A Step-by-Step Guide to Making an Indoor Turtle Pond

PDF download Download Article
How to build a safe, fun home for your pet turtle
PDF download Download Article

Turtles are becoming increasingly popular, but housing them can be difficult. Fish tanks do not provide them with the dry space they need and outdoor ponds expose them to threats from potential predators. If you have the space and the skills, building an indoor pond could be a great option for your turtle. Keep in mind the rule of thumb for the size is 10 gallons (37.9 L) per inch of shell. An indoor pond can be a decorative addition to your home and consists of a pre-formed pond that you can purchase in a variety of shapes and sizes, a basking area, and a frame.

How to Make an Indoor Aquatic Turtle Pond

  1. Choose a location and determine how big the pond should be.
  2. Purchase a surface mount pond or a water resistant liner.
  3. Cut and nail several 2x4s together to build the pond’s frame.
  4. Place the pond in the frame and fill it with water to check for leaks.
  5. Fill the pond with substrate and add a basking lamp for your turtle.
Part 1
Part 1 of 3:

Preparing for Construction

PDF download Download Article
  1. You will need to find a large space in the house to fit the tank. Measure it out to determine how much space you have available.
    • Try to find a place that will suffer less damage if there is any sort of leak, that is easy to clean, and where the turtle can reside for a long time. If possible, you should also pick a site that will allow your turtle to get some natural light.
  2. Keep in mind the amount of space for the location chosen in the house and that there will be a frame built for the pond to sit in, which will also serve as a basking/land area.
    Advertisement
  3. Surface mount ponds cost $30-$90 and are available for purchase online. You will want to purchase one slightly smaller than the space you have allotted for the pond, because you will also want to build a frame and basking area so that your turtle can leave the water occasionally. [1]
  4. If you prefer not to get a pond, you can also purchase a large, water resistant liner. There is, however, a slightly greater possibility that a turtle could use its claws to puncture a liner. [2]
    5. Advertisement
Part 2
Part 2 of 3:

Building the Pond

PDF download Download Article
  1. Purchase several two-by-fours verifying that they are all of the same dimensions. Use a miter gauge to cut the wood into the dimensions that you measured out. Set up a gauge block to the appropriate length so that all of your boards will be cut to the same length. [3]
    • You will need a large work space with proper tools for this work. A large garage is appropriate.
  2. Nail together beams to form two rectangles, one for the bottom and one for the top of the frame. Connect the two rectangles with support beams. Install one support beam for every foot of the perimeter of the rectangular frame. [4]
    • To bind the planks together, put wood glue on the edge and press together. Hold them together with bar clamps. Then nail several nails into the corner to hold them into place. [5]
  3. You will want to see how much wood is necessary to hold the lip and the bottom of the pond in place. Cut wood appropriately and nail into place along the rectangular frame.
  4. Fill with water to check for leaks and see how the pond fits in the frame. The pond may fit differently with water in it and adjustments may need to be made. Do not wait to fill pond with water until it is in the home. You can empty this water out before moving the pond into position. It is just to check for leaks.
  5. The basking area can be of any size or shape. You will want to ensure that the turtle does not fall off the landing. Nail in a wooden enclosure around the perimeter of the basking area. Hardware stores sell small fences that could be nailed into the edge of the landing. Be sure that the barrier is significantly taller than your turtle.
    • Providing an area for your turtles to bask is important. Turtles regulate their temperatures, elevate their metabolism and increase the efficiency for their immune and digestive systems by basking. [6]
    6. Advertisement
Part 3
Part 3 of 3:

Making the Pond a Home

PDF download Download Article
  1. Sand and fine gravel are generally considered the best substrates. Standard gravel can be dangerous because turtles are known to eat it. [7]
    • A deeper coral sand substrate can be substituted for soft-shell turtles. [8]
  2. You should provide some way for your turtle to walk up onto the basking area. Consider cutting a couple of two-by-fours and nailing them in to serve as a ramp. [9]
    • Alternatively hardware cloth or poultry netting can be attached to the pond, providing a ladder. [10]
    • Nailing shingles to the ramp can make it easier for your turtle to climb up. [11]
  3. In the outdoors, turtles leave the water to get into the warm sun. The lighting you provide serves as a substitute. You will want to make sure that the lighting is positioned correctly above the basking site.
    • A UVB 2.5 lamp is usually 12 inches (30.5 cm) above the basking site and a UVB 5 lamp is usually about 18 inches (46 cm) above the basking site. [12]
    • The basking area should only be 10 °F (−12 °C) warmer than the water temperature to encourage basking. Areas that are too hot may discourage the turtle from basking or risk exposing the turtle to hyperthermia. [13] Use a thermometer to check the temperature of the basking area and adjust the placement of the lamp accordingly. [14]
  4. To make the aquatic pond more homey, you can add artificial or live plants such as water lettuce, water hyacinth or duckweed. Decorations such as wooden logs or artificial rocks also provide a personal touch. [15]
    • Be mindful not to include any plants that turtles are allergic to. Some common plants that are toxic to turtles are: azalea, christmas rose, daffodil, iris, ivy, jimson weed, mistletoe, morning glory, nightshade, and tobacco. [16]
    5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • 2x4s
      • 4x4s
      • 1x1s
      • chicken wire or Plexiglas
      • 3 ⁄ 4 inch (1.9 cm) plywood or thicker
      • circular saw
      • hammer
      • drill
      • screws
      • nails
      • supplies needed to care for an aquatic turtle

      You Might Also Like

      How to
      Care for a Red Eared Slider Turtle
      How to
      Build a Vivarium
      How to
      Make a Terrarium
      How to
      Feed Your Turtle if It is Refusing to Eat
      How to
      Tell If a Turtle Is Male or Female
      How to
      Tell a Turtle's Age
      How to
      Care for a Hibernating Turtle
      How to
      Care for a Tortoise
      How to
      Tell a Tortoise's Age
      How to
      Take Care of a Baby Tortoise
      How to
      Sex Tortoises
      How to
      Know What to Feed a Turtle
      How to
      Care for Turtles
      How to
      Pet a Turtle
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about caring for reptiles, check out our in-depth interview with Anthony Menendez .

      References

      1. ↑ http://www.tortoisetrust.org/articles/smpond.html
      2. ↑ http://www.fishpondinfo.com/turtles/turpond.htm
      3. ↑ http://www.newwoodworker.com/basic/buildbox.html
      4. ↑ https://theturtleroom.com/blog/2013/09/04/diy-indoor-turtle-ponds/
      5. ↑ http://www.thisoldhouse.com/toh/how-to/step/0,,20165969_20381083,00.html
      6. ↑ http://www.redearslider.com/basking.html
      7. ↑ http://www.austinsturtlepage.com/Care/housing.htm
      8. ↑ http://www.tortoisetrust.org/articles/smpond.html
      9. ↑ http://www.redearslider.com/basking.html
      1. ↑ http://www.fishpondinfo.com/turtles/turpond.htm
      2. ↑ https://theturtleroom.com/blog/2012/05/11/building-a-nest-box-for-above-ground-ponds/
      3. ↑ http://www.myturtlecam.com/lighting.php
      4. ↑ http://www.redearslider.com/basking.html
      5. ↑ http://www.myturtlecam.com/lighting.php
      6. ↑ http://www.tortoisetrust.org/articles/smpond.html
      7. ↑ http://africantortoise.com/toxic_plants_and_flowers.htm

      About This Article

      Article Summary X

      To build an indoor aquatic turtle pond, start by finding an area in your home that's large enough to fit the pond and a basking area. Then, nail together 2 by 4 planks of wood to make a frame big enough to hold the pond. Next, place the pond in the frame and fill it with water to test for leaks. You should also put up a barrier around an area next to the pond so your turtle can bask when it's not in the water. Finally, fill the pond with a substrate, like sand or fine gravel, to make your turtle feel at home. For tips on how to build a ramp into the pond, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 146,514 times.

      Reader Success Stories

      • Caitlyn Lions

        Nov 22, 2016

        "This was seriously helpful! I only had one question about maintaining the pond and keeping it clean. I have two ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement