 Hz
      • A string (A4): 440 Hz
      • E string (E5): 659.26 Hz
    6. Advertisement
Method 2
Method 2 of 3:

Applying Peg Compound

PDF download Download Article
  1. Turn the peg counterclockwise (away from the scroll) to loosen the A and E strings, or clockwise (away from the scroll) to loosen the G and D strings. [8] Slide the string out of the hole in the peg, then slide the peg out of the pegbox. [9]
    • Check the peg for damage once it’s out—if it’s cracked or warped, you’ll need a replacement.
    • Wipe the peg clean with a dry cloth to remove any grease or buildup that might be causing it to slip. [10]
  2. Rub peg compound on the parts of the peg that contact the pegbox. Look at the peg—there should be 2 shiny rings that indicate where the peg rubs against the wood of the pegbox. Rub a small amount of compound on these rings, making sure to lightly cover the peg all the way around. [11]
    • Peg compound often looks like a tube of chapstick. Remove the cap and twist the bottom of the tube to apply it.
    • Some players use pencil lead, peg dope, wax, chalk, or rosin in place of compound for a quick fix, but these can be too abrasive and damage your peg or pegbox. [12]
    • If there are no shiny rings around the peg, that means it is not a good fit for the peg hole and should be replaced.
  3. Spin the peg in either direction a few times to make sure it turns smoothly and to evenly coat the compound around the peg. Wipe away any excess compound before restringing the peg. [13]
  4. Restring and tighten the peg. Thread the end of the string through the small hole in the shaft of the peg. Continue winding the string towards the peg head so that it wraps up primarily against the wall of the peg box. This will help maintain tension on the peg. Wind until the string is taut and close to its final tension, and then push the peg gently inward as you turn the pegs in the hole. [14]
  5. Tune the string to test if the peg will stick. Put the violin on your shoulder and bow the string you just restrung. Gradually tighten the string by turning the peg clockwise (A and E string) or counterclockwise (G and D string) until the string resonates at the proper pitch. Use an electric tuner to check the pitch. [15]
    • If the peg is secure, the pitch on the string will remain largely constant throughout the day.
    • The standard pitch for each string is: [16]
      • G string (G3): 196 Hz
      • D string (D4): 293.66 Hz
      • A string (A4): 440 Hz
      • E string (E5): 659.26 Hz
  6. Apply peg drops in place of compound for a quick fix. To apply, unwind the loose peg and remove the string. Take the peg out of the pegbox and add a drop or two to the spots where the peg contacts the pegbox. [17]
    • Reinsert the peg and turn it a few times to evenly distribute the drops.
    • Wipe away any extra liquid on the peg, and be careful not to let the drops get on the varnish of your instrument.
    7. Advertisement
Method 3
Method 3 of 3:

Maintaining Secure Pegs

PDF download Download Article
  1. Since pegs are slightly conical, the solution might be as simple as pushing the peg deeper into the pegbox. If you notice a peg slipping, grip it securely and push inward into the scroll while you turn it. [18]
    • If needed, rest the head of the violin on a soft surface so you can apply more pressure to the peg while you turn it. [19]
    • Pushing inwards is a short-term solution to constantly slipping pegs. If the problem continues, apply compound or rewind the string.
    • Be careful not to push too hard.
  2. Excess grease or oil on the pegs will make them lose their friction. Simply remove the peg and wipe it down with a clean, dry cloth to degrease it. If you’ve previously applied products like peg compound, use a small amount of soapy water. [20]
    • If you use soapy water, wait for the peg to completely dry before you insert it back into the pegbox.
  3. When temperature and humidity increase, violin pegs swell and can get stuck. In cold, dry conditions, they’ll shrink and become loose. Store your violin indoors in a climate controlled environment to keep the pegs a consistent size. [21]
    • If needed, purchase a violin case humidifier to maintain the right conditions inside your case.
    • In a pinch, place a damp sponge in a plastic container inside your case to raise humidity.
  4. If the string isn’t slipping correctly over the nut and the bridge, it might lose tension even though the peg is secure and working correctly. To fix it, just grab a pencil and “draw” over the string grooves on the bridge and the nut. [22]
    • Graphite acts like a dry lubricant and will equalize the tension at all parts of the string.
    • Graphite also helps pegs that are too tight. Remove the peg from the pegbox and apply graphite to the shiny bands where the peg rubs against the pegbox.
    • Applying graphite is optional.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I loosened my G string by playing with the fine tuner. What do I do?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    If all you did was loosen the fine tuner, you can twist it again in the opposite direction to tighten up the string. If you're concerned that the string is not securely attached to the tailpiece, unscrew the fine tuner most of the way, remove the string from the tailpiece and peg, and restring it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If the pegbox, pegs, or peg holes are warped or cracked, take your violin to a luthier or repair shop to get new pegs or fix the scroll. [23]
        Thanks
        Helpful 0 Not Helpful 0
      • Use peg compound or similar products sparingly. Applying compound too often can result in a buildup of gunk on your pegs. [24]
        Thanks
        Helpful 0 Not Helpful 0
      • Only remove or unwind one peg at a time. Otherwise, you run the risk of losing tension on the bridge and causing it to tilt out of alignment.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Be careful not to push a loose peg too hard into the pegbox. This could cause the pegbox, neck, or scroll of the instrument to crack (which is a costly repair!). [25]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Use a Ratchet Strap
      How to
      Use a Light Timer
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Make a Smokeless Fire Pit
      How to
      Fix a Leaky Sink Trap
      How to
      Make a Drone
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Clean a USB C Charging Port
      How to
      Paint on Plastic
      How to
      Adjust a Lazy Susan
      How to
      Adjust a Furnace Gas Valve
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      Advertisement

      References

      1. ↑ https://www.connollymusic.com/stringovation/what-is-the-proper-way-to-string-an-instrument
      2. ↑ https://www.connollymusic.com/stringovation/how-to-tune-your-violin-with-the-pegs
      3. ↑ https://www.get-tuned.com/how-to-string-a-violin.php
      4. ↑ https://www.get-tuned.com/how-to-string-a-violin.php
      5. ↑ https://smartstringteacher.com/how-to-wind-strings-properly/
      6. ↑ https://www.connollymusic.com/stringovation/how-to-tune-your-violin-with-the-pegs
      7. ↑ https://www.get-tuned.com/how-to-tune-the-violin.php
      8. ↑ https://www.connollymusic.com/stringovation/how-to-tune-your-violin-with-the-pegs
      9. ↑ https://www.violaonline.com/instrumentcare.htm
      1. ↑ https://violintrend.com/my-violin-wont-stay-in-tune/
      2. ↑ https://www.violaonline.com/instrumentcare.htm
      3. ↑ https://www.violaonline.com/instrumentcare.htm
      4. ↑ https://www.violaonline.com/instrumentcare.htm
      5. ↑ https://www.get-tuned.com/how-to-string-a-violin.php
      6. ↑ https://www.connollymusic.com/stringovation/how-to-tune-your-violin-with-the-pegs
      7. ↑ https://www.get-tuned.com/how-to-tune-the-violin.php
      8. ↑ https://www.violaonline.com/instrumentcare.htm
      9. ↑ https://www.violaonline.com/instrumentcare.htm
      10. ↑ https://violintrend.com/my-violin-wont-stay-in-tune/
      11. ↑ https://violintrend.com/my-violin-wont-stay-in-tune/
      12. ↑ https://www.musicalexpert.org/what-are-violin-pegs.htm
      13. ↑ https://violintrend.com/my-violin-wont-stay-in-tune/
      14. ↑ https://violintrend.com/my-violin-wont-stay-in-tune/
      15. ↑ https://www.violaonline.com/instrumentcare.htm
      16. ↑ https://violintrend.com/my-violin-wont-stay-in-tune/

      About This Article

      Thanks to all authors for creating a page that has been read 42,727 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement