PDF download Download Article PDF download Download Article

When the weather is warm, there's nothing like barbecuing at home. But if you want your burgers, steaks, and chicken to taste delicious, it's important to keep your grill as clean as possible. When you have a stainless steel grill, it can sometimes be difficult to know how to clean it because it's so easy to damage the surface. Whether it's removing buildup from the stainless steel grate, keeping the interior clean, or buffing the stainless steel exterior, using the right products and techniques is key if you want to keep your grill looking and performing well.

Part 1
Part 1 of 3:

Scrubbing Stainless Grates

PDF download Download Article
  1. To make an effective cleanser to clean a stainless steel grill grate, add ¼ cup (45 g) of baking soda and ¼ cup (59 ml) of water to a small bowl. Mix the two together well to form a paste. [1]
    • It helps to mix the baking soda with warm water so the two blend more easily together.
  2. Once you’ve mixed up the baking soda paste, use clean hands or a rag to carefully apply it to the grill grate. Make sure to cover the entire surface, paying special attention to the dirtiest spots, and let the paste sit on the grate for at least 20 minutes. [2]
    • It’s best to remove the grate from the grill before you apply the paste. That will allow you to cover both sides so you don’t miss any spots.
    Advertisement
  3. If you haven’t cleaned your stainless steel grate in a while, it may need a more intense cleanser to freshen it. Apply a generous coat of oven cleaner spray over both sides of the grate. Place the grate inside a plastic garbage bag, and allow it to sit overnight. [3]
    • You can use the oven cleaner if the baking soda paste doesn't work. It's not necessary to do both unless your grate is extremely dirty and the baking soda leaves residue behind.
    • Any oven cleaner will work to clean the grate, but you may want to choose a cleanser that is designed for use on both ovens and grills.
  4. After you’ve let the baking soda paste or the oven cleaner sit on the grate for the designated time, use a wire grill brush designed for stainless steel to scrub the entire surface. Make sure to run the brush between and along the sides of the grate to remove all of the cooked-on residue.
    • Check your grill brush to make sure that it’s in good condition before using it. There shouldn’t be any bristles coming out.
  5. Once you’ve given the grate a good scrubbing with the brush, use your garden hose to spray it down with warm water. Make sure to remove all of the cleanser and dirt residue, and then dry the grate with a clean towel. Return it to the grill so you’re ready for the next barbecue.
    • If the grill grate is particularly dirty, you may need to repeat the cleaning process more than once to fully remove all of the dirt and food residue.
  6. When your stainless steel grill grate is clean, you’ll want to keep it that way. Allow the grill to cool down for 5 to 10 minutes after using it, but while it’s still warm, use your grill brush to scrub the grate down to remove any food debris.
    • To limit residue on the grate, always preheat your grill before placing food on it. That will help keep items from sticking to the grate.
    • Be sure to oil your food before placing it on the grate to help keep anything from sticking to the surface.
  7. Advertisement
Part 2
Part 2 of 3:

Maintaining the Grill’s Interior

PDF download Download Article
  1. The flame tamers sit directly on top of the burners to form a barrier between the burners and the grate. Food debris can sometimes build up on the tamers, so you should remove them and use a small, dry wire brush to remove any residue. Wipe them down with a clean piece of paper towel afterward.
    • Make sure that your grill is cool and not turned on before cleaning any of the interior components.
    • If you’re not sure where the flame tamers are in your grill, consult the owner’s manual. They are also sometimes known as heat tents or vaporizer bars.
  2. When you take out the flame tamers, the burners will be underneath. Food buildup on the burners can led to uneven heating and burner failure. Clean tube, flat, u-shape, and cast burners with a small, dry wire brush, paying special attention to the burner port area where the gas comes out.
    • If you have ceramic burners, don’t clean them with a brush. Turn the grill on for 10 minutes to burn off any food residue, and once the grill is turned off and cool, use tweezers to remove large food debris.
    • If you’re not sure what type of burners your grill has, consult the owner’s manual.
  3. The venturi tubes supply the gas to the burners, and can easily get dirty. Remove the entire burner assembly according to the instructions in the owner’s manual, and rub it and the tubes down with a cloth dampened with soapy water. Run a clean, damp cloth over the tube to rinse it.
    • The venturi tubes are narrow tubes that have a series of small holes along the sides and/or ends. They may be curved and connected to the the burner assembly, or they may be straight and easy to detach from the burner assembly.
    • Consult your owner's manual to see exactly what your grill's venturi tubes look like and where to locate them.
  4. Clogs in the venturi tube can cause your grill not to work properly, but it’s easy for insects and other debris to build up inside. Use a small wire brush to clean the holes on the tube to ensure that there aren’t any clogs before replacing the tube and burner assembly.
    • Consult the owner’s manual to determine the proper way to put the tube and assembly back. Your grill won’t work properly if it isn’t in place, and it can be very dangerous to lit the grill.
    • A paperclip or small piece of wire works well to clean the holes in the tube too.
    • You may want to run water from your garden hose through the tube to determine if there are any clogs.
  5. Advertisement
Part 3
Part 3 of 3:

Removing Dirt from the Grill’s Exterior

PDF download Download Article
  1. It’s best not to use stainless steel cleaners or polishes on the grill because they’re not designed to be used on surfaces that get very hot. Instead, fill a bucket with warm water and add some liquid dish detergent to create a warm, soapy solution. [4]
    • Never use an acidic or abrasive cleanser on stainless steel. They will damage the finish.
  2. Dampen a microfiber cleaning cloth with the soapy solution that you mixed. Run it over the entire surface of the grill’s exterior, making sure to rub with the grain of the stainless steel to avoid scratching it. [5]
    • Be sure to use a microfiber cloth to wash the stainless steel exterior. Other fabrics may scratch the finish.
  3. If there are stubborn areas where dirt is stuck on, wet a sponge in the soapy solution. Rub it over the areas, but be sure to move in the direction of the grain to prevent scratches in the stainless steel. [6]
    • While a soft sponge is fine to use on a stainless steel grill, don’t use a scouring pad or steel wool. They will scratch the surface.
  4. When you’ve finished cleaning the exterior of the grill, spray it down with your garden hose. Make sure to use warm water, though, to get all of the soapy residue off the stainless steel. [7]
  5. After you’ve rinsed off all the dirt and soapy, wipe down the grill with a towel to dry it. Use a microfiber cloth, though, and move in the direction of the grain for the best finish. [8]
    • When the grill is dry, you may want to follow up with stainless steel cleaner wipe to give it a more polished appearance.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you clean a stainless steel dishwasher or refrigerator?
    Susan Stocker
    Professional Cleaner
    Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices.
    Professional Cleaner
    Expert Answer
    Specialty stainless steel cleaners are the best option when it comes to deep cleaning a stainless steel appliance. For a basic cleaning, deionized water is the best way to wipe surface dust and dirt away. You can use olive oil to polish your stainless steel.
  • Question
    What scrubber should I get for a stainless steel flat grill?
    Community Answer
    Go to a hardware store and get a brick scrubber. It works really well; we use it in professional kitchens.
Ask a Question
      Advertisement

      Tips

      • Before using any cleaning products on your stainless steel grill, always consult the manufacturer’s instructions to ensure that they are safe for the surface.
      • While you should scrub down the grill’s grate after each use, you should give the grill a complete, deep cleaning at least twice a year. It’s a good idea to clean it at the end of the season, so the grill is ready to go for the next year.
      • You may want to invest in a cover for your grill. That will help keep it cleaner throughout the year.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • When taking your grill apart to clean it, always consult the manufacturer’s instructions. It can be very dangerous to use a grill if the parts aren’t in the proper placement.
      Advertisement

      Things You'll Need

      • ¼ cup (45 g) baking soda
      • ¼ cup (59 ml) water
      • Bowl
      • Spoon
      • Cloth
      • Oven and grill cleaner
      • Garbage bag
      • Wire grill brush for stainless steel
      • Clean towel
      • Small wire brush
      • Warm water
      • Liquid dish soap
      • Microfiber cloth
      • Sponge
      • Microfiber towel

      About This Article

      Article Summary X

      To clean a stainless steel grill, begin by removing the steel grate from the grill. Mix ¼ cup (45g) of baking soda and ¼ cup (59mL) of water in a small bowl to make a paste. Then, using a rag, apply the paste to the grate and let sit for at least 20 minutes. Afterwards, use a wire grill brush to scrub away all the cooked-on residue. Rinse the grate with water, dry with a clean towel, and return the grate to the grill. To clean the outside of the grill, mix liquid dish detergent and warm water in a bucket. With a microfiber cleaning cloth, wipe the mixture onto the grill’s exterior. If there are stubborn spots, use a sponge too. Then, rinse the outside with water and dry with another microfiber cloth. For more tips on how to maintain your grill’s interior, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 107,293 times.

      Did this article help you?

      Advertisement