How to Clean Pavers

PDF download Download Article
Everything you’ll need to get your pavers looking pristine again
PDF download Download Article

Paving stones, also called pavers, add a decorative element to any setting. Whether your pavers are used as a walkway through your garden, a patio, or driveway, your pavers are bound to lose their luster over time. Luckily, you can restore your pavers with a mild cleaning solution, stiff bristled broom, replacement sand, and sealer.

Part 1
Part 1 of 2:

Cleaning The Pavers

PDF download Download Article
  1. Depending on where your pavers are located, remove any potted plants or furniture that can get in the way of cleaning. [1] You want a clear surface free of obstacles while cleaning.
    • At this point, cover any surrounding landscaping with tarp that may be damaged by water or chemicals in the cleaning products. Be sure to also cover metal objects.
  2. Use a stiff bristled handheld brush or brush broom to agitate and brush away any moss growth on or in between pavers. [2] Gently pull weeds out in between paver joints. When all of the organic growth has been loosened, brush the debris off of your paved surface.
    • If the growth is too heavy to remove by hand, spray a vegetation killer and wait at least two weeks before cleaning the pavers.
    Advertisement
  3. Before you start cleaning the paver surface with soap or any other type of cleanser, hose down the entire area with water. You don’t need to power wash the area at this point; the pavers merely need to be wet so they don’t soak up the cleanser and form a murky film. [3]
  4. The safest and easiest cleanser to start with is a mixture of warm water and a mild degreaser detergent. [4] Fill up a gallon sized bucket with water and add about 16oz of dish detergent. Mix the soap into the water thoroughly. Once your cleaning solution is ready, gently pour some onto your paver surface, working in small areas at a time. [5]
  5. Use a stiff bristled broom to scrub the cleaning solution into the paver surface. [6] The harsh scrubbing from the broom bristles will loosen engrained dirt and stains. Scrub in different directions to avoid wearing out the same spot.
    • You may use a wire brush or scouring pad instead. Don't overdo it, as these tools can scratch the paver surface.
  6. Once you are finished scrubbing and cleaning your paver surface, gently rinse off the cleaning solution with clean water and into a nearby drain. [7] You can use a regular garden hose to rinse off the cleanser or use a power washer to blast off harsh stains.
    • However, power washers can sometimes cause more harm than good (by excavating sand in between paver joints), so be careful if you decide to use a power washer. [8]
  7. If detergent doesn't do the job, visit a home improvement store and look for a specialized cleaning product for your material (concrete, travertine, etc.). Many of these are highly corrosive and/or toxic, including TSP (trisodium phosphate) and muriatic acid. Read the warning label and make sure everyone in the area follows safety precautions. This may include wearing rubber boots, protective clothing, rubber gloves, mask, and safety glasses. Strong treatments can be a risk to children, pets, and vegetation, and may damage your pavers if used incorrectly.
  8. In most cases, the sand between the pavers is running low and needs a touch-up. Once the pavers are dry, pour a small mound of polymeric sand onto them. Sweep the sand all over on the paved surface with a dry, stiff bristled broom. [9] Brush in multiple directions for more even coverage. Keep pouring on more sand and sweeping until the joints are filled.
    • Polymeric sand locks the pavers together more effectively than regular sand.
  9. Once all the sand is spread out into the paver joints, use a mist setting on your hose to mist water over the pavers. [10] The misted water will allow the sand to settle in between the paver joints. Try not to saturate the pavers and wash away the newly laid sand.
    10. Advertisement
Part 2
Part 2 of 2:

Sealing The Pavers

PDF download Download Article
  1. Visit your local home improvement store to consult a specialist about what type of sealer you should use on your paved surface based on your paver material and your desired look. Sealer will protect your pavers and simplify upkeep.
    • Besides getting the advice of a specialist, always follow the directions on the sealer project you plan to use. Wear safety gloves to protect yourself from harsh chemicals in the sealant. [11]
  2. If the joints between the pavers are low on sand, add more sand as described above until they are well packed. If the pavers are damp, wait until they are completely dry before you begin sealing.
  3. Before you seal the entire surface, apply sealer to the edges with a small, clean brush. Do the same for any nooks that might be difficult to reach with a roller brush.
    EXPERT TIP

    Scott Johnson

    Landscape & Design Consultant
    Scott Johnson is the Owner and Lead Design Consultant for Concrete Creations, Inc., an award-winning landscape and design company based in the San Diego, California metro area. He has over 30 years of experience in the pool and landscape construction industry and specializes in large estate outdoor environment construction projects. His work has been featured in San Diego Home & Garden Magazine and on Pool Kings TV Show. He earned a BS degree in Construction Management with an emphasis in Architecture and CAD design from Northern Arizona University.
    Scott Johnson
    Landscape & Design Consultant

    Our Expert Agrees: Moss and weeds grow when water gets into the sand between your pavers. To keep that from happening, power wash the pavers to remove any dirt and oil, then treat them with a paver sealer to lock out moisture.

  4. Pour your paver sealer into a paint roller tin. Use a long roller brush to apply the sealer onto your paver surface. [12] Be sure to start in an area where you can move around and not trap yourself into a corner. [13]
    • The sealant instructions should indicate the drying time for the first coat of sealant, before the second coat can be applied.
  5. When the first coat of sealant is completely dry, start the second coat in the same way, using a small brush to cover the edges of the surface. Finish the second coat with a roller brush as before, but apply it at a different angle than the first coat for a more even application. When the pavers start darkening in color, that will indicate that the pavers are properly absorbing the sealant.
    • Try not to let the sealer puddle in any areas. If you see this happening, simply continue to spread out the sealer with your roller brush.
  6. Allow the sealant to dry completely for at least 24 hours before allowing traffic onto the surface. If you want to check on the drying progress, you can use your fingers to gently touch the paved surface.
  7. When the paver sealant is completely dry (after at least a full 24 hours), move back any furniture or potted plants. [14] You can also remove any tarp covering surrounding plants or metal surfaces.
    8. Advertisement

How Do I Clean and Maintain Pavers?


Community Q&A

Search
Add New Question
  • Question
    Can you use Dawn liquid detergent to clean pavers?
    Community Answer
    Yes, you sure can.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 60
  • Question
    How do I get rid of a cat litter coating on my pavers?
    Community Answer
    Scrub with Pine Sol for 23 minutes and wipe down with water. If you want more scrubbing, use a lot of soap and Pine Sol.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 5
  • Question
    How can I remove paint stain from pavers?
    Community Answer
    Scrub them with Clorox or dish soap until it fades.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 15
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Reader Videos

      Tips

      • Solving the problem of stained pavers may be as easy as simply flipping the paver so the reverse side is visible.
        Thanks
        Helpful 0 Not Helpful 0
      • Sprinkle an absorbent such as kitty litter or sawdust on oil stains. Wait a day, then hose off the absorbent.
        Thanks
        Helpful 0 Not Helpful 0
      • If only a few paving stones are badly stained, it may be easier to replace them.
        Thanks
        Helpful 0 Not Helpful 0

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • Apply a sealant to the pavers every few years to protect them from stains and weather damage. This also makes future cleaning easier.
      • For a more eco-friendly option, use vinegar, an effective cleaner for light stains and mildew.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Use cleansers with care if you have flowers, grass, or shrubbery growing around your pavers. Read the label to determine whether the product is safe to use in a garden environment.
        Thanks
        Helpful 4 Not Helpful 3
      Advertisement

      Things You'll Need

      • Garden hose
      • Pressure washer (optional)
      • Stiff bristled broom
      • Cleaning detergent
      • Gallon sized bucket
      • Paint roller
      • Paint roller tin
      • Sealant of choice
      • Joint filler sand
      • Stiff scrub brush

      If using harsh cleaners:

      • Rubber boots
      • Rubber gloves
      • Protective clothing
      • Mask
      • Safety glasses

      You Might Also Like

      How to
      Clean a Garden Sprayer
      How to
      Level the Ground for Pavers
      How to
      Install Asphalt
      How to
      Seal Pavers
      How to
      Make Pavers
      How to
      Grow Grass Between Pavers
      How to
      Maintain a Dirt or Gravel Drive or Road
      How to
      Cut Pavers
      How to
      Install Concrete Pavers
      When Is It Safe to Drive on Asphalt? Taking Care of Your New Driveway
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=cZi021egHdw
      2. ↑ https://www.youtube.com/watch?v=cZi021egHdw
      3. ↑ https://www.lovetoknow.com/home/cleaning/how-clean-brick
      4. ↑ http://www.diydoctor.org.uk/projects/cleanpave.htm
      5. ↑ https://www.youtube.com/watch?v=WElUX26LmQI
      6. ↑ https://www.youtube.com/watch?v=WElUX26LmQI
      7. ↑ http://www.diydoctor.org.uk/projects/cleanpave.htm
      8. ↑ https://www.youtube.com/watch?v=WElUX26LmQI
      9. ↑ https://www.youtube.com/watch?v=VI00-5p0r90
      1. ↑ https://www.youtube.com/watch?v=VI00-5p0r90
      2. ↑ https://www.youtube.com/watch?v=cZi021egHdw
      3. ↑ https://www.youtube.com/watch?v=cZi021egHdw
      4. ↑ https://www.youtube.com/watch?v=cZi021egHdw
      5. ↑ https://www.youtube.com/watch?v=cZi021egHdw

      About This Article

      Article Summary X

      To clean pavers, start by spraying the area down with a hose to saturate the stones with water. Next, make a solution of 1 gallon of water and 16 ounces of dish soap and pour some onto a small area of the pavers. Then, use a stiff bristled broom to scrub the soapy water into the paver surface and loosen ingrained dirt. Once you’ve scrubbed all the pavers, rinse the soap away with water from a garden hose or power washer. For tips from our Landscaping reviewer on how to re-sand between your pavers after you’ve cleaned them, keep reading.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 394,010 times.

      Reader Success Stories

      • Carolyn Woody

        May 18, 2016

        "The step-by-step instructions were clear and easily understood. Offered me a way to do it myself without expensive ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement