Download Article
Download Article
Window boxes are a beautiful way to add color and style to your home’s exterior. They are very versatile, as you can choose any color and plant that you prefer. They can even be a convenient addition to a kitchen if you use them to plant herbs or vegetables. To hang a window box on your home, you can use mounting brackets or vinyl siding hooks. Once you learn how to install your window boxes, they’ll stay secure on your house all year round.
Steps
-
Use a pencil and measuring tape to mark 1 inch (2.5 cm) from the bottom of the window. Make your pencil mark directly in line with the window frame. Do this on both sides of the window. This mark is where the top of the bracket will go. [1] X Research source
- If you have the type of window that swings out, measure and mark down 6 inches (15 cm) to 8 inches (20 cm) instead.
-
Fasten the mounting bracket onto the side of the house with a drill and screw. On your mounting bracket you will see 2-3 holes that your screws go in. Place the bracket under the window, right under your pencil mark. If there are 3 holes, use a drill to insert the screw into the middle hole on your bracket. (The top hole will be used later on to secure the box to the brackets.) If there are just 2 holes on your brackets, insert the screw into the top hole. [2] X Research source
- You should use a 3-inch (7.6 cm) galvanized decking screw.
- Be sure to attach the mounting bracket to the solid wood window frame—not the window trim. [3]
X
Expert Source
Emily Fazio
Home Improvement & DIY Specialist Expert Interview. 27 July 2021.
Advertisement -
Use a level to check that the bracket is straight. Before you enter your second screw, place a 2-foot (0.61 m) level next to your bracket to make sure that it is perfectly aligned and straight. This step is very important so that your window box doesn’t end up crooked on your window. [4] X Research source
- You’ll know your bracket is straight when the bubble on the level is centered between the lines on the tube.
-
Drill the second screw. Once you are certain that the box is level, drill your second nail into the bottom hole. This hole should be directly above where the window box will sit. [5] X Research source
- These screws will be hidden by the window box once you complete your install.
-
Install the second mounting bracket level with the first one. Place the second bracket under the window, right at the pencil mark you made on the other side of the window. This time, use a 4-foot (1.2 m) level to ensure that the two brackets are even. Then, repeat steps 2-3 to drill the holes in your bracket and fasten it in place. [6] X Research source
- When using the level, take note of where the bubble is located inside the tube. If the bubble is to the right of the lines, your window box will lean downward to the left. If the bubble is on the left of the lines, your window box will slope down to right. Make sure the bubble is directly in the center before you drill the nails.
-
Set the window box on the installed brackets. Now that your mounting brackets are attached and secure to the side of your house, you can place your window box on top of them! Make sure that the box is centered on the brackets. You can do this by using a measuring tape to measure the overhang of the brackets. For example, each side of the window box may hang 3 inches (7.6 cm) over the brackets. [7] X Research source
- If your window box has an angled side, make sure that is facing outward. It should be the front of your box.
-
Secure the window box to the brackets with a drill and 2.5 inch (6.4 cm) screws. You will need to fasten the box to the brackets, or it will easily fall off. Use the drill to insert galvanized decking screws that are 2.5 inches (6.4 cm) into the upper back of the box and the top of the mounting brackets. [8] X Research source
- Now you have completed the secure install and can fill and decorate your window box.
Advertisement
-
Purchase vinyl siding hooks. You should never drill holes or nail through vinyl siding. Your best option for hanging window boxes if your house exterior is made of vinyl siding is to buy hooks made especially for vinyl siding. This will prevent any damage to your house. You can buy these hooks at any home improvement or gardening store.
- Each vinyl siding hook will hold up to 12 pounds (5.4 kg) of weight, so keep that in mind when purchasing and filling your window boxes.
-
Install two vinyl siding hooks under your window. The great thing about vinyl siding hooks is that they do not require any tools to install. They work by placing the hook in between the siding panels. To do this, take the end of the hook that has a rounded shape and put it between the sidings just under the window. Gently wiggle it until you feel it snap into place.
- Keep in mind that these hooks will only work if your house has vinyl siding. It will not work on brick or stone house siding.
- Install at least two hooks per window box to ensure that the box is secure on the side of your house.
- Once you install your hooks, you will be able to easily move them around to adjust for the length of your window boxes. Just be careful that you do not scratch the surface of the siding.
-
Hang a metal window box on the vinyl siding hooks. Metal window boxes work best with vinyl siding hooks, because they typically have holes that will slide right onto the hooks. Make sure you distance the hooks so that they are on each end of the box. This will ensure that the weight is evenly distributed and the box is level.
- If you want to use a wooden window box, you can cut two slits in the back of the box where your hooks will fit.
Advertisement
-
Measure the width and height of your windows. You want to make sure your window box fits your window appropriately. Before you get started, measure your windows with a yardstick or tape measure. Choose a window box that spans the entire width of your window. [9] X Research source
- A window box that is too short will look off-balance, while one that is too long might make your house look too crowded.
- You should also consider the height of your window box. The height should be about 20-25 percent of the height of the window that you’re hanging it from.
-
Choose a window box that is at least 8 inches (20 cm) in depth and length. Your window box needs to be large enough to accommodate the plants you’ll be putting in them. Flowers and other plants need enough room to grow. [10] X Research source
- Larger window boxes, 1 foot (0.30 m) in depth and width, would be best if you want to include a lot of plants to fill out the box.
-
Find a window box with drainage holes. Plants grown in pots need drainage holes so that they don’t sit in wet soil. If the window boxes you purchase do not have holes, you will need to drill holes in the bottom before installing. [11] X Research source
-
Get a railing planter to further decorate your house exterior. Maybe you have some beautiful railings in front of your home, or a deck that you want to decorate with plants. You can always purchase a railing planter box. They come with hooks attached to the box, so you can easily hang them over a railing without any tools required. [12] X Research source
- Try to find planters with rubber or plastic coating. Metal brackets will scrape your railing and cause damage.
Advertisement
Community Q&A
Search
-
QuestionHow can I hang a window box on a brick building?Room ResolutionCommunity AnswerThere are several different methods, depending on the weight of the box and the look you're aiming for. Here are some general steps you can follow: Choose heavy-duty hardware. Position and mark holes. Drill pilot holes. Attach brackets or supports. Hang the window box. Secure the box to the brackets. Optional: Add extra support with L-brackets.
-
QuestionHow far below a window can you put a window box. I need to make windows look longer.Room ResolutionCommunity AnswerYou can hang a window box anywhere from just below the window sill to a few feet below, depending on your preference and the size of the window. To make your windows look longer, you might consider placing the window box closer to the bottom of the window frame or even extending it slightly below the bottom of the window. Just make sure the window box doesn't obstruct the window or any other features of the building. Experimenting with different placements can help you find the look that works best for your space.
-
QuestionWhat is a no drill way to attach a window box under a window of a brick house? The brick ledge is 3 inches.Ella.barozziniCommunity AnswerUse a hook mechanism that will allow you to hook the planter boxes onto the house without the need of power tools.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
References
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ Emily Fazio. Home Improvement & DIY Specialist. Expert Interview. 27 July 2021.
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ https://www.thisoldhouse.com/how-to/how-to-hang-window-box
- ↑ https://www.gardenista.com/posts/hardscaping-101-window-boxes/
About This Article
Thanks to all authors for creating a page that has been read 99,847 times.
Reader Success Stories
- "Thank you for clarifying how to install the window box. Most holders sold look like they go through the window to hang outside. That would require the window to always be open an inch. But you had a better, more secure way to attach the window box." ..." more
Advertisement