Steps
-
Decide what range of IP addresses you would like to use. You should use a "Private IP Range", otherwise you may well have problems related to traffic to and from your network being routed incorrectly. For a simple LAN, stick with 192.168.0.100, a subnet mask of 255.255.255.0, and a pool size of 50. This will allow up to 50 machines to be set up on your network without having to change anything.
-
Set the IP address of your computer to 192.168.0.2 with a subnet mask of 255.255.255.0 (an address in the same subnet as the addresses in the pool, but not an address in the pool itself! )Advertisement
-
Download tftpd32 from http://tftpd32.jounin.net/
-
Unzip the file to your computer and run tftpd32.exe.
-
Click Settings.
-
Select the DHCP tab in the Settings window.
-
Set the "IP pool starting address" to the address you want the first computer to use DHCP to have. (192.168.0.100 if you're not sure!)
-
Set the "Size of pool" to a little more than the number of computers and devices you think you'll need on your LAN. (if in doubt, 50 is a nice number)
-
Leave the "Boot File" field blank
-
Enter the IP address you gave the computer (192.168.0.2) in the field "Def. Router (Opt 3)
- If you have a DNS server on your network, or one accessible to the machines on your network, enter its IP address in the "WINS/DNS Server" box. If you don't or don't know what it means, leave it blank.
-
Set "Mask" to your subnet mask. If you don't know what that is, follow my addressing scheme and set it to 255.255.255.0
-
Leave the "Domain Name" and "Additional Option" boxes as they are.
-
Press "OK". Your DHCP server is now set up!
Advertisement
Community Q&A
Search
-
QuestionWhat should I put in the def router field?Community AnswerSet it as the same as your original IP address (in this example, 192.168.0.2). This will force your system to act as the default route for any clients connecting to it.
-
QuestionWhen setting up DHCP on a LAN will it interfere with other computers that are running on the network?Community AnswerIf other computers are set to obtain IP automatically, your DHCP server will serve those computers too, but will not interfere in any other way.
-
QuestionWhat would DHCP primarily be used for on a private LAN?Community AnswerIt would be used to assign IP address automatically to client computers and devices on the local network (tablets, phones, smart TVs, printers, etc.).
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If you want to create a large area network, you should use Windows Server 2008 or Windows Server 2012.Thanks
- If you don't know how to specify an IP address for your computer that runs the DHCP server, use one of the links here:Thanks
-
Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- If you don't know about private ranges and subnet masks, either read up on them or use my address scheme. Improper addressing can cause you, and possibly others, a BIG headache.Thanks
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 394,070 times.
Advertisement