How to Convert Human Height in Centimeters to Feet

PDF download Download Article
PDF download Download Article

Depending on where you live, you're going to get radically different numbers for your height. That's because centimeters, which are on the metric system, are a much smaller unit than inches or feet, which are imperial units. Luckily, despite completely different number systems, anyone can convert centimeters to feet with a little patience and basic math skills.

Centimeters to Feet Converter

Method 1
Method 1 of 3:

Converting to Inches

PDF download Download Article
  1. Centimeters are used broadly in Europe, Canada, Asia, and most other countries using the metric system. Though Americans almost always measure height in feet, centimeters are much more common. For example, say you are 180 cm tall. [1]
  2. There are roughly .39 inches in every centimeter. If you are calculating by hand and need an easier approximation, you could even multiply by .4, though you will not be as accurate. Note that this answer to this equation is always smaller than the original number of centimeters. [2]
    • The fraction above stands for "inches per centimeter."
    Advertisement
  3. There are twelve inches in each foot, and the example has 70.2 total inches. If your divide 70.2 by 12, you get 5.85ft, but be careful -- the decimal is not the number of inches. Since , and you know that the height must be above 5ft but below 6ft. So, if you have 5 full feet in 70.2", then 60 of your inches are accounted for. You just have to deal with the last 10.2".
    • 5' + 10.2
  4. Once you know how many "perfect feet" fit into these inches, just add in the leftover to get your final answer!
    • 5' + 10.2"
    • 180 cm = 5'10.2
  5. Get more accurate measurements by using the more precise for your calculations. [3] If you need super accurate conversions, you must use a more accurate decimal for your conversion from centimeters to inches. To see it in action, note how the example above subtly changes.
    • 5' + 10.86"
    • 180cm = 5'10.9 [4]
    6. Advertisement

Method 2
Method 2 of 3:

Converting Directly to Feet

PDF download Download Article
  1. This is a direct conversion, though it does not tell you the number of inches, directly. Instead, it tells you the number of feet -- so an answer of 6.25ft doesn't mean someone is "six feet, 2.5 inches." It means he is "six and a quarter (25%) feet tall," or 6'3". Continuing the example from other methods:
  2. The integer, the whole number in the beginning, is the number of feet (in this case, 5). The decimal is the percentage of a foot added on. But this number isn't really helpful, since we never say "he is 5.9 feet tall." We give inches. Separate the two to begin to simple process.
  3. There are 12 inches in every foot, but you need to find out how many inches are in .905512 feet. To do so, simply multiply. If you have trouble remembering why, think about what you would do if you had 1 foot, and needed to know how many inches there were: . What if it was 6: . Now, what if the number was smaller than one, like .905? It's the same philosophy -- you get your inches based on the number of feet by multiplying by 12. [5]
  4. Simply add back in the integer (the number before the decimal) with your new inches calculation. You've converted! [6]
    • ' 180cm = 5' 10.9" [7]
    5. Advertisement
Method 3
Method 3 of 3:

Estimating the Conversion Accurately

PDF download Download Article
  1. Use simple percentages to get a basic estimation if you don't have a calculator. Remember that one centimeter equals roughly .39 inches. For estimation purposes, this means your height in inches is roughly 39% of your height in centimeters. To make this easier, round up to 40%. Now, since percentages in multiples of ten are so easy to figure out, you can get a quick approximation of your conversion. [8]
    • Remember that 10% of any number simply moves the decimal one move to the left.
    • Percentages always add to 100%, but can also be added anywhere in between. Thus, if you need to figure out 40% of a number, you can add 10% + 10% + 10% + 10%.
  2. This will give you one tenth of your height. To do so without a calculator, simply move the decimal one place over to the left. Thus, 100 → 10, 9.2 → .92, and .421 → .0421. To continue a common example:
    • Don't forget that 10% = .10, as percentages are just another way to write decimals (ie. 40% = .4, and 59% = .59, etc.)
  3. You have 10% of your height, but you need to estimate 40% of it. You can turn 10% into 40% by multiplying by four, and it doesn't matter what your actual percentages are. Simply substitute in your number from before and multiply by 4:
  4. If the number doesn't go in evenly, simply divide it as close as possible, then add in the remaining inches by feet. So, if you get 50 inches, you would have 4 feet, with two inches left over. The person is 4'2. In the example, the answer is 72 inches, or exactly 6 feet, since 72 divided by 12 is 6. This division doesn't have to be hard, since there are really only a few options for human height:
    • 12 inches = 1 foot.
    • 24 inches = 2 feet
    • 36 inches = 3 feet
    • 48 inches = 4 feet
    • 60 inches = 5 feet
    • 72 inches = 6 feet
    • 84 inches = 7 feet [9]
  5. Remember how 1 centimeter converts to .0328084 feet? Just like any other decimal this can be converted to a percentage, meaning 1 centimeter is actually 3.3% of each foot ( note: you convert a decimal to a percentage by multiplying it by 100 ). And, if you divide 10% by 3, you get roughly 3.3%. Now, just substitute your actual percentage for 10% in this equation and you have your estimation!
    • 6 feet, or 72 inches
      • Remember that a decimal in the answer is not the number of inches. To get that, multiply any remaining decimal by 12. [10]
  6. Remember the original estimation for centimeters and inches? You converted .39 to 39%, which was then rounded up to 40%. While this makes the solution easier, it slightly overestimates the conversion by adding this percentage point. As a result, you should know that all estimations will be just a touch higher.
    • You can make this slightly more precise by subtracting 1% from your initial number. So, instead of using 180cm, use 178.2cm. This is extra helpful if, instead of 180 cm, you get something more difficult, like 182cm. Knowing it will overestimate, cut it to 180.
    • When using precise decimals, 180 cm = 5' 10.9".
    • When estimating using the above methods, 180 = roughly 6 feet. They are only about an inch off -- but they are still different.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How many cm for height of 5'3"?
    Donagan
    Top Answerer
    5'3" is (5 x 12) + 3 = 60 + 3 = 63 inches. To convert to centimeters, multiply inches by 2.54.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 10
  • Question
    How do I round the centimeter height so it does not have a decimal point?
    Community Answer
    If the decimal portion is less than 0.5, then simply discard it. If it is 0.5 or greater, then add 1cm to the number on the left of the decimal point and discard the decimal. E.g: values like 178.1 to 178.4 have a decimal less than 0.5, so the rounded off value is 178. With a value like 178.5 to 178.9 the rounded off value is 179.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
  • Question
    What formula do I use for this solution?
    Donagan
    Top Answerer
    If you're converting centimeters to feet, use the conversion factor shown in Method 2, Step 1 above.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 3
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Try not to forget that the decimal after the feet is not the number of inches. 4.3 does not mean "Four foot, three inches." It means you are four feet tall plus .3 foot tall, or 30% of a foot. You must multiply this decimal by 12 to get inches.
        Thanks
        Helpful 2 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Convert Centimeters to Inches
      °C to °F Conversion: A Complete Guide
      How to
      Convert from Decimal to Binary
      Converting Binary to Decimal: Positional Notation & Doubling
      How to
      Calculate Volume in Litres
      How to
      Convert a Number from Decimal to IEEE 754 Floating Point Representation
      How to
      Convert Milliliters (mL) to Grams (g)
      Converting Minutes to Hours in Decimal or Hour & Minute Format
      Convert from Decimal to Hexadecimal: A Quick Guide + Examples
      Conversion Factor for Grams to Kilograms (and Kilograms to Grams)
      Convert Pounds to Kilograms with These Easy Tricks
      How to
      Convert Kilometers to Miles
      How to
      Convert Hexadecimal to Binary or Decimal
      How to
      Convert Binary to Hexadecimal
      Advertisement

      References

      1. ↑ https://www.checkyourmath.com/convert/length/feet_cm.php
      2. ↑ https://www.calculatorsoup.com/calculators/conversions/heightftcm.php
      3. ↑ https://www.inchcalculator.com/convert/centimeter-to-inch/
      4. ↑ https://www.checkyourmath.com/convert/length/feet_cm.php
      5. ↑ https://www.thecalculatorsite.com/conversions/common/cm-to-feet-inches.php
      6. ↑ https://www.thecalculatorsite.com/conversions/common/cm-to-feet-inches.php
      7. ↑ http://www.manuelsweb.com/ft_in_cm.htm
      8. ↑ http://www.mathsisfun.com/numbers/estimation.html
      9. ↑ http://www.rapidtables.com/convert/length/inch-to-feet.htm
      1. ↑ http://www.virtualnerd.com/middle-math/ratios-proportions-percent/solving-estimating/percent-estimate-example

      About This Article

      Article Summary X

      To convert human height from centimeters into feet, multiply the number of centimeters by 0.03280. For example, if you're 180 centimeters tall, you would multiply 180 by 0.03280 to get 5.9. Next, separate the decimal point from your result to work out how many inches you need to add to the 5 feet. Since 0.9 multiplied by 12 is 10.8, you can round the result up to the nearest inch and say that someone who is 180 centimeters tall is approximately 5 foot 11 inches. To find out how to convert centimeters into inches, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 277,005 times.

      Did this article help you?

      Advertisement