Download Article
Download Article
Nubuck is a type of leather made from cowhide. Like suede, it is sanded to create a nap. But while suede is made from the inside of the hide, nubuck is made from the outside, which is stronger and more durable. It is very vulnerable to soiling and staining, and must be cleaned and protected with tools and products that are specifically designed to care for suede and nubuck. It can also be sanded with a rough stone to remove stains when all else fails.
Steps
-
Wipe your nubuck item with a nubuck cloth. This type of cloth is specially designed for cleaning nubuck. Nubuck cleaner is typically integrated within its fibers. Wipe with this regularly to remove light soiling and shiny spots. This prevents grime from building up.
- Wipe in several directions, using circular motions to clean all sides of the nap.
- If cleaning shoes, make sure to remove the laces before starting.
-
Brush the surface with a nubuck brush. Use a circular motion, taking care not to spend more than a few seconds on any area, as this could damage the nap. This will clear the nubuck of dirt and grime.
- You can find nubuck brushes at most retailers who sell nubuck items. Alternatively, you can also purchase them online through websites like Amazon.
Advertisement -
Clean a particularly soiled area with a nubuck cleaner. These cleaners come in liquid and aerosol form, and are formulated for use on nubuck. Spray the cleaner onto a nubuck cloth and wipe the entirety of the surface. Finish by brushing the nap to remove any residue.
- Nubuck cleaners can be acquired from the same stores where you buy your nubuck items, such as your shoes and boots. Otherwise, you can find them online at various general retailers, like Amazon or Wal-Mart.
-
Wipe your nubuck routinely and apply a protectant. Regular wiping with a nubuck cloth will prevent you from having to resort to leather degreaser and leather cleaner. You should also apply a spray protectant at least every 6 months. Spray the item, then allow time for the nubuck to thoroughly dry before using or wearing it.
- The best time to spray this protectant is after cleaning your nubuck surface.
- Make sure to lift the nap before you apply protectant.
Advertisement
-
Start by wiping the stain with a nubuck cloth. No matter the substance that caused the stain, it’s crucial to wipe away whatever excess you can. For lighter stains, this might be sufficient.
- A nubuck cloth is specially designed for cleaning nubuck surfaces; nubuck cleaner is usually integrated in the cloth fibers.
-
Use leather degreaser and leather cleaner to loosen oily stains. These types of stains are usually found on jacket collars and upholstery headrests. Leather degreaser typically comes in aerosol form. Spray it onto the stain, and let it stand for about an hour.
- The leather degreaser will turn to a powder as it stands, soaking up the oil stain.
- Rub the powdery residue away with a sponge and leather cleaner.
- If the stain remains, repeat this process. [1] X Research source
-
Use an ink lifter for ink stains. It’s important to start cleaning the stain as quickly as possible before it sets, usually in the first 6 hours. Ink lifter is a greasy substance that typically comes in a tube, much like lip balm. [2] X Research source Rub the substance over the ink stain until it is completely covered. Then use a nubuck cloth and leather cleaner to wipe away whatever remains of the stain. [3] X Research source
-
Dry the nubuck with a blow dryer and brush with the nap. Brush as you dry the nubuck. This will keep any remaining stains from setting. Brushing the nap will remove any residue, keeping the surface clean.
Advertisement
-
Use a suede block or sandpaper to sand a nubuck surface. As nubuck is created by sanding cowhide, it can withstand sanding for cleaning purposes. For the toughest stains, rub them vigorously with sandpaper or a block until the stain is removed. If you only need to clean a specific stain, only sand that particular spot.
- Make sure the block is clean before starting to sand the nubuck.
-
Sand particularly soiled nubuck surfaces all over. If stains have settled in your nubuck surface, or it’s soiled all over, you’ll want to sand it completely. Run a block or sandpaper over its entire surface until the stains are removed. The nubuck will look practically brand new.
-
Use a nubuck brush to remove residue. As you sand the nubuck, you’ll be creating a fine dust composed of the leather and whatever grime it contained. Brush it away to keep your nubuck clear and clean.
Advertisement
Video
Expert Q&A
Search
-
QuestionCan I clean nubuck with water?Ryan Santos is a Cleaning Expert and the Operations Manager at Spekless Cleaning in Washington D.C. Ryan has over five years of experience in the cleaning industry and his team has extensive knowledge of apartment, commercial, and home cleaning services. He and his team also write blog posts and share cleaning tips based on their in-field experience. Spekless Cleaning is rated as the top cleaning company in Washington D.C.You can, but it's important to be really careful to not ruin the fabric. Mix equal parts white vinegar and water and dip a soft cloth into the solution. Gently rub the surface of the nubuck. Be sure to test the solution on a small, inconspicuous area of the nubuck first.
-
QuestionHow do you get gum out of nubuck?Ryan Santos is a Cleaning Expert and the Operations Manager at Spekless Cleaning in Washington D.C. Ryan has over five years of experience in the cleaning industry and his team has extensive knowledge of apartment, commercial, and home cleaning services. He and his team also write blog posts and share cleaning tips based on their in-field experience. Spekless Cleaning is rated as the top cleaning company in Washington D.C.It's easy, but you'll need a specific product called cleaning gum eraser, which can be found at most shoe stores. Just rub it over the nubuck surface to remove dirt and grime.
-
QuestionHow do I condition new hiking boots made of nubuck and goretex? Do I need to get the leather wet before applying the waterproofing product?Community AnswerYou don't need to wet nubuck before using a waterproofing product. Ensure the surface is clean and dry before using the product.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Consider buying a brush that has wire bristles in the center and nylon bristles surrounding them. Use the nylon bristles for gentle brushing on soft nubuck and the wire bristles when you need more vigorous brushing to clean hard nubuck items like hiking boots.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful with the napping brush. You can destroy nubuck nap if you brush too hard or too long in any one area.Thanks
- Never attempt to clean nubuck with water.Thanks
Advertisement
Expert Interview
Thanks for reading our article! If you'd like to learn more about cleaning nubuck items, check out our in-depth interview with Ryan Santos .
References
About This Article
Article Summary
X
To clean nubuck, apply leather degreaser or leather cleaner to any oily stains on the nubuck. Then, let the cleaner sit for 1 hour before rubbing it off with a sponge. To get ink stains off of nubuck, rub an ink lifter into the stain and then wipe it off with a cloth. For tough stains, you may need to use sand paper. Just rub the stains vigorously with the sandpaper until they come out. Because nubuck is sanded cowhide, it won't be damaged by the sandpaper. If you want to learn how to brush dirt off of your nubuck, keep reading the article!
Did this summary help you?
Thanks to all authors for creating a page that has been read 644,013 times.
Reader Success Stories
- "I bought steel-toed work boots, and decided to ride my motorcycle. The shifter left a black mark on the shoe, so I wanted to get it out before it looked too bad." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I bought steel-toed work boots, and decided to ride my motorcycle. The shifter left a black mark on the shoe, so I wanted to get it out before it looked too bad."
..."
more
"Gave several processes to clean and care for nubuck leather."
"Thanks to you, I have found a few clues!"
