Download Article
Sanitize your home gym weights with these easy methods
Download Article
If you use dumbbells, you know how much sweat, chalk, and dirt can build up after workouts. To maintain your dumbbells, it’s important to clean them regularly to remove bacteria and prevent rust. In this article, we’ll walk you step-by-step through cleaning all types of dumbbells, including rubber, vinyl, and iron. Plus, we’ll teach you how to remove rust from your dumbbells so they can look as good as new.
Things You Should Know
- Clean dumbbells by wiping them with soap and warm water. Don’t submerge them, as this causes rust.
- Dry most dumbbells with a clean cloth or towel instead of air drying to prevent rust. You can air-dry rubber dumbbells.
- Soak dumbbells in vinegar and water to loosen rust, then scrub the rest away with a wire brush.
Steps
-
Wipe or spray the dumbbells with soap and water. For neoprene or rubber dumbbells, fill a bowl or basin with warm water and a squirt of dish soap, then dip a soft cloth or sponge into the mixture and gently scrub the dumbbell. For vinyl dumbbells, fill a spray bottle with warm water and a drop or two of dish soap, then lightly spray the dumbbell and wipe it with a microfiber cloth. [1] X Research source
- Neoprene is a synthetic rubber that protects dumbbells from scratches and general damage. It has a smooth texture, and most dumbbells have the word “neoprene” molded into the rubber if they’re made of the material.
- Pay special attention to crevices and knurling when wiping the dumbbells.
- Avoid using harsh chemicals as they could damage the material of the dumbbells.
- Don’t soak or oversaturate vinyl dumbbells, as too much soap will damage the vinyl. A light mist will suffice.
-
Rinse and dry the dumbbells with a clean, damp cloth. Wipe the dumbbells to remove the soapy residue, then immediately dry them with a lint-free microfiber towel to prevent water spots and protect the material. [2] X Research source
- Do not allow neoprene or vinyl dumbbells to air dry. However, you can air dry rubber dumbbells if you prefer.
- Repeat this cleaning process weekly to remove grime build-up and keep the material supple.
- Weekly cleaning with soap and water should do a good job of removing bacteria, but you can also wipe the dumbbells down with alcohol-free disinfectant wipes after each workout to keep them extra clean.
Advertisement -
Apply protectant spray or rubber conditioner. Depending on the material of your dumbbells, spray or coat them with neoprene or vinyl protectant spray or rubber conditioner . This should typically be done once a month to maintain the dumbbells’ coating and repel dirt and oils. Follow the instructions provided with your protectant to correctly apply a thin coat. [3] X Research source
Advertisement
-
Remove the weight plates. Because the different parts of adjustable dumbbells are made of different materials, disassembling them before cleaning ensures you’ll be able to clean each part thoroughly.
-
Scrub the weight plates with soap and water. In a bucket or basin, mix a small amount of mild detergent with water. Dip a sponge or cloth into the water and gently scrub the weight plates, paying particular attention to stubborn areas. [4] X Research source
-
Wipe down the gripping bars. Use a sponge or cloth to clean the gripping bars with the soapy water. Make sure to clean the entire length of the bars, including the area where the weight plates attach. [5] X Research source
-
Rinse and dry all the parts. Rinse both the weight plates and the gripping bars with clean water, removing all the soapy residue. Then, thoroughly dry each piece with a clean, dry cloth to prevent rust and other moisture-related issues. [6] X Research source
-
Reassemble the dumbbells. Once everything is dry, reattach the weight plates to the handles. For regular maintenance, wash your dumbbells after every few workouts to prevent grime build-up, and wipe them down after each use to remove sweat and moisture.
Advertisement
-
Scrub the dumbbells with a wire brush and mild soap. Mix a few drops of dish soap with warm water to create a mild soap solution. Dip your wire brush into the mixture and scrub your dumbbell to remove chalk, sweat, and any other dirt or debris. [7] X Research source
- Chalk holds moisture and bacteria, so it’s important to remove it all when cleaning.
-
Wash and rinse with a damp, soapy cloth. After you’ve scrubbed away the visible chalk and dirt, dip a cloth into your soap solution and wipe down the dumbbells. Then, dampen another cloth with clean water to rinse off any soapy residue. Use another clean, dry cloth to dry the dumbbell. [8] X Research source
-
Disinfect the dumbbells with a cleaner or wipe. It’s best to use a product specifically made to clean gym equipment, but you can use any EPA-approved disinfectant wipe . If you use a cleaner, be sure it’s alcohol, bleach, phenol, and ammonia-free. Apply the disinfectant per its instructions and leave it on for the amount of time specified. [9] X Research source
-
Dry the dumbbells with a cloth. Do not allow iron dumbbells to air dry, as this can lead to rust. Instead, wipe away any excess disinfectant with a clean, dry lint-free cloth. Be sure they’re completely dry before putting them away. [10] X Research source
Advertisement
-
Scrub the rust with sandpaper or a wire brush. Use a fine-grit sandpaper or a wire brush to scrub off noticeable rust and prep the surface. [11] X Research source
-
Soak the dumbbells in vinegar and water. Fill a sink or basin with a half-water, half-vinegar solution and let your dumbbells soak for 24-48 hours. If they’re extra rusty, allow them to soak for up to 72 hours. The acid in the vinegar will dissolve the rust. [12] X Research source
- When you’re finished with the vinegar solution, don’t dump it in your yard, as it could kill your grass. Instead, pour it down a large drain.
-
Scrub off the remaining rust with a wire brush. After you remove the dumbbells from the solution, grab a wire brush to remove the rest of the rust . For stubborn spots, try applying WD-40 or a similar lubricant to loosen the bonds between the rust and the metal. [13] X Research source
-
Rinse and dry the dumbbells. Run the dumbbells under clean water to remove any residue, then dry them with a towel immediately. [14] X Research source
-
Apply a rust protector. Choose either a 3-in-1 oil or silicone-based rust protector and brush or spray on a thin coat. This helps prevent rust in the future. [15] X Research source
-
Spray paint the dumbbells (optional). Make sure your dumbbells are completely dry before painting. While this step is optional, repainting your dumbbells removes pitting and makes them look better. It also extends their lifespan as the paint protects the iron from moisture. Spray paint one side of each dumbbell and let it dry completely before painting the other sides. [16] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Aim to clean your dumbbells with soapy water once or twice a week. Wipe them down with disinfectant wipes after every use, and deep clean the crevices and knurling monthly. [17] X Research sourceThanks
- Avoid submerging your dumbbells in water, as it seeps into small areas and creates rust. Submerging neoprene or rubber dumbbells also degrades their material.Thanks
- Always store your dumbbells on a rack in a cool, dry place. Avoid damp or humid conditions.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
Neoprene, Rubber, & Vinyl Dumbbells
- Water
- Mild dish soap
- Bowl or basin
- Microfiber cloth or towel
- Sponge (optional)
- Spray bottle (for vinyl)
- Neoprene protectant spray (for neoprene)
- Vinyl protectant spray (for vinyl)
- Rubber conditioner (for rubber)
Adjustable Dumbbells
- Water
- Mild detergent
- Sponge or cloth
Iron Dumbells
- Water
- Dish soap
- Wire brush
- Cloths or towels
- EPA-approved disinfectant wipes or cleaner
Removing Rust
- Sink or basin
- Water
- Vinegar
- Wire brush
- Towel
- Rust protector
- Fine-grain sandpaper (optional)
- WD-40 (optional)
- Spray paint (optional)
References
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
- ↑ https://homegymmastery.com/cleaning-dumbbells/
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
- ↑ https://cleanestor.com/how-to-clean-dumbbells/#Step-By-Step_Guide_On_How_To_Clean_Dumbbells
- ↑ https://cleanestor.com/how-to-clean-dumbbells/#Step-By-Step_Guide_On_How_To_Clean_Dumbbells
- ↑ https://cleanestor.com/how-to-clean-dumbbells/#Step-By-Step_Guide_On_How_To_Clean_Dumbbells
- ↑ https://hortonbarbell.com/how-to-clean-dumbbells-and-remove-rust-iron-and-rubber/
- ↑ https://hortonbarbell.com/how-to-clean-dumbbells-and-remove-rust-iron-and-rubber/
- ↑ https://cleanestor.com/how-to-clean-dumbbells/#Step-By-Step_Guide_On_How_To_Clean_Dumbbells
- ↑ https://cleanestor.com/how-to-clean-dumbbells/#Step-By-Step_Guide_On_How_To_Clean_Dumbbells
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
- ↑ https://makesomethingmondays.com/craft-ideas/upcycled-crafts/how-to-remove-rust-from-old-dumbbells-and-weight-plates/
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
- ↑ https://makesomethingmondays.com/craft-ideas/upcycled-crafts/how-to-remove-rust-from-old-dumbbells-and-weight-plates/
- ↑ https://homegymhero.com/how-to-clean-dumbbells/
About This Article
Thanks to all authors for creating a page that has been read 2,994 times.
Advertisement